
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Flat rail barn door hardware kit describes a 6.5 foot flat rail system that carries a rolling barn door along a straight track, giving a wide opening while the door slides parallel to the wall instead of swinging out. This Pro Value Series kit is built as rolling barn door hardware, so it supports a door that moves on wheels along the rail for steady, guided travel across the opening. The 78 inch flat rail length suits many single-door residential or light commercial openings where a full-width clear opening is needed. A stainless steel finish on the visible hardware keeps the rail, rollers, and clamps visually consistent along the run, which helps the hardware read as one continuous assembly once the door is mounted. Door weight capacity of 300 lb allows use with substantial doors, giving flexibility for heavier wood panels or similar door constructions.
This top mount barn door hardware kit relies on sliding door rollers that connect at the top of the panel, so the load from a 300 lb capacity door transfers directly to the flat rail. The 78 inch flat rail length defines how far the door can travel, which lets the installer size the opening within that rail span during planning. Clamps for fixing to the rail secure the hardware along the track, keeping roller positions consistent so the door runs square to the rail. Door stoppers at each end of the rail limit sliding travel, helping position the closed and open stops without rework once they are set. Anti-jump blocks interact with the door and rail to resist the rollers lifting free of the track, which helps the door stay engaged on the rail during normal operation.
This rolling barn door hardware kit from the Pro Value Series belongs in projects that call for a flat rail and a single sliding panel traveling across an opening within a 78 inch rail span. The 300 lb door weight capacity supports applications using heavier doors, so solid or dense door constructions can be carried on the same rail system. Top mount sliding door rollers attach to the upper edge of the door, which keeps hardware concentrated along the top and leaves the main face of the panel free for trim, panels, or other design elements. Clamps for fixing to the rail locate the hardware along the track, which helps keep the door aligned with the opening when positioned for closure or full access. The floor guide sits at the base of the opening to steady the door, so the panel travels in one plane without swinging at the bottom edge as it moves.
The 6.5 foot (78 inch) flat rail provides one continuous track surface, so the sliding door rollers meet a uniform running surface along the entire travel path, which supports predictable rolling resistance from fully closed to fully open. A stainless steel finish on the visible barn door hardware parts gives an even appearance along the assembled rail, clamps, stoppers, anti-jump blocks, and rollers, which helps projects where the hardware is a visible design element. Door stoppers located at each end of the rail define both travel limits, allowing repeatable stopping points that keep the door aligned with trim or casing when closed. Anti-jump blocks act at the rail and door interface to resist upward movement of the rollers, which helps maintain engagement on the track during everyday use. A floor guide at the bottom of the opening works with the overhead rail to control the plane of movement, so the door slides in a consistent path without lateral drift as it rolls. A soft-close mechanism is sold separately, so this kit serves as the main rolling structure while leaving room to add soft-close functionality when that operation is desired.
The barn door kit has a door weight capacity of 300 lb, which allows it to carry substantial doors while still operating on the same flat rail track.
The hardware kit uses a 78 inch flat rail, so the sliding door travels across that rail length to cover or clear the opening.
The top mount hardware uses sliding door rollers fixed at the top edge of the door, so the load transfers from the panel directly into the flat rail.
The kit uses anti-jump blocks at the rail and door interface, which resist the rollers lifting off the track during normal sliding movement.
A floor guide works with the overhead flat rail to steady the bottom of the door, helping the panel move in a single vertical plane.
A soft-close mechanism is sold separately, so this kit provides the main flat rail and rolling function while allowing separate soft-close selection.
This Pro Value Series 6.5 foot flat rail barn door hardware kit pairs a 78 inch stainless steel finish rail with top mount sliding door rollers, clamps, door stoppers, anti-jump blocks, and a floor guide, all rated for a 300 lb door. That combination gives a defined rail span, a clear mounting style at the top of the door, and guiding at both the rail and floor line. For projects needing rolling barn door hardware in stainless steel finish within this weight range, this kit offers a coordinated set of components ready to be integrated into the opening layout.
Sold In: 1 Kit
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UF77519-59-200 Mfr# 77519 59 200 | Door Handle Latch for Barn Door, Satin Nickel Finish | ||||
Sold in: 1 Each | UF77519-59-309 Mfr# 77519 59 309 | 205mm Fleur-de-lys Handle Pull, Satin Nickel | ||||
Sold in: 1 Each | UF77519-59-312 Mfr# 77519 59 312 | 197.5mm Octagon Handle Pull, Satin Nickel | ||||
Sold in: 1 Each | UF77519-59-306 Mfr# 77519 59 306 | 195.5mm Rectangle Handle Pull, Satin Nickel | ||||
Sold in: 1 Each | UF77519-59-315 Mfr# 77519 59 315 | 193.1mm Rounded Handle Pull, Satin Nickel | ||||
Sold in: 1 Each | UF77539-59-300 Mfr# 77539 59 300 | 142mm Flush Handle Pull, Satin Nickel | ||||
Sold in: 1 Each | UF77539-59-303 Mfr# 77539 59 303 | 180mm Flush Handle Pull, Satin Nickel |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Kit | UF77259-56-105 Mfr# 77259 56 105 | Flat Rail Connector, Stainless Steel Finish |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Kit | UF77919-56-102 Mfr# 77919 56 102 | By-passing Door Bracket, Stainless Steel finish |