Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PVC edgebanding 30227UM Casting at First Light gives casework, shelves, and fronts a finished PVC edge that visually ties into Tafisa M2007Y Casting at First Light VIVA laminate, so the board face and edge read as one coordinated surface on the job.
The 15/16 inch width covers standard panel thickness with a bit of overhang, which supports clean trimming while still protecting the core from exposure around the entire edge. That helps reduce visible core lines along cabinet sides and tops.
The 0.020 inch thickness creates a slim profile on the edge, so doors and panels keep a refined look without a bulky band while still masking the substrate. That balance matters when building runs of cabinets that need consistent reveals.
The 600 foot roll length supports longer production runs of the same Tafisa color without frequent roll changes, helping maintain color continuity from part to part during cutting, banding, and assembly.
The 15/16 inch width gives coverage across common panel thicknesses, leaving enough excess for flush trimming while still fully wrapping the edge, which supports tight glue lines and clean edges after trimming operations.
The 0.020 inch thickness keeps the band low profile at the edge, so after trimming and finishing, adjacent doors, drawer fronts, and panels sit with consistent gaps instead of being pushed apart by a thick edge layer.
The 600 foot roll format lets shops set up a run in this specific Casting at First Light color and work through many parts in sequence, which helps maintain speed on edgebanders and keeps color transitions off visible cabinet runs.
This PVC edgebanding is defined for Tafisa M2007Y Casting at First Light VIVA laminate, so it is suited to projects built around that specific design where the laminate face and edge must stay visually coordinated on cabinets, casework, and fixtures.
When panels are laminated with Tafisa M2007Y, applying this edge banding around shelves and verticals keeps the Casting at First Light tone running across every exposed edge, which supports continuous lines along cabinet runs and tall storage units.
The 15/16 inch width helps on standard carcass parts because it spans the thickness of common board materials with a margin for trimming, so fabricators can run parts through an edgebander and expect reliable coverage on both faces of the edge.
On long shelves or tall panels, the 600 foot roll length means multiple pieces can be edged from the same roll segment, which helps large installations keep the same batch of Casting at First Light color on every exposed edge in a room.
The 0.020 inch thickness works with trimming operations to leave a subtle edge that does not project far past the laminate surface, which supports accurate reveals at doors, drawer fronts, and panel joints after assembly.
Because the band is defined as PVC edgebanding rather than generic surfacing, it is intended for edge applications where a formed strip must wrap and adhere along the board perimeter, which supports more predictable results on line edgebanders.
The explicit laminate match reference to Tafisa M2007Y Casting at First Light VIVA helps designers and shops align specifications, so the same color code can be written for both laminate and edge banding across drawings and cut lists.
The manufacturer identifier 30227UM-1520-1 connects directly to this 15/16 inch, 0.020 inch, 600 foot configuration, which simplifies set-up notes and helps future replacements reference the exact same edge size and color without re-matching in the field.
This PVC edgebanding matches Tafisa M2007Y Casting at First Light VIVA laminate, so the edge color coordinates with that specific laminate decor on cabinets and casework.
This edgebanding is 15/16 inch wide and 0.020 inch thick, giving coverage for common panel thicknesses while keeping a slim, low-profile edge after trimming.
The Doellken Woodtape PVC edgebanding roll is 600 feet long, supporting extended edging runs in the same Casting at First Light color without frequent roll changes.
The manufacturer part number is 30227UM-1520-1, which identifies this specific 15/16 inch by 0.020 inch, 600 foot Casting at First Light PVC edgebanding.
This Casting at First Light strip is PVC edgebanding in the edge banding product class, designed to finish and protect exposed panel edges in laminate-based projects.
This PVC edgebanding is manufactured by Doellken Woodtape, so shops work with a dedicated edge banding brand when finishing Tafisa Casting at First Light projects.
For projects built around Tafisa M2007Y Casting at First Light VIVA laminate, this Doellken Woodtape PVC edgebanding provides a 15/16 inch, 0.020 inch, 600 foot roll that aligns color, size, and format with cabinet and casework edge finishing needs.
Sold In: 600 Lineal Ft