Equiline LED 3W Warm White Puck Light Use

Equiline LED 3W Warm White Puck Light describes a 3 watt, 12 volt LED puck from Tresco Lighting that delivers 3000K warm white light, giving cabinets and work areas comfortable illumination that matches typical warm interior lighting for consistent color in a run. The 2-1/4 inch diameter bore hole size defines the cutout needed for recess mounting, so shop layouts and jigs can be planned for repeatable installations. At 7/16 inch height, the puck sits shallow in the cabinet, helping keep interior clearances and shelf space usable once installed. The 60 degree beam spread concentrates light over a defined area, which helps highlight tasks or display items without spilling too far into surrounding surfaces. A stated bulb life of 25,000 hours supports long-term projects where reducing changeouts keeps service work off the schedule.

Key LED Puck Details For Job Planning

• The 3 watt, 12 volt rating sets power demand, helping match this puck with appropriate low voltage layouts and wiring runs on a project.
• The 3000K warm white color temperature keeps cabinet and task lighting in a warm range, supporting consistent tone with many residential interiors.
• The 2-1/4 inch diameter bore hole and 7/16 inch height give clear recess mount dimensions, simplifying template making and production drilling.
• The 60 degree beam spread focuses light where it is needed, which helps position pucks effectively in cabinets, displays, and work areas.
• The 79 inch cord attached to each LED puck offers reach to a power distribution point, useful when routing leads through cabinets or casework.
• The stated bulb life of 25,000 hours supports longer service intervals, which can reduce return trips for maintenance on installed projects.

Mounting And Power Details For This Puck

This Equiline LED puck uses a recess mount design, so the 2-1/4 inch diameter bore hole guides bit selection and drilling steps during cabinet production. The 7/16 inch height means the fixture sits relatively low in the cavity, which helps keep interference minimal with shelves or stored items. The puck operates at 12 volts and 3 watts, so it works within typical low voltage lighting layouts that are common in cabinetry and display work. Each LED puck has a 79 inch cord attached, giving installers flexibility when routing wires back to a centralized power supply location inside or behind cabinetry. A power supply is required when the system is not dimmed from a wall dimmer, and this puck is specified with compatible power supply item numbers RSLDC-ELT6WP-CON1, RSLDC-ELT15WP-CON1, RSLDC-ELT18-CON-1, or RSL-DCE60D-CON-1 for matching components.

Using This Tresco Equiline Puck On Projects

Where This Recess Mount LED Puck Fits Best

The Equiline LED 3W warm white puck light from Tresco Lighting is part of the Equiline line, giving a defined product class for cabinet and display lighting work. Its recess mount design and 2-1/4 inch bore hole sizing make it suitable for built-in lighting in cabinet ceilings, display cases, and similar millwork where a flush, integrated look is desired. The 3000K warm white output pairs well with many kitchen, bath, and residential built-in applications where warm tones are preferred over cooler light, helping unify the look of undercabinet and interior lighting. With a 60 degree beam spread, this puck can be located to wash light over counter sections, shelves, or featured items in a case while limiting stray spill, which can be important in tight, finished spaces. The 7/16 inch height provides a low-profile presence inside the recess so structural materials behind the panel typically retain more strength.

Why These Equiline Details Support Repeatable Results

The combination of a specific 2-1/4 inch bore hole and recess mount layout allows shops to build jigs and CNC programs that repeat across runs, improving speed and reducing layout variability from job to job. The 12 volt, 3 watt rating offers a known load per fixture, so designers and installers can count the number of pucks and select from the specified power supply options RSLDC-ELT6WP-CON1, RSLDC-ELT15WP-CON1, RSLDC-ELT18-CON-1, or RSL-DCE60D-CON-1 with confidence that components match. The 79 inch cord attached to each LED puck gives generous length to route through cabinet partitions and backs toward a power location, which supports cleaner interior layouts. A bulb life of 25,000 hours means once the fixtures are installed and wired, they are built for long service under typical use, limiting disruption to finished spaces. The 1 year warranty adds an additional layer of stated product support from Tresco Lighting for completed installations.

Common Questions About This Equiline LED Puck

Choose This Equiline Puck For Warm Cabinet Lighting

The Equiline LED 3W warm white puck light in nickel pairs a 3000K warm white output with a recess mount 2-1/4 inch bore hole design, fitting built-in cabinet and display work where a clean, integrated look is important. Its 3 watt, 12 volt load and 79 inch cord simplify planning for low voltage layouts and wiring paths across a project. With a 60 degree beam spread, 7/16 inch height, 25,000 hour bulb life, and 1 year warranty, this Tresco Lighting puck gives cabinet shops and installers defined specifications for consistent, repeatable lighting results.