24 inch one handed EZS clamp from Bessey Tools is a clamp in the woodworking hand tools category that delivers single-handed clamping and spreading of workpieces, so one hand can control parts or alignment while the other hand sets and tightens the clamp. The Bessey Tools design offers clean design lines and comfortable handles, which supports longer clamping sessions when many pieces need to be held. This EZS60-8 model provides up to 445 lb clamping force, which secures joints and parts firmly during gluing or assembly. The clamp transitions smoothly from clamping to spreading, so one tool can pull pieces together or push components apart as needed on the same project. The handle is positioned behind the rail to create a powerful grip during tightening. Soft pressure caps contact the workpiece, protecting surfaces while maintaining secure clamping.
This Bessey one handed clamp uses single-handed clamping and spreading of workpieces, so the operator can hold a panel, rail, or stile with one hand while tightening the clamp with the other for accurate positioning. The upper section quickly converts from clamping to spreading without tools through an intelligent release mechanism, allowing the same EZS60-8 clamp to push parts apart or pull them together without changing equipment. The ergonomic handle positioned behind the rail places the hand behind the clamping bar, creating a strong pulling motion along the rail that supports reaching the available 445 lb clamping force. Soft pressure caps sit at the contact points and help distribute pressure, which maintains grip on the workpiece while protecting the surface during the clamping cycle.
The EZS60-8 one handed clamp from Bessey Tools is part of the clamps product class within woodworking tools and equipment, aligning it with cabinet, furniture, and general woodworking tasks where controlled pressure is important. Its single-handed clamping and spreading of workpieces assists when an installer or woodworker is aligning parts that cannot be easily held with multiple clamps at once. The 24 inch one handed EZS clamp length supports holding longer parts, rails, or panels while edges and joints are brought into alignment. With up to 445 lb clamping force, the clamp can hold glued joints or assemblies firmly while adhesives set. The ergonomic handle behind the rail allows force to be applied close to the bar, which supports strong, repeatable tightening on piece after piece throughout a job. Soft pressure caps help protect finished or prepared surfaces during these operations.
The intelligent release mechanism that converts the upper section from clamping to spreading without tools means the EZS60-8 moves between pulling joints tight and spreading components apart without downtime for reconfiguration, which keeps workflow moving. Single-handed operation lets the user guide doors, frames, or panels into position while adjusting clamp pressure with the same tool, contributing to consistent alignment from part to part. Throat depth to the very edge delivers power across the entire pad rather than just at pad center, so clamping pressure reaches closer to edges and corners where fit is often most critical. Soft pressure caps optimize material protection and secure clamping at the same time, which supports using this clamp on both raw and prepared stock during different build stages. The ergonomic handle design and its location behind the rail support a comfortable, strong grip, helping operators repeat the same clamping force over many cycles without changing tools.
The 24 inch one handed EZS clamp from Bessey Tools is a woodworking clamp in the hand tools category, suited to holding and positioning workpieces during assembly or gluing.
Single-handed clamping and spreading of workpieces lets one hand position or align parts while the other operates the clamp, which is useful when handling larger panels or frames.
The up to 445 lb clamping force allows the EZS60-8 to hold joints and assemblies firmly, supporting stable glue-ups and secure positioning while parts are fixed or adjusted.
The intelligent release mechanism lets the upper section quickly convert from clamping to spreading without tools, so users can change tasks without stopping to reconfigure the clamp.
The handle behind the rail creates an ergonomic pulling motion along the bar, helping users apply strong, controlled pressure while reaching the clamp's available force.
Throat depth to the very edge extends clamping power across the full pad, so pressure reaches closer to workpiece edges and corners where accurate fit is important.
The EZS60-8 24 inch one handed EZS clamp from Bessey Tools combines single-handed clamping and spreading of workpieces with up to 445 lb clamping force, so parts stay controlled during gluing and assembly. Its intelligent release mechanism converts the upper section between clamping and spreading without tools, allowing one clamp to handle multiple tasks on the same project. With an ergonomic handle positioned behind the rail and soft pressure caps that protect while gripping, this clamp supports accurate, repeatable workholding across woodworking jobs. Add this clamp to the setup when dependable pressure and one hand operation are needed.
Sold In: 1 Each