Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand standard front locking device for Blum's MOVENTO undermount drawer slide system, with integrated side adjustment that lets you fine-tune the drawer front's lateral position after installation.
On a MOVENTO drawer, the front locking device is the mechanical link between the drawer box and the slide. Once the box is set on the runners, the locking device clips under the drawer front and locks it in place. Without the correct handed pair, the drawer front cannot seat properly on the slides. This left-hand unit clips on the left side as you face the open drawer; the right-hand device handles the opposite side. Together they hold the front square, allow the side adjustment to be dialed in, and give you a tool-free release when the drawer needs to come out for cleaning or a front swap.
The MOVENTO series uses its own locking devices, front fixings, and adjustment components — none of which interchange with TANDEM slides, LEGRABOX runners, or other Blum platforms. Confirm your slides are MOVENTO before ordering. For a complete front fixing, you need one left-hand and one right-hand locking device per drawer. If your project calls for height or depth adjustment in addition to side adjustment, check whether a multi-axis locking device is the better fit for that application.
Cabinet shops running MOVENTO slides on kitchen, bath, or furniture drawers will reach for this part whenever a drawer front needs a small lateral correction after install — pulling a door into line with its neighbors without touching the box or the slide. It is also the go-to replacement locking device when a clip is lost or damaged on an existing MOVENTO installation. Designers specifying handle-less fronts or inset applications where precise side-to-side alignment is critical will find the +/- 1.5 mm of built-in adjustment particularly useful.
No. Locking devices are engineered per Blum series. This device is built for MOVENTO undermount slides only and will not seat correctly on TANDEM or TANDEMBOX runners.
Left-hand refers to the left side of the drawer as you face the open cabinet. This device mounts under the left side of the drawer front; pair it with the right-hand locking device on the opposite side.
The built-in side adjustment range is +/- 1.5 mm — enough for routine front alignment after the drawer is hung, but not a substitute for accurate box sizing or slide installation.
You need two per drawer — one left-hand and one right-hand. This listing is for the left-hand device only; order the right-hand counterpart separately to complete the front fixing.
This standard locking device provides side adjustment only. If you need height or depth correction as part of the front fixing, look at MOVENTO locking devices with additional adjustment axes.
The right part on the right side means no shimming, no rehanging, and no gaps — just a drawer front that lines up the first time and releases cleanly when it needs to come out.
Sold In: 1 Each
