Fastmount male heavy duty surface mount clip provides a standard profile fastening point for panel assembly fittings, so wall or ceiling panels can be secured using the Fastmount panel mounting systems range where a surface-mounted male clip is preferred. The clip belongs to the panel assembly fittings class, so it is intended as a structural connection element between a panel and its mating Fastmount female fittings in cabinetry or interior panel work. The adhesive fix super-groove base forms the foundation of the clip, so an adhesive bond can be used instead of penetrating fasteners in situations where drilling into the substrate or panel face is undesirable. This configuration lets installers position panels accurately over compatible Fastmount sockets while relying on a repeatable mechanical connection.
This Fastmount heavy duty surface mount clip is defined as a surface mount type, so it is intended to sit on the face of the panel or substrate rather than being recessed, which suits retrofit work where cavities are not pre-machined. The standard profile series designation indicates the clip occupies the regular height used in that Fastmount family, so its assembled stand-off will match other standard profile Fastmount panel mounting systems in the installation. The adhesive fix super-groove base allows the installer to bond the PC-SM2H to the chosen surface with a suitable adhesive, which is useful in applications where backside access for through-fix mechanical fasteners is constrained or where a clean visible face is desired. Once bonded, the clip forms the male component that mates to the listed Fastmount female fittings, setting the panel position relative to the supporting structure.
The PC-SM2H Fastmount panel clip is part of the Fasteners and Panel Mounting Systems category, so it is tailored for situations where panels need to be mounted in a controlled, repeatable position rather than fixed permanently. Because this male heavy duty surface mount clip fits into SLPC-F1, SLPC-SF1, SLPC-RF1-B, and SLPC-AF1 fittings, it is well suited to projects already standardized on those female Fastmount components, such as interior paneling that must align with pre-positioned sockets. The standard profile series classification means the clip will present a known engagement height to the matching fittings, which helps maintain even panel reveals and consistent stand-off across multiple panels in the same run. In a panel assembly fittings role, this arrangement supports panel systems that may be removed and refitted while preserving the original alignment provided by the Fastmount system components.
The adhesive fix super-groove base on this Fastmount male heavy duty surface mount clip adds grooves to the bonding surface, giving adhesive more mechanical key and helping stabilize the clip once the bond is formed under normal panel mounting conditions. By specifying a pull out force of 22 lbs, Fastmount defines a performance reference for the connection, which allows installers to relate the clip choice to anticipated panel handling loads and the forces applied when panels are disengaged from their matching sockets. Its compatibility with several Fastmount fittings under the SLPC code group reduces the number of different male clips needed across an installation, which simplifies layout planning because one PC-SM2H part number can serve multiple panel locations using those sockets. The standard profile nature of the PC-SM2H helps produce predictable engagement depth into the SLPC female fittings, contributing to more consistent panel planes and less fine-tuning of support structures across connected panels.
The PC-SM2H is a Fastmount male heavy duty surface mount clip in the standard profile series, used as a panel assembly fitting within the Fastmount panel mounting systems range.
The adhesive fix super-groove base provides a grooved bonding surface, so adhesive can key into the base and help stabilize the clip when mounting panels onto compatible Fastmount fittings.
The PC-SM2H male heavy duty surface mount clip fits into Fastmount fittings SLPC-F1, SLPC-SF1, SLPC-RF1-B, and SLPC-AF1, enabling it to function as the male component across those socket types.
The 22 lb pull out force indicates the tension load the Fastmount connection is designed to resist, helping relate the PC-SM2H clip to panel sizes and handling forces in typical panel applications.
This Fastmount male heavy duty surface mount clip uses an adhesive fix super-groove base, so it is mounted by bonding the grooved base to the chosen panel or supporting surface.
The standard profile series designation means the PC-SM2H clip aligns with the regular Fastmount engagement height, supporting consistent panel stand-off and alignment when used with matching fittings.
The PC-SM2H Fastmount panel mounting clip pairs a male heavy duty surface mount design with an adhesive fix super-groove base, so it suits panel work relying on adhesive-bonded clips rather than recessed hardware. Its fit into SLPC-F1, SLPC-SF1, SLPC-RF1-B, and SLPC-AF1 lets one clip type serve multiple socket locations built around those Fastmount fittings. With a 22 lb pull out force rating and standard profile series geometry, this Fastmount male heavy duty surface mount clip offers a defined performance and engagement height for panel assembly fittings within the Fastmount panel mounting systems family.