Edgebanding 30222UM, Sunset Cruise 1mm Thick x 15/16" Width

Edgebanding 30222UM Sunset Cruise For Tafisa Boards

Edgebanding 30222UM Sunset Cruise gives you a 1mm thick, 15/16 inch wide PVC edge banding that covers raw panel edges and creates a finished look that tracks with the face material across cabinet runs. The Doellken Woodtape brand identifies this as a dedicated edging product, so it is built to work as the visible edge on casework, shelves, and doors where a consistent appearance across multiple components matters. The 15/16 inch width provides coverage for typical 3/4 inch panel edges with room to trim, which supports cleaner routing and scraping without exposing core material. The 1mm thickness provides a substantial edge profile once trimmed, which helps panels feel solid at touch points such as cabinet fronts. The 300 foot roll length referenced in the description supports edging multiple cabinets or a full job run without repeated roll changes.

Key Edgebanding 30222UM Sunset Cruise Details

• The 15/16 inch width spans standard 3/4 inch board edges with trim allowance, which supports straight-edge or radius trimming while keeping core material covered along the full run.
• The 1mm thickness provides more edge material than thin tape, which gives routers and trimmers a consistent bite and helps create a clean, uniform arris on high-contact edges.
• The PVC material places this product in the Edgebanding, PVC category, which suits cabinet and furniture panel work where a thermoplastic edge is preferred for shaping and profile consistency.
• The 300 foot roll length noted in the description allows longer continuous runs along cabinet sides, shelves, or tall panels, which reduces seams at joints and corners on multi-part assemblies.
• The Doellken Woodtape brand aligns this product with a dedicated edge banding line, which helps keep color and sheen consistent across different jobs that repeat the same panel design.

Edgebanding Installation Fit And Panel Coverage

The 15/16 inch width on this edge banding is sized to cover a typical 3/4 inch panel edge, so installers have margin on both sides for trimming flush without risking exposed substrate during routing. The 1mm thickness gives trimming tools a defined edge to register against, which helps keep passes steady and reduces chatter that can show as waviness along the edge. Being PVC, the material responds well to common edge banding equipment designed for thermoplastic tape, so feed systems and trimming stations can work within their standard settings for similar PVC products. The 300 foot roll length supports loading a single roll on automatic edge banders for extended runs, which helps maintain set-up alignment from the first panel to the last piece in the job.

Using Sunset Cruise Edge Banding In Real Projects

Where This Edge Banding Matches Tafisa Panels

This edge banding is identified as Edgebanding 30222UM, Sunset Cruise 1mm Thick x 15/16 inch Width, which positions it as a specific match to Tafisa decorative panels in the same design family. The web description states a color match to Tafisa M2002Y Sunset Cruise Urbania with a good rating, so it visually tracks that surface for casework built from Urbania panels. The same description also states a color match to Tafisa M2002Y Sunset Cruise VIVA with a good rating, so it supports projects that mix or switch between those Tafisa finishes while keeping the edge tone aligned. Because it is categorized as Edgebanding, PVC, it serves as the transition between Tafisa faces and exposed edges on cabinets, closets, or commercial casework using that board.

Why Dimensions And Roll Length Support Workflow

The 15/16 inch width of this PVC edge banding leaves usable overhang on a 3/4 inch substrate, which gives automatic and manual trimmers room to work without cutting into the face, supporting repeatable results across long runs. The 1mm thickness provides a defined shoulder after trimming, which helps edges resist minor handling during transport and installation of completed cabinets. The manufacturer part number 30222UM-1540-10 uniquely identifies this Sunset Cruise variant, which simplifies reordering the same edging so replacement parts or future add-on cabinets maintain the original match. The 300 foot roll length described for this product supports longer setup cycles on edge banding machines, so operators can run full banks of parts in one sequence and keep color, texture, and feed settings stable throughout the batch.

Common Questions About Sunset Cruise Edge Banding

Select Sunset Cruise Edgebanding For Tafisa Runs

Choose Edgebanding 30222UM Sunset Cruise 1mm Thick x 15/16 inch Width when working with Tafisa M2002Y Sunset Cruise Urbania or VIVA panels and needing PVC edging that visually tracks those designs. The Doellken Woodtape brand, 300 foot roll length, and defined dimensions support production-friendly use on edge banders and handheld edgers across full cabinet or furniture projects that share this Tafisa finish.