Edgebanding 30223E5M, Weekend Getaway .020" Thick x 15/16" Width

Edgebanding 30223E5M Weekend Getaway For Clean Edges

Edgebanding 30223E5M Weekend Getaway is a PVC edge banding from Doellken Woodtape that finishes exposed edges on panel projects, so raw substrate edges are covered with a color-coordinated strip. The .020 inch thickness pairs a slim profile with a defined edge appearance, which suits casework and shelving where a lighter edge detail is preferred. The 15/16 inch width covers standard panel thicknesses with a slight overhang, giving room to trim flush without exposing the core. Supplied in a 600 foot roll, this edge banding supports longer runs and multiple cabinets using the same design, which helps keep finish edges consistent across a job. The Weekend Getaway color is specified as a laminate match to Tafisa M2003Y in the VIVA collection, so face panels and edges can carry the same design tone on finished work.

Key Weekend Getaway Edge Banding Details

• This edge banding is identified as Doellken Woodtape PVC, which indicates a PVC construction suited to typical cabinet and furniture panel environments where a thermoplastic edging is required.
• The .020 inch stated thickness defines a relatively thin PVC edge, which helps create a clean, compact edge line while still masking the underlying panel edge in normal installations.
• The 15/16 inch width is wider than a 3/4 inch panel face, providing extra material for trimming so the finished edge can be flush to the surface without leaving reveal at the substrate.
• The product is supplied in a 600 foot roll length, which supports edging multiple components in the Weekend Getaway design on a single job or across repeat work using the same laminate.
• The color is described as a laminate match to Tafisa M2003Y, Weekend Getaway, VIVA, so edge banding and Tafisa decorative panels can visually coordinate on doors, drawer fronts, and case sides.

Weekend Getaway Edge Banding Fit And Handling

This Doellken Woodtape PVC edge banding is categorized as edge banding and surfacing material, so it is intended for bonding to exposed panel edges in cabinetry and similar woodworking applications. With a .020 inch thickness, the banding works where a thinner edge is preferred around doors or interior components, helping reduce visual bulk at the edge while still covering the core. The 15/16 inch width accommodates common panel sizes with enough material to trim back after bonding, which supports a uniform flush edge around cabinet parts. The 600 foot roll format helps maintain color continuity from piece to piece during production runs featuring Tafisa M2003Y Weekend Getaway faces.

Using Weekend Getaway Edge Banding In Projects

Where This Weekend Getaway PVC Edging Fits

This edge banding is identified by Wurth Baer Supply under the edgebanding and surfacing category, which positions it for use on cabinet, furniture, and casework edges where panel faces use coordinated decorative surfaces. The Weekend Getaway designation and laminate match to Tafisa M2003Y, VIVA, tie this banding to projects built around that specific Tafisa color, so fronts, ends, and shelves can present a unified appearance. The .020 inch thickness lends itself to applications such as cabinet interiors, closet components, and light-duty furniture parts that benefit from a slim edge detail matching the panel face. With the 600 foot roll length, shops can run a full set of cabinets, closet sections, or shelving units in the Weekend Getaway design without mixing lots, helping panels and edges track the same tone across the installation.

Details That Support Consistent Edge Results

The 15/16 inch width on this Doellken Woodtape PVC edge banding provides usable overhang on standard panel thicknesses, which is important when trimming edges flush to the surface after bonding. That added width allows trimming tools to cut back the banding without risking exposure of the underlying board edge, supporting a smooth transition from face to edge. The defined .020 inch thickness means the edge build remains modest, so corners, door reveals, and shelf fronts maintain a neat profile that aligns with adjacent components. Because the color is specified as a laminate match to Tafisa M2003Y Weekend Getaway in the VIVA line, installers can align edge strips and panel faces so grain and tone work together visually. The continuous 600 foot roll format also reduces color shifts between pieces, supporting repeatable results when multiple cabinets or sections share the same design code.

Common Questions About Weekend Getaway Edgebanding

Select Weekend Getaway Edging For Tafisa Panels

Choosing this Doellken Woodtape PVC edge banding in the Weekend Getaway color ties panel faces and edges to the Tafisa M2003Y, VIVA design code. The .020 inch thickness and 15/16 inch width support a neat, trim-ready edge across standard panels, while the 600 foot roll length serves extended cabinet or casework runs. For projects built around Tafisa M2003Y Weekend Getaway, this dedicated laminate-match edging from Wurth Baer Supply provides a coordinated way to finish exposed edges.