Equiline LED 3W Cool White Puck Light Use

Equiline LED 3W Cool White Puck Light delivers a compact 3 watt, 12 volt LED source that provides focused illumination while keeping power demand low, which helps when multiple puck lights are tied into a single low-voltage layout. The 5000K cool white output creates a bright, neutral-toned light that helps reveal detail on work surfaces and cabinet interiors, supporting accurate work and clear product display. The 2-1/4 inch diameter bore hole and 7/16 inch height give this puck a low-profile footprint that fits standard recess cutouts, which simplifies layout when working across multiple cabinets or shelves. The nickel finish coordinates with many contemporary hinges, pulls, and fixtures, allowing the lighting to visually blend into hardware-centric woodworking projects. The 60 degree beam spread focuses light into a defined cone, which is useful when you want to highlight specific areas without washing adjacent surfaces.

Key Equiline LED Puck Details For Projects

• The 3 watt, 12 volt design supports efficient low-voltage runs, which matters when planning driver capacity across several Tresco Lighting puck locations.
• The 5000K cool white color temperature gives a crisp, bright tone that helps users see true surface detail during tasks or while viewing cabinet contents.
• The 2-1/4 inch diameter bore hole and 7/16 inch height define the recess cavity, guiding drilling depth and spacing across doors, partitions, and shelves.
• The 60 degree beam spread directs light into a controlled area, helping limit stray light and concentrate illumination where the cabinet design needs it.
• The 25,000 hour bulb life rating reduces the frequency of light replacement, which is helpful once pucks are recessed into finished cabinetry.
• The 79 inch cord attached to each LED puck offers reach back to the power supply location, giving flexibility for routing inside cabinets or valances.

Mounting And Power Setup For This Puck

This Tresco Lighting puck is designed for recess mount use, so the 2-1/4 inch diameter bore hole sets the cut size needed during cabinet fabrication or retrofit work. The shallow 7/16 inch height means the recess depth remains modest, which helps when working in thinner cabinet tops or tight soffit areas. A 79 inch cord is attached to each LED puck, giving a defined length to route through grommets or chase spaces toward the driver location. This puck operates at 12 volts and 3 watts, so it draws from a low-voltage power supply rather than line voltage. When the installation is not dimmed from a wall dimmer, the required power supply aligns with specific Tresco Lighting part numbers listed for this light, which keeps the system components matched.

Where This 3 Watt Puck Fits Best

Recess Mount Puck Light In Cabinetry And Shelving

This Equiline LED 3W Cool White Puck Light uses a recess mount layout, so it seats into the 2-1/4 inch diameter bore hole for a clean, built-in appearance in cabinet ceilings, display cases, or shelving. The 7/16 inch height keeps the body low inside the recess, which helps when space above the mounting surface is limited, such as shallow header boards or compact valances. The 5000K cool white color makes it suitable where bright task or display lighting is preferred, such as over counters, in glass-front cabinets, or inside commercial casework. The 60 degree beam spread shapes the light into a defined cone, helping installers aim illumination onto specific objects or work zones without excessive spill into adjacent compartments.

Details That Support Consistent Low-Voltage Results

The 3 watt power draw at 12 volts helps keep overall system load predictable when planning multiple Tresco Equiline LED puck lights on one circuit, which is important when selecting an appropriate driver size. The stated 25,000 hour bulb life rating supports long operating periods before the light output is expected to decline, which is particularly useful once pucks are permanently recessed into finished millwork. The 79 inch cord attached to each LED puck gives a fixed wiring length that can be factored into cable routing, junction placement, and driver positioning behind or above the cabinet run. When the system is not dimmed from a wall dimmer, the required power supply part numbers listed for this puck tie the light to compatible Tresco Lighting drivers, which supports consistent low-voltage operation across the installation.

Common Questions About This Tresco Puck Light

Selecting This Puck Light For Your Layout

The Tresco Lighting Equiline LED 3W Cool White Puck Light, Nickel, pairs a 3 watt 12 volt load with a 2-1/4 inch recess mount bore hole and 7/16 inch height, giving clear dimensional and electrical parameters for cabinet or display projects. The 5000K cool white light, 60 degree beam spread, and 25,000 hour bulb life support long-term task or showcase lighting where bright, focused illumination is needed. With a 79 inch cord attached and defined compatible power supplies when wall dimming is not used, this puck integrates cleanly into low-voltage layouts in woodworking and casework installations.