Fastmount Very Low Profile Clip Set gives a 24.5mm x 24.5mm clip format that supports consistent panel mounting, so installers can match layout grids and repeat the same fixing positions across multiple panels. The clip belongs to the Fasteners and Panel Mounting Systems category as a Panel Assembly Fitting, which positions it as a dedicated component for attaching removable or serviceable panels in woodworking or interior projects. The very low profile design keeps the fixing depth compact, which helps where tight cavities or shallow framing limit the available space behind panels. Identified by manufacturer part VL-03H, the clip set provides clear traceability when matching specifications on drawings or reordering for future jobs. The heavy duty designation in the description signals that this clip is intended for more demanding panel retention than light-duty solutions, so it can be selected where a stronger hold is required.
The Web Description confirms this Fastmount Very Low Profile Clip Set can be surfaced or recessed mounted, which gives installers flexibility to adapt to different panel thicknesses and design details. Surface mounting keeps installation straightforward when there is adequate clearance, while recessed mounting allows the clip to sit deeper into the material when a flush finish or tighter tolerance is needed. Because the same VL-03H part supports both approaches, a single clip specification can cover varied mounting conditions on one project, reducing the number of different clip types that need to be planned into a job.
The Fastmount Very Low Profile Clip Set sits in Fasteners and Panel Mounting Systems as a Panel Assembly Fitting, so its role is fastening panels to supporting frames or substrates in woodworking and related applications. The 24.5mm x 24.5mm clip footprint suits panel layouts where a compact but defined mounting area is preferred, helping maintain consistent edge distances and alignment across a run of panels. Because the clip can be surfaced or recessed mounted according to the Web Description, it can be used on panels where back-side clearance is generous as well as on installations where a shallower build-up is required. This flexibility supports panel work across different zones of a project, such as areas with service cavities and areas against solid substrates, while keeping the same Fastmount VL-03H part number in the schedule.
The Web Description specifies a Pull Out Force of 22 lbs, so each Fastmount Very Low Profile Clip Set is designed to resist that level of straight-line pull, which helps panels stay seated under normal handling and use. For installers planning clip spacing, this defined pull-out figure provides a basis for deciding how many clips to use across a panel to achieve the desired overall retention level. The description also identifies the set as heavy duty, which aligns with the 22 lbs pull out force and signals that it is engineered for applications where panels need firmer engagement than light-duty panel clips. The ability to install the clip with screws or glued, as stated in the Web Description, adds another layer of flexibility: screws give a mechanical fixing into suitable substrates, while gluing provides an option where screw penetration into a surface is not desired. The Web Description also notes a Stainless Steel Screw, SLVL-SS3, which indicates that the matching screw material is stainless steel, supporting use in environments where corrosion resistance of the screw is valued for maintaining long-term panel attachment integrity.
The Fastmount VL-03H clip set is classified under Panel Assembly Fittings within Panel Mounting Systems, so it serves as a fastening point between panels and supporting structures.
The 24.5mm x 24.5mm clip size defines a consistent mounting footprint, which helps installers repeat drilling locations, spacing, and edge distances across multiple panels.
The Web Description states the clip set can be surfaced mounted, so it can be fixed directly onto panel or frame faces where there is enough clearance behind the panel.
The Web Description confirms the clip set can be recessed mounted, allowing the clip body to sit into the material where a lower build-up is required.
The 22 lbs pull out force indicates the clip set is designed to resist that level of straight pull, giving installers a defined holding value when planning clip quantity.
The Web Description states the clip can be installed with screws or glued, providing options for mechanical fastening or adhesive bonding depending on the substrate.
The Fastmount Very Low Profile Clip Set, manufacturer part VL-03H, combines a 24.5mm x 24.5mm format, heavy duty description, and 22 lbs pull out force to support demanding panel mounting tasks. Being usable in surfaced or recessed mounted configurations, and installable with screws or glued, it offers one clip specification that adapts to varied panel conditions. For panel mounting work that fits the Panel Assembly Fittings category, this Fastmount clip set from Wurth Baer Supply provides defined performance data that can be built into project plans and takeoffs.