Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Steel Series 7-9/16 pull is a steel cabinet handle designed for decorative use on doors and drawers where a longer grip is needed. The pull is part of the Advantage Plus 7 collection, so it matches other pieces in that series for consistent hardware across a project. Its brushed nickel finish gives a satin look that pairs with many cabinet colors, helping jobs stay visually coordinated without extra selection work. The pull body is steel, providing a solid feel when operating heavier doors or wider drawers. With a 9-15/16 inch overall length, it spans more of the front, giving users a full four-finger grip. That length helps on tall pantry doors or large drawer fronts where a small knob would feel undersized. Branded by Berenson Corporation, the pull fits into decorative hardware and moldings projects where a defined style line is specified.
The 7-9/16 inch center to center measurement gives a clear drilling pattern for installers setting up doors and drawers. Using this fixed spacing keeps all pulls aligned, especially on banks of drawers where consistent layout is visible from a distance. The 192 mm metric callout supports layouts done from metric shop drawings. With a 1-1/4 inch projection, the pull stands off the surface enough for a comfortable grip, so hands clear the door edge when pulling. The 15/32 inch width means the mounting footprint stays narrow, which suits face frames and narrow rail sections. The manufacturer part number 9561-2BPN-P identifies this exact brushed nickel version in the Advantage Plus 7 line, helping shops repeat the same model on future phases or service work.
This pull belongs to the Advantage Plus 7 collection, so it fits projects that call for that specific series across a kitchen, bath, or office run. As a steel handle, it suits cabinet doors and drawers where a firm, full-hand pull is preferred over a small knob. The 7-9/16 inch (192 mm) center to center spacing places this piece in the longer pull category, making it appropriate for base cabinets, tall storage units, and larger drawers that benefit from a wider grip area. Its 9-15/16 inch overall length visually anchors wide fronts, giving proportion between hardware and panel size. The brushed nickel finish works in decorative hardware and moldings applications that specify satin metallic tones. Because the pull is categorized under handles and pulls, it fits into hardware schedules that group similar Berenson products together.
The steel construction gives this Berenson pull a solid feel during repeated opening and closing of cabinet doors and drawers, which is important in higher-traffic areas like kitchens, break rooms, or shop storage. The 1-1/4 inch projection creates a defined gap behind the pull, so fingers can wrap comfortably without rubbing hard against the cabinet face, supporting smoother operation over time. With a 15/32 inch width, the handle keeps a lean front profile, which ties in well with contemporary cabinet designs while still leaving enough surface for a confident grip. The brushed nickel finish provides a controlled sheen, so hardware reflections stay subdued under task lighting or daylight, helping the pull blend with other satin nickel components in the space. The specific Berenson 9561-2BPN-P designation lets designers, shops, and installers call out the exact pull when re-ordering or matching existing installations.
This Berenson steel pull has a 7-9/16 inch, or 192 mm, center to center dimension, which defines the distance between mounting holes for drilling and layout work.
The Berenson 9561-2BPN-P pull has a total length of 9-15/16 inches, so it spans a wider section of the cabinet front for a larger gripping area.
The Advantage Plus 7 pull is made of steel, providing a sturdy handle for frequent cabinet door and drawer use in residential or commercial spaces.
This satin nickel pull has a projection of 1-1/4 inches, setting the stand-off distance from the cabinet face for finger clearance and comfortable gripping.
The Berenson satin nickel pull has a width of 15/32 inches, giving it a slim front profile that suits narrow rails and modern cabinet designs.
This Berenson steel cabinet handle has a brushed nickel finish, creating a satin appearance that coordinates with other brushed nickel decorative hardware.
The Berenson Steel Series 7-9/16 pull in brushed nickel pairs a 192 mm center to center layout with a 9-15/16 inch overall length, giving projects a longer, steel handle that matches the Advantage Plus 7 collection. The 1-1/4 inch projection and 15/32 inch width balance grip comfort with a slim profile, supporting consistent lines on doors and drawers. For jobs calling for Berenson decorative hardware and moldings with a satin nickel look, this 9561-2BPN-P handle offers a repeatable option that aligns with specified dimensions and finish.
Sold In: 1 Each
