Ashby Cup Pull For Cabinet Drawer Updates

Ashby cup pull from Amerock Corporation is a zinc cabinet handle designed as a classic cup pull with updated styling. The Ashby Collection design supports both 3 inch and 4 inch installations, so one part handles common retrofit layouts on existing cabinet doors and drawers. The pull uses a weathered nickel finish, giving cabinets a muted metal look that blends easily with many door styles. The handle has a length of 5-1/16 inches and a base length of 5-1/16 inches, so the footprint fully covers the mounting area stated in the dimensions. A projection of 1-3/8 inches creates hand clearance when grabbing the pull from the front of the cabinet. The 1-3/4 inch width and matching base width give the pull a deep cup profile that helps fingers grip the interior edge during daily use.

Key Ashby Cup Pull Details For Projects

• The pull supports both 3 inch and 4 inch center-to-center mounting, so a single model fits two common hole spacings when working on mixed existing cabinet layouts.
• The Ashby Collection design is described as a high end design with a classic cup pull form, giving projects a traditional look with updated styling for visible cabinet fronts.
• The weathered nickel finish defines the surface appearance, so installers can match this pull to other weathered nickel decorative hardware in the same room.
• The zinc material forms the body of the pull, providing a solid metal construction that suits typical woodworking and cabinet hardware applications.
• The handle length of 5-1/16 inches and width of 1-3/4 inches set the visible footprint, helping plan rail space on cabinet faces before drilling or reusing holes.
• The center-to-center options of 4 inches and 3 inches match the stated hole spacings of 102 mm and 76 mm, supporting standard metric layout drawings and jigs.

Installation Geometry And Mounting Dimensions

The Ashby cup pull uses center-to-center dimensions of 4 inches and 3 inches, so it aligns with existing 102 mm or 76 mm mounting holes on many cabinets. The projection of 1-3/8 inches defines how far the pull stands off the door or drawer, affecting reach when grabbing from the front. A width of 1-3/4 inches and base width of 1-3/4 inches describe the vertical size on the face, which matters when positioning near rails or panel edges. The length and base length of 5-1/16 inches describe the horizontal span, helping installers check that the pull fits fully on the stile or drawer front without overhanging. The screw size is #8-32 by 1 inch, which sets the threaded connection standard used for fastening the pull through typical cabinet panel thicknesses.

Using The Ashby Cup Pull On Cabinets

Where This Ashby Cup Pull Works Best

The Ashby cup pull from the Ashby Collection is a decorative handle in the Handles and Pulls category, so it is suited to cabinet doors and drawers where a cup pull style is desired. The center-to-center options of 3 inches and 4 inches match many existing layouts in residential and commercial cabinetry, which helps when replacing older handles without changing the drilling pattern. The weathered nickel finish gives the pull a distinct metal tone, letting installers coordinate it with other weathered nickel decorative hardware and moldings on the same job. The 5-1/16 inch length provides a substantial span across the drawer front, which is useful on medium-width drawers that benefit from a wider hand grip area. The 1-3/4 inch width and cup shape provide finger access from below the rim, fitting everyday drawer opening motions in kitchens, baths, and workrooms.

Details That Support Consistent Cup Pull Results

The Amerock Corporation manufacturer part number BP36640WN identifies this specific Ashby cup pull, so shops can repeat the same handle across multiple projects or phases. With a projection of 1-3/8 inches, the distance between the mounting surface and the front edge of the pull is fixed, giving installers predictable hand clearance when aligning multiple pulls in a row. The base length and base width matching the overall length and width mean the full footprint is defined by 5-1/16 inches by 1-3/4 inches, which simplifies layout when lining up the pull relative to panel edges or decorative moldings. The use of zinc as the material provides a metal body that works with common cabinet hardware tools and bits when handling, test-fitting, or adjusting. Center-to-center dimensions of 4 inches and 3 inches cover both 102 mm and 76 mm patterns, helping maintain consistent spacing across doors and drawers that might use either standard.

Common Questions About Ashby Cup Pull Fit

Selecting This Ashby Cup Pull For Projects

The Ashby cup pull in weathered nickel from Amerock Corporation combines a classic cup shape with 3 inch and 4 inch center-to-center options, so one part serves two common retrofit patterns. With defined dimensions for length, width, projection, and screw size, the pull offers predictable geometry when planning layouts across multiple cabinet fronts. For projects calling for an Ashby Collection handle in weathered nickel with these specific measurements, this BP36640WN model from Wurth Baer Supply matches the stated decorative hardware and molding requirements.