Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding 30230UM After-Hours describes a Doellken Woodtape PVC edge banding that finishes exposed panel edges so raw core is covered and protected in everyday cabinet or casework use. The .020 inch thickness gives a slim, workmanlike edge that dresses melamine or laminate panels without adding bulk, which helps edges sit close to adjacent fronts and hardware lines. The 15/16 inch width spans typical 3/4 inch panels with a small trim margin, allowing the installer to flush-trim back to the face for a tight, finished line. The laminate match to Tafisa M2010Y After-hours VIVA ties the edge visually to that specific panel design, which helps projects maintain color and pattern continuity from face to edge. Being part of Wurth Baer Supply's edgebanding offering places this product within a broad woodworking-focused range, which supports trade use on commercial or residential jobs that follow Tafisa After-hours VIVA designs.
The .020 inch thickness on this PVC edgebanding keeps the profile modest, which supports smooth trimming and reduces the amount of edge material that needs to be flushed off in shop or field settings. Its 15/16 inch width works well with standard 3/4 inch board thickness, leaving just enough excess for trimming operations while still handling easily on edgebanders or manual applicators. Because this product is matched to Tafisa M2010Y After-hours VIVA laminate, installers can run it on panels using that design and expect the edge to visually line up with the specified surface, which simplifies layout decisions around door, drawer, and panel orientation. In combination, the thickness, width, and color match support a straightforward installation sequence focused on trimming to a clean, consistent edge.
This PVC edge banding belongs in projects built around Tafisa M2010Y After-hours VIVA laminate, because its described laminate match directly targets that design. When working on cabinets, closets, or casework using that Tafisa color, the .020 inch thickness and 15/16 inch width let fabricators edge shelves, doors, and gables while staying close to standard panel sizes. In shops set up with edgebanding equipment for PVC, the dimensions work within common settings, supporting continuous runs of After-Hours casework components in a repeatable way. For small-batch or serious DIY builds that also follow Tafisa M2010Y After-hours VIVA, the same sizing helps manual application, since there is trim margin without excessive overhang along the panel face.
The .020 inch thickness is light enough that, once applied, the transition from face to edge remains subtle, which helps doors and drawer fronts sit neatly against each other without a bulky feel at the seams. The 15/16 inch width supplies coverage beyond the face of a 3/4 inch panel, so minor panel variation or saw marks are hidden after trimming, supporting a more forgiving workflow when cutting or handling multiple components. Because the product is specifically described as a laminate match to Tafisa M2010Y After-hours VIVA, fabricators can build entire runs of that color and keep edge details consistent from part to part, simplifying reorders tied to the 30230UM-1520-1 part number. Together, these details reduce visual inconsistencies across a project and help repeat the same finished look when using the same Tafisa After-hours VIVA panels in future jobs.
This After-hours edgebanding is described as PVC edgebanding, so it uses a PVC formulation that suits laminate and surfacing projects needing matched edge treatment.
The Edgebanding 30230UM After-Hours strip is .020 inch thick, which provides a slim, workable edge that trims easily while covering exposed panel cores.
The 15/16 inch width serves projects using typical 3/4 inch panels by providing coverage plus a small trim margin for flushing edges to the panel face.
This edge banding matches Tafisa M2010Y After-hours VIVA laminate, so it visually ties the edge to panels using that specific Tafisa design.
The 30230UM-1520-1 part number identifies this specific Doellken Woodtape After-hours .020 inch by 15/16 inch edgebanding configuration for ordering and repeat jobs.
A 600ft roll length supports longer cabinet or casework runs in the same After-hours finish, reducing downtime for roll changes during production.
This Doellken Woodtape PVC edge banding ties directly to Tafisa M2010Y After-hours VIVA laminate in a .020 inch thick, 15/16 inch wide format that suits typical 3/4 inch panels. For cabinet, closet, or casework projects built around that specific Tafisa design, choosing this 30230UM-1520-1 configuration through Wurth Baer Supply aligns edge color, size, and roll length with production needs so exposed panel edges match the intended After-hours VIVA finish from part to part.
Sold In: 600 Lineal Ft