3"/96mm Skyline Decorative Bar Pull, Slate

Skyline Decorative Bar Pull For Cabinet Projects

Skyline decorative bar pull from the Skyline collection gives cabinets a defined bar-style grip, which provides a straight, easy handhold for drawers and doors in residential or shop builds. This pull from Berenson Corporation is a handle and pull product, so it serves as the main touchpoint on the cabinet front where users open and close every day. The bar pull design in a slate finish creates a consistent linear look across a run of cabinets, which helps installers keep visual lines aligned along doors and drawer fronts. The pull is made from zinc, so it offers a metal feel that suits typical cabinet environments and pairs with other metal hardware in the project. With a slate finish over the zinc material, the pull presents a darker tone that can match or contrast surrounding surfaces to meet the design plan.

Key Skyline Bar Pull Details For Cabinet Work

• The center to center measurement is 3 inches and 3-3/4 inches, so this pull offers two mounting options that let installers match existing hole patterns on many cabinet fronts and reduce the need for patching and re-drilling.
• The pull length of 4-13/16 inches spans beyond both hole spacings, which provides full bar coverage over the mounting points and creates a wider grip area across the drawer or door front.
• The projection is 1-1/16 inches, so the bar stands off the cabinet face enough for fingers to wrap behind the pull, supporting comfortable everyday use on doors and drawers.
• The width of 5/8 inch defines the front profile of the bar, giving a slim appearance while maintaining a consistent surface for hands to contact when operating the cabinet.
• The screw size is 8-32 x 1 inch, which aligns with common cabinet hardware threads and length, helping installers follow familiar drilling and tightening routines when setting the pull on standard door and drawer materials.

Cabinet Pull Fit, Hole Spacing, And Hand Clearance

The dual center to center layout of 3 inches and 3-3/4 inches gives this Skyline decorative bar pull flexibility when aligning to cabinet fronts, because the same pull can be set on different pre-drilled patterns across a job. The 4-13/16 inch overall length keeps the bar extending beyond either mounting choice, which maintains a consistent visual span even when the mounting holes vary. With a projection of 1-1/16 inches, the pull stands proud of the cabinet surface so users can comfortably hook fingers behind the bar instead of grasping at the door edge. The 5/8 inch width shapes how the pull feels in the hand, providing a narrow but solid face that suits repeated opening and closing during normal cabinet use.

Using Berenson Skyline Pulls In Real Cabinet Runs

Where This Skyline Decorative Bar Pull Fits Best

This 3 inch and 96mm center to center Skyline decorative bar pull works on cabinet doors and drawers that follow either of those drilling patterns, which is common in many kitchen, bath, and shop layouts. Because the category is handles and pulls within decorative hardware and moldings, the pull suits visible cabinet faces where appearance and function both matter. The slate finish gives the hardware a specific darker tone, so it can be selected for projects that call for that color family on face frames or frameless cabinet fronts. As a zinc pull from the Skyline collection, it coordinates with other Skyline pieces using the same material and finish, allowing installers to carry one consistent style through a room of cabinets.

Why These Skyline Pull Details Support Consistent Results

The combination of 3 inch and 3-3/4 inch center to center options on one Skyline decorative bar pull lets installers standardize on a single Berenson Corporation part number, 1121-1SLT-P, while covering different cabinet drilling schemes across a project. The 4-13/16 inch length means each installed pull maintains a similar visual footprint, which keeps runs of doors and drawers looking aligned even when underlying hole spacing varies. The 1-1/16 inch projection supports comfortable grip clearance, so users interact with the pull rather than the cabinet edge, reducing wear at the door corners over time. With a 5/8 inch width, the bar presents a lean profile that lines up neatly along rails and stiles, helping installers achieve straight sightlines when multiple pulls are set on a bank of fronts. The slate finish on zinc ties these functional details together by giving the hardware a unified appearance, which matters when the same pull repeats many times across a cabinet installation.

Common Questions About The Skyline Decorative Bar Pull

Select This Skyline Pull For Matching Cabinet Runs

The Skyline decorative bar pull, model 1121-1SLT-P from Berenson Corporation, brings a 3 inch and 3-3/4 inch center to center layout into one handle, giving flexibility across cabinet runs. The 4-13/16 inch length, 1-1/16 inch projection, and 5/8 inch width together define how the pull looks and feels on doors and drawers. With zinc construction in a slate finish and a specified 8-32 x 1 inch screw size, this handle and pull choice fits cabinet projects that call for a consistent Skyline collection style. Use this bar pull when those verified dimensions, finish, and material match the planned cabinet hardware details.