Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Würth #6 x 1/2" Flat Head Hinge and Drawer Slide Installation Screw is a short-length hardware mounting screw built for attaching European cup hinges, drawer slides, and related cabinet hardware to standard cabinet panels. The Antique English finish coordinates with dark-toned decorative hardware throughout the cabinet interior.
At 1/2", this screw is sized for the thinner-panel situations that longer hardware screws can overshoot. Mounting plates on compact European hinges and drawer slide clips often sit against 1/2" or 5/8" cabinet sides, secondary panels, and overlay filler strips where a 3/4" or longer screw would risk breaking through the back face. The short shank threads fully into the panel material without puncturing the finished or laminated surface on the other side, keeping the installation clean on face-frame and frameless boxes alike.
The Antique English finish gives the screw head a dark, muted tone that recedes against the darker hardware used in traditional, transitional, and oil-rubbed-bronze cabinet designs. A flat head seats against the bearing surface of hinge plates and slide mounting flanges so the hardware lies flat against the panel. The #6 gauge matches the pre-bored hole diameter found in most European hinge and drawer slide mounting plates, and the coarse thread engages the fiber structure of plywood, particleboard, and MDF effectively at this short length.
Cabinet shops building traditional or transitional kitchen and bath lines with dark hardware packages will use this screw anywhere the mounting plate calls for a short fastener and the finish needs to stay consistent. Installers doing finish work on pre-built boxes benefit from having a finish-matched short screw on hand when compact hinge plates or drawer slide clips land on thinner secondary panels. The 1,000-piece box suits shops running production quantities of cabinets with matched Antique English hardware across an entire job.
When the mounting plate lands on a 1/2" panel, a filler strip, or a thin overlay, a longer screw can break through the back face. The 1/2" length threads fully into thin stock and stays well clear of the opposite surface.
Yes. The #6 gauge and flat head are sized to fit the pre-bored mounting holes found in most European hinge base plates and drawer slide clips.
The coarse thread is well suited to plywood, particleboard, and MDF, which are the panel materials most commonly used in cabinet box construction.
Antique English is a dark, muted finish that pairs with oil-rubbed bronze, dark bronze, and similar dark-toned cabinet hardware. Use it wherever visible screw heads need to blend into the hardware rather than contrast with it.
In most cases, no. The sharp point self-starts in the pre-bored holes of hinge and slide mounting plates and drives directly into the panel behind them.
When the job calls for a dark finish, a flush-seating head, and a length short enough to protect thin panels, this Würth #6 x 1/2" Antique English screw keeps the installation clean and the hardware looking intentional from the first box to the last.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Each |  WW614176461 Mfr# 0614176461005 10 | #2 x 1" Phillips Drive Insert Bit (10/Bag) |