Amerock Esquire Series 12-5/8 in (320 mm) Center to Center Satin Nickel/Oil Rubbed Bronze Pull, -BP36561G10ORB

Amerock Esquire Cabinet Pull 320mm For Cabinets

Amerock Esquire cabinet pull 320mm describes a 12-5/8 inch (320 mm) center-to-center pull designed for decorative cabinet hardware work. That center-to-center dimension positions the mounting holes for straightforward layout when drilling fronts or drawer faces. The pull is part of Amerock Corporation's Esquire collection, so it matches other Esquire components on a project for consistent visual alignment. Its role as a decorative handle within the Handles and Pulls category supports both opening function and finishing detail on casework.

The pull is finished in a Satin Nickel/Oil-Rubbed Bronze split finish, giving two distinct metallic tones on one part. That dual finish creates visual contrast across the knurled grip and smooth ends, which helps installers and designers tie mixed metal elements together in one run of cabinets. As Amerock decorative hardware, the pull is intended as a finishing touch that coordinates with other Amerock styles and finishes in a room.

Key Esquire 12-5/8 Inch Cabinet Pull Details

• The 12-5/8 inch (320 mm) center-to-center dimension sets the distance between mounting points, which simplifies layout when drilling through cabinet doors or drawers for consistent handle spacing across a bank.
• The Esquire collection pairs a knurled texture with smooth metallic ends, giving both tactile grip on the center section and a clean transition at the posts where the pull meets the cabinet surface.
• The Satin Nickel/Oil-Rubbed Bronze finish creates a modern industrial split-finish composition, so the pull can visually connect to both lighter nickel fixtures and darker bronze elements in the same installation.
• The high contrast Satin Nickel and Oil-Rubbed Bronze surface marries delicately brushed warm nickel accents with the rich burnished nature and copper highlights of Oil-Rubbed Bronze, adding depth when viewed along a full run of cabinetry.
• The pull belongs to Amerock's decorative cabinet hardware offering, allowing it to coordinate with other Amerock cabinet hardware, bath accessories, decorative hooks, and wall plates in a unified project.

Center-To-Center Pull Sizing For Layout

The stated 12-5/8 inch (320 mm) center-to-center size identifies the measurement between the two mounting hole centers on this pull. That dimension drives drilling jigs, layout marks, and template settings, which is important when repeating the same pull across multiple doors and drawers. Because the Esquire pull is classified under Handles and Pulls with a 320 mm center-to-center, it suits projects planned around this longer European-style spacing. The overall length of the pull aligns proportionally to that center distance, helping the handle look balanced on wider drawer fronts or taller doors where a short pull might appear undersized.

Using The Amerock Esquire Pull On Projects

Where This Amerock Esquire Pull Fits Best

The Amerock BP36561G10ORB Esquire pull belongs in decorative cabinet hardware and moldings work, where the handle acts as both a grip point and a visual element. Its modern industrial, split-finish composition supports cabinet lines that mix contemporary forms with metal details. The knurled texture at the center grip offers visual interest that suits kitchens, baths, and built-ins designed around industrial or loft-inspired themes. Because the pull is part of the Esquire collection, it can be used wherever a coordinated family of pulls is desired, from base cabinets to tall pantry doors, keeping the same design language throughout the project.

The Satin Nickel/Oil-Rubbed Bronze split finish lets the same pull sit comfortably next to Satin Nickel fixtures and darker Oil-Rubbed Bronze elements in one room. This helps when a project uses mixed metal faucets, lighting, or hinges, allowing the pull to bridge those finishes along the cabinet fronts. The longer 320 mm center-to-center span visually suits larger drawer widths and taller doors, giving a proportion that feels substantial on wide faces. In these applications, the handle length provides a generous grasp area, which can be helpful on heavier drawers or full-height doors where users naturally reach with both hands.

Why Esquire Details Support Repeatable Results

The clearly defined 320 mm center-to-center measurement helps installers and shop teams standardize drilling patterns across multiple cabinets. By working from that single dimension, jigs can be set once and used repeatedly, reducing layout variation between doors and drawers. The Esquire collection's pairing of knurled texture with smooth metallic ends creates an intentional junction between grip area and mounting posts, so the transition from handle to cabinet looks deliberate along an entire run.

The modern industrial, split-finish composition of Satin Nickel and Oil-Rubbed Bronze gives the pull a balanced two-tone look, which simplifies finish coordination decisions at design time. An alluring split finish with high contrast Satin Nickel and Oil-Rubbed Bronze marries the delicately brushed, subtle warm accents of Satin Nickel with the rich, burnished nature and copper highlights of Oil-Rubbed Bronze, helping the pull read well under different lighting conditions on site. As part of Amerock's decorative cabinet hardware and home solutions, the pull is intended to act as a final design element that ties cabinet faces to the broader room scheme.

Common Questions About This Esquire Cabinet Pull

Choose This Pull For 320mm Cabinet Layouts

The Amerock Esquire cabinet pull 320mm offers a defined 12-5/8 inch center-to-center size, a modern industrial Esquire profile, and a Satin Nickel/Oil-Rubbed Bronze split finish that coordinates mixed metals on cabinet faces. For projects laid out around 320 mm center-to-center spacing, this Amerock Esquire Series 12-5/8 inch pull provides both functional grip and a consistent design language from doors to drawers, ready to be used wherever a matching Amerock decorative pull is required.