Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Fastmount male variable gap self tapping clip is a standard profile panel assembly fitting that mounts into a 3/8 inch hole, so installers get a defined drilling size when laying out panel fixing points. This Fastmount clip is part of a panel mounting system, giving woodworkers and fit-out crews a repeatable way to fasten panels where removal and re-fit may be needed. The PC-VM1 male clip fits into SLPC-F1, SLPC-SF1, SLPC-RF1-B, and SLPC-AF1, so the mating component choice can follow the site substrate or framing details. A minimum panel thickness of 11/32 inch means the product is aimed at properly dimensioned panels, helping maintain holding strength in use. The 11 lbs pull out force provides a clear reference for how firmly panels are retained in normal service, which supports planning for panel size, spacing, and quantity of clips per panel.
The PC-VM1 Fastmount male variable gap self tapping clip is installed into a 3/8 inch hole, so drilling can be set up with standard bits and jigs for consistent spacing across multiple panels. The self tapping feature engages directly in the drilled hole, which creates the mating point for the female clip types SLPC-F1, SLPC-SF1, SLPC-RF1-B, and SLPC-AF1. Using the SLCT-10 install tool provides a dedicated method for driving or positioning the clip, helping achieve consistent seating depth from one location to the next. With a minimum panel thickness of 11/32 inch, installers can base material and edge-distance decisions on that value so the clip remains well supported in the panel core during handling and operation.
The Fastmount PC-VM1 male variable gap self tapping clip functions as a standard profile panel assembly fitting within a panel mounting system, so it suits projects where panels need a defined and repeatable fixing point. Because it mounts into a 3/8 inch hole, it aligns well with cabinetmaking and interior fit-out work that already uses imperial drilling patterns. The clip fits into SLPC-F1, SLPC-SF1, SLPC-RF1-B, and SLPC-AF1, so it can be matched to different female components depending on the base structure, allowing the same panel layout to work across mixed substrates. The minimum panel thickness of 11/32 inch focuses its use on panels with enough material around the hole to support the clip in typical woodworking and interior applications.
The self tapping design of the PC-VM1 means the clip forms its engagement inside the 3/8 inch hole, which helps produce a consistent hold without separate thread preparation, useful on larger runs of similar panels. Using the SLCT-10 install tool as specified creates a controlled way to insert the clip, so seating and orientation can be kept uniform from clip to clip. The 11 lbs pull out force rating defines the resistance to direct withdrawal, giving installers a numeric value to use when calculating clip quantity and spacing relative to panel size and expected loads. As a standard profile series part within the Fastmount panel mounting system, the PC-VM1 gives shops a repeatable component that can be detailed in drawings and cut lists, making future panel removal and reinstallation follow the same connection geometry.
The Fastmount PC-VM1 is a male variable gap self tapping clip in the standard profile series, used as a panel assembly fitting within a panel mounting system for fastening panels.
The PC-VM1 mounts into a 3/8 inch hole, so drilling can follow that dimension when preparing panels for this Fastmount male clip.
The PC-VM1 male clip fits into Fastmount female clips SLPC-F1, SLPC-SF1, SLPC-RF1-B, and SLPC-AF1, forming the panel-to-substrate connection in the system.
The Fastmount PC-VM1 requires a minimum panel thickness of 11/32 inch, aligning it with panels that provide enough material around the mounting hole.
The PC-VM1 male clip has an 11 lbs pull out force rating, offering a defined resistance value for planning clip quantity and panel layout.
The Fastmount PC-VM1 uses the SLCT-10 install tool, giving installers a designated tool reference when setting up workflows for this clip.
The Fastmount PC-VM1 male variable gap self tapping clip gives installers a defined 3/8 inch mounting hole, specified female counterparts, and an 11 lbs pull out force, so panel layouts can be engineered with known values. With its minimum 11/32 inch panel thickness requirement and use of the SLCT-10 install tool, the clip fits neatly into professional shop processes where panel fastening needs to be repeatable across projects. For panel mounting work that benefits from a standard profile Fastmount component, the PC-VM1 offers a clearly defined role in the overall system.