
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Wells gunmetal knob delivers a 1-1/2 inch length and 1-1/2 inch width, giving cabinet doors and drawers a balanced, square grip area that feels consistent from project to project. The Wells collection design uses a silhouette that echoes a gemstone cut, so the knob adds defined edges that visually line up well with modern cabinet faces. When this knob is mounted at 45 degrees, it forms a diamond shape that changes the visual orientation without changing the footprint, which helps keep layout measurements straightforward during installation. The zinc die-cast material provides a solid-feeling body that supports repeated daily use in busy spaces. A projection of 1-3/8 inch from the mounting surface sets the hand clearance and pull distance, which matters when aligning knobs across doors, drawers, and adjacent hardware.
The Amerock Wells gunmetal knob uses an 8-32 x 1 inch screw size, so the threaded interface is standardized for cabinet hardware installations that follow this common pattern. With a 1-1/2 inch by 1-1/2 inch face, the knob centers easily on typical drawer fronts and door rails using equal offsets from both edges, which simplifies layout work when repeating the install across multiple fronts. The 3/4 inch by 3/4 inch base sits firmly against the door or drawer surface, creating a defined bearing area that helps the knob sit square once tightened. A projection of 1-3/8 inch from the mounting surface sets the working clearance between hand and cabinet face, which can influence how closely doors can open near walls, appliances, or adjacent cabinetry.
The Wells collection design gives this Amerock BP36547GM knob a squared 1-1/2 inch by 1-1/2 inch profile, making it suitable for both doors and drawers where consistent geometry is preferred across the run. Mounted at 45 degrees, the same knob presents as a diamond shape, which lets the installer vary the look on selected fronts while keeping to the same hardware family. The zinc die-cast construction supports use in cabinet applications that see frequent opening and closing, such as kitchen, bath, or storage cabinetry. With a base measuring 3/4 inch by 3/4 inch, the knob contacts a compact area on the face, which is useful on narrower rails or smaller drawer fronts where larger bases might crowd neighboring details.
The 1-1/2 inch length and width give a clear reference when laying out centerlines, because the knob remains symmetric whether installed square or rotated to a diamond orientation, reducing layout variation across a job. The 1-3/8 inch projection defines how far the hand pulls away from the cabinet surface, which contributes to consistent feel across doors and drawers installed in the same line. The 8-32 x 1 inch screw size specification ties the knob to a known thread standard, allowing holes to be drilled to suit that fastener pattern across multiple cabinet fronts. The 3/4 inch by 3/4 inch base helps the knob register firmly against flat door and drawer faces, which supports precise alignment when tightening rows of hardware to straight visual lines.
The Amerock Wells gunmetal knob has a 1-1/2 inch (38 mm) length and 1-1/2 inch (38 mm) width, providing a square face that simplifies centering on cabinet doors and drawers.
The Amerock BP36547GM knob projects 1-3/8 inch (35 mm) from the mounting surface, setting hand clearance and helping coordinate depth with other cabinet hardware pieces.
The Wells collection gunmetal knob is zinc die-cast, giving it a solid metal body suited to repeated door and drawer use in typical cabinet installations.
This Amerock Wells knob uses an 8-32 x 1 inch screw size, so the threaded connection follows a common cabinet hardware standard for drilling and tapping.
The Wells collection knob can be mounted at 45 degrees, creating a diamond shape that changes the visual presentation without changing the mounting center.
The Amerock Wells BP36547GM knob has a base length of 3/4 inch (19 mm) and base width of 3/4 inch (19 mm), defining the contact area against the cabinet front.
The Amerock Wells gunmetal knob BP36547GM pairs a 1-1/2 inch square face with a 1-3/8 inch projection, giving a consistent grasp point across doors and drawers. With its zinc die-cast construction, gunmetal finish, and 8-32 x 1 inch screw specification, this knob aligns well with cabinet hardware standards used by professional installers and serious DIY users. Choose this Wells collection piece when a square or diamond-oriented pull suits the layout and when matching gunmetal decorative hardware is part of the overall cabinet plan.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AMBP36546-GM Mfr# BP36546GM | Wells, Zinc Die-Cast Cabinet Knobs 1-1/4" (32 mm) Square, Gunmetal Finish |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AMTMP-MULTI Mfr# TMPMULTI | Door/Drawer Hardware Installation Template |