Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding 8800 Summer Elm 3mm gives you a dedicated edge banding solution sized at 3mm thick by 15/16 inch wide, so you can cover common panel edges with a single pass that matches your panel build-up. This edge banding is identified as product class Edge Banding, which means it is purpose-made to finish raw sheet-good edges for a more finished, job-ready appearance on cabinets and casework. The material is ABS, so the edge banding is based on a thermoplastic surface that stays consistent along the 328 foot roll length for repeatable results from part to part. The Summer Elm color is identified as Arborite W-459 good, giving you a reference tone for coordinating with that surface pattern on doors, drawer fronts, and panels where you want a related edge appearance.
The stated 3mm thickness sets this edgeband up for applications where a thicker, more substantial edge is desired, such as cabinet doors or higher-traffic edges, because that build gives more material to trim and finish. The 15/16 inch width is sized to cover common panel thicknesses while leaving enough overhang on both sides for trimming, so you can run standard edge-banding and flush-trim steps without starving the edge. ABS as the base material aligns this product with ABS-focused edgebanding equipment settings, so feed speeds and trimming setups can be tuned around a consistent thermoplastic behavior.
The Edgebanding 8800 Summer Elm 3mm from Doellken Woodtape is defined as edge banding in a polyester category, so it slots into edgebanding and surfacing workflows in cabinet and woodworking shops. The Summer Elm reference that is identified as Arborite W-459 good gives you a color point for projects built around that decorative surface, so the edges can follow the same visual family on casework runs. With a 328 foot roll length, this edgeband supports multi-piece production such as a full kitchen or bank of office cabinets without frequent material changeovers, keeping color continuity across doors, drawer fronts, and panels. The 3mm thickness works well wherever a pronounced edge detail is desired, supporting heavier door profiles or exposed shelving edges that benefit from a thicker edge line.
The combination of 3mm thickness and 15/16 inch width on this ABS edgeband gives you a defined envelope that supports repeatable trimming and finishing from part to part, because every edge starts from the same material cross-section. The ABS material designation means you are working with a consistent plastic base, so cutting, trimming, and scraping behaviors stay predictable across the entire 328 foot roll. The manufacturer part number 8800P-B-1503-1 uniquely identifies this Summer Elm variant, which helps keep color and specification control tight when reordering for ongoing programs or matching previous installations. The Arborite W-459 good match reference links this edgeband directly to that decorative surface pattern, so design intent around that color family can be carried from flat surfaces to edges without guesswork.
This Summer Elm edge banding is 3mm thick and 15/16 inch wide, so it suits edges that need a thicker profile while still covering standard panel thicknesses for clean trimming.
Edgebanding 8800 Summer Elm 3mm is identified as ABS, giving you a thermoplastic edge material that behaves consistently during machining and trimming along the roll length.
This ABS edge banding is specified as 328 feet per roll, supporting longer production runs where continuous material helps maintain color and texture consistency.
This product is described as Arborite W-459 good, which means its Summer Elm tone is aligned with that decorative surface pattern for coordinated edges and panels.
The manufacturer is Doellken Woodtape, positioning this Summer Elm ABS edge banding within their established edge banding product range for woodworking applications.
Part number 8800P-B-1503-1 uniquely identifies this 3mm x 15/16 Summer Elm ABS edge banding variant, helping keep reorders and color matching consistent across projects.
The defined 3mm thickness, 15/16 inch width, and ABS construction of Edgebanding 8800 Summer Elm 3mm give you clear parameters when planning cabinet and casework edges. With its Arborite W-459 good Summer Elm reference and 328 foot roll length, this Doellken Woodtape edge banding supports coordinated, repeatable work across larger runs where consistent color, thickness, and width matter from the first panel to the last.
Sold In: 328 Lineal Ft