Berenson Skyline Series 6-5/16" (160 mm) Center to Center Modern Brushed Gold Pull, - 9977-1MDB-P

Berenson Skyline Brushed Gold Pull For Cabinets

Berenson Skyline brushed gold pull is a zinc cabinet pull designed for the Skyline 1 collection, so it brings a consistent look to doors and drawers in the same series. The modern brushed gold finish provides a muted metallic tone that suits contemporary cabinet fronts where a warm accent is needed without high shine. A center to center measurement of 6-5/16 inches, or 160 mm, sets the handle hole spacing, which matters when laying out drilling or matching existing bores. The overall length of 6-11/16 inches defines the visible handle span, giving proportion across wider drawer fronts. A projection of 1-1/16 inches sets the hand clearance off the face of the cabinet, which affects grip comfort when pulling loaded drawers. The 5/8 inch width establishes the front profile, so installers can align the pull visually with rail widths and stile sizes.

Skyline 160mm Pull Details That Support Work

• The Skyline 1 collection designation ties this pull to a defined product family, which helps maintain a uniform design language across multiple cabinets on the same project.
• Zinc material construction gives a solid metal pull body, which provides a firm feel under hand during daily door and drawer use.
• The modern brushed gold finish gives a contemporary, non-mirrored surface that can coordinate with other brushed gold components in the same room.
• A 6-5/16 inch, or 160 mm, center to center dimension matches common drilling patterns, which simplifies layout when aligning multiple pulls in a straight run.
• The 6-11/16 inch length determines overall handle coverage on the front, which helps visually balance wider fronts or align with neighboring hardware lines.
• A 1-1/16 inch projection gives stand-off from the face, which supports full finger clearance while keeping the pull close enough for tight corridor or galley layouts.
• The 5/8 inch width defines the front face band, which lets installers line up the pull scale with narrow frames or slab cabinetry for a consistent look.
• The specified 8-32 x 1 inch screw size sets the thread and length, which guides drilling and threading expectations when fitting the pull to standard cabinet fronts.

Installation Dimensions For Skyline 160mm Pull

A center to center distance of 6-5/16 inches on this Skyline pull defines the exact mounting hole spacing, which is critical when marking and drilling fronts or reusing existing holes. The 6-11/16 inch overall length shows how far the pull extends across the face, which helps position it so ends do not overrun narrow drawer rails. With a projection of 1-1/16 inches, the handle stands off the surface enough to get fingers behind, reducing strain when opening heavier drawers. A 5/8 inch width gives a slim profile, which is helpful on smaller doors where oversized pulls could crowd the panel. The 8-32 x 1 inch screw size tells installers the thread that the pull is tapped for, which matters when matching to cabinet door thickness and choosing bit sizing for clean, accurate bores.

Using Skyline 160mm Pulls In Cabinet Projects

Where This Skyline 160mm Cabinet Pull Fits

The cabinet pull length of 6-11/16 inches places this Skyline 160mm center to center pull in a size range suited to many base cabinet doors and medium-width drawers. The 160 mm, or 6-5/16 inch, center to center spacing gives a metric and imperial reference, which works in shops that switch between systems. The modern brushed gold finish supports projects that call for a warm metallic accent rather than a polished surface, which can pair well with wood grains and matte painted fronts. Being part of the Skyline 1 collection ties this pull into a defined style group, which is useful when outfitting an entire run of cabinets with matching hardware. The zinc material allows the pull to serve as a solid metal gripping point on frequently used storage, so doors and drawers can be opened with a confident handhold.

Details That Help Repeatable Pull Installation

The 6-5/16 inch center to center dimension on the Berenson 9977-1MDB-P cabinet pull supports consistent drilling because installers can set jigs or templates to a fixed spacing and repeat that across multiple fronts. A 1-1/16 inch projection keeps the gripping area at a predictable distance from the face, which helps maintain the same hand clearance whether the pull is mounted horizontally on drawers or vertically on doors. The 5/8 inch width creates a narrow contact band on the face, allowing precise alignment with cabinet edges, rails, or reveal lines. The specified 8-32 x 1 inch screw size means the pull is threaded for a standard machine screw commonly used in cabinet work, which lets installers rely on familiar tooling and torques. The 6-11/16 inch overall length makes it easier to visually center the pull on typical cabinet fronts, aiding in quick layout checks across a bank of doors.

Common Questions About Skyline Brushed Gold Pull

Selecting This Skyline Pull For Your Project

The Berenson Skyline brushed gold pull combines a 6-5/16 inch center to center spacing with a 6-11/16 inch overall length, so it lines up well on many cabinet fronts. Its 1-1/16 inch projection and 5/8 inch width set predictable handling and visual proportions. The Skyline 1 collection identity, zinc material, and modern brushed gold finish work together when a project calls for coordinated pulls across doors and drawers. For cabinet work that needs a defined 160 mm mounting layout in a modern brushed gold look, this Skyline pull offers clear, job-ready dimensions.