Karran quartz single bowl sink is a 33 inch wide by 22 inch deep quartz sink designed for kitchen use where a single, open bowl layout is preferred. Made from natural granite, quartz, and premium acrylic resins, it combines engineered and natural materials to create a hard-wearing basin that supports everyday cleaning, prep, and pot washing. The uniform color throughout means minor surface wear stays less noticeable over time, helping jobs look consistent after installation. Its non-porous surface prevents bacteria build-up, so the bowl cleans down quickly between tasks and supports sanitary kitchen workflow. Heat resistance up to 530 F allows contact with hot pots and pans within normal kitchen use without damaging the sink surface under rated conditions. As part of Karran's quartz sinks product class, this model is configured as a single bowl for straightforward layout planning and cutout work.
This Karran 33 inch by 22 inch quartz concrete single bowl sink is suitable for top mounting into any type of countertop, giving flexibility when planning drop-in cutouts. All faucets must be sink mounted, so the sink deck takes the faucet hole drilling instead of relying on the countertop, which simplifies faucet layout on some materials. The note that quartz sinks can only be mounted to solid surface or stone countertops and cannot be mounted to laminate tops defines where this model can be installed, guiding substrate selection on new work or remodels. All external dimensions are approximate to 1/4 inch, which matters when laying out cut lines and verifying clearances in tight cabinet or appliance situations.
The Karran 33 inch wide x 22 inch deep quartz concrete single bowl top mount sink is intended for kitchen applications where a full-width bowl is preferred over divided compartments. Its classification as a top mount sink allows it to be set into a properly sized cutout in solid surface or stone countertops, so the rim rests on the deck and carries the load. The specified suitability for top mounting into any type of countertop, combined with the installation rule that quartz sinks can only be mounted to solid surface or stone countertops, makes this sink a match for solid surface, quartz, natural stone, and similar rigid tops. Because all faucets must be sink mounted, this model suits layouts where the sink deck is planned as the plumbing fixture platform, such as when backsplash details or thin front rails limit countertop drilling locations.
Being made from natural granite, quartz, and premium acrylic resins, this sink offers a stable, dense structure that supports repeatable cuts and mounting when fabricators work within the 1/4 inch external dimension tolerance. The sink's scratch, chip, and heat resistance up to 530 F reduces the impact of day-to-day contact with cookware, which helps installed projects retain their finished look after turnover to the client. Its non-porous, bacteria-resistant surface simplifies clean-up, helping end users maintain the sink without aggressive scrubbing that could otherwise shorten service life. The uniform through-body color supports refinishing or light surface repairs within normal practices, since color remains consistent through the thickness. A 25 years Limited Warranty against manufacturer's defects underscores the long-term performance expectation for this Karran quartz sink, which matters on projects where the sink is a permanent, built-in component tied to countertop and cabinet work.
The Karran QT-670-CN quartz sink is 33 inches wide by 22 inches deep, so it fits standard kitchen base layouts planned around that footprint.
The Karran QT-670-CN is suitable for top mounting into any type of countertop, so it drops into a cutout and rests on its perimeter rim.
This Karran quartz sink can only be mounted to solid surface or stone countertops, so it is intended for rigid, non-laminate deck materials.
The QT-670-CN requires that all faucets be sink mounted, so faucet holes are drilled in the sink deck rather than the surrounding countertop.
The QT-670-CN has a non-porous surface that prevents bacteria build-up, so residues stay on the surface and wipe away more easily during cleaning.
The Karran quartz sink is heat resistant up to 530 F, allowing contact with hot water and cookware within that rating during normal kitchen use.
The Karran 33 inch x 22 inch quartz concrete single bowl top mount sink QT-670-CN offers a scratch, chip, and heat resistant basin built from natural granite, quartz, and premium acrylic resins. Its non-porous, bacteria-resistant surface and uniform color throughout support long-term appearance in active kitchens. With suitability for top mounting into solid surface or stone countertops and a requirement for sink-mounted faucets, it fits projects planned around a drop-in layout. A 25 years Limited Warranty against manufacturer's defects supports long-run performance expectations on finished installations.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KAAG Mfr# AG | Seam Adhesive Guns For Karran Sinks AG | ||||
Sold in: 1 Each | KA70020 Mfr# TIPS | Cartridge Mixing Tips for 250ml Seaming Adhesive | ||||
Sold in: 1 Each | KAPROTECT-TAPE Mfr# PROTECT PLUS TAPE | Protect Tape For Karran Sinks, 2" |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KALUSTEROIL Mfr# LUSTERPRO | LUSTER OIL QUARTZ/GRNITE SINK CLEANER, LUSTERPRO |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KAQBSCN Mfr# QBSCN | 3-1/2" Quartz Strainer Basket, Concrete | ||||
Sold in: 1 Each | KAL-1 Mfr# L-1 | 3-1/2 steel strainer basket by Karran L-1 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KAQDFCN Mfr# QDFCN | 3-1/2" Quartz Disposal Flange, Concrete |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KA70004K Mfr# BRISSA | stainless steel seam adhesive brown 250ml |