Festool Vlies 6 inch sanding disc gives a 100 grit aluminum oxide abrasive face that cuts consistently, which helps technicians sand surfaces to a predictable profile before further finishing steps. The disc is suitable for paints, clear coats, fillers, wood, and metals, so one abrasive type can handle varied prep work around a shop. That versatility matters when moving between cabinet components, metal fixtures, and repaired areas on the same project. The disc is also suitable for sanding off old clear coats, so finish layers can be removed in a controlled way rather than gouging into the base material. Because the disc is suitable for removing rust and dirt, it supports surface cleanup on metal parts and neglected hardware, preparing them for refinishing or repainting without changing tools. The aluminum oxide construction works as a general-purpose abrasive across these materials, keeping workflow straightforward for professional and serious DIY users.
The 6 inch size positions this disc for sanders using that pad diameter, which helps operators maintain edge control on cabinetry or panel work. The A100, or 100 grit, rating defines the cut as a mid-range abrasive that removes coatings while still leaving a surface appropriate for additional finishing. Because it is suitable for paints, clear coats, fillers, wood, and metals, the disc supports a workflow where the same abrasive type can be carried from surface prep through repair leveling and final scuffing. Its suitability for removing rust and dirt means it can transition from restoration-style cleanup on metals to routine prep on cleaner substrates without changing abrasive families.
This Festool abrasive disc is suitable for paints, so it fits repaint preparation on doors, frames, and cabinet faces where a consistent scratch is needed for adhesion. It is suitable for clear coats, which ties it directly to jobs that involve scuff-sanding existing clear finishes or taking down old clear layers during refinishing. Suitability for fillers supports leveling patch work on cabinet faces, trim, or furniture, helping repaired spots visually disappear under finish. Because it is suitable for wood, the disc can be used on bare or previously finished wood surfaces as part of surface preparation. Suitability for metals and for removing rust positions the disc for use on hinges, brackets, and other metal components where surface contamination must be cleared before coating. Its suitability for removing dirt further supports cleanup on workpieces that have been stored or handled in less-than-ideal conditions.
The 100 grit aluminum oxide structure provides a balance between material removal and finish refinement, helping coat layers come off without excessively scratching the substrate. On paints and clear coats, this mid-range grit allows sanding off old finishes while leaving a surface that promotes bonding of new coatings. When working over fillers, 100 grit helps knock high spots down to the surrounding material so the repair transitions smoothly under primer or topcoat. On wood, this grit refines the surface after heavier shaping steps, supporting an even appearance once stain or clear finish is applied. On metals, the same 100 grit aluminum oxide that is suitable for rust removal cuts through oxidation and dirt while leaving a manageable scratch pattern for primers. Across these tasks, having a defined A100 abrasive grade supports repeatable results from project to project when the same process is followed.
The Festool Vlies 6 inch sanding disc is suitable for paints, clear coats, fillers, wood, and metals, so it covers common cabinet, furniture, and metal component prep tasks in one abrasive line.
The 100 grit rating gives a medium cut that removes coatings and levels fillers while leaving a scratch pattern suited to follow-up finishing steps on wood, paint, or metal.
This sanding disc is suitable for sanding off old clear coats, which helps refinishers strip or level clear finishes without aggressively digging into the substrate.
The disc is suitable for removing rust, so it can clean oxidized metal parts and prepare them for primers or new coatings during restoration or repair work.
The aluminum oxide abrasive provides a general-purpose cutting surface that works across paints, clear coats, fillers, wood, and metals in typical shop and jobsite prep tasks.
The Festool part number 201126 identifies this specific VLIES 6 inch A100 abrasive disc, helping buyers match the same disc style when reordering for ongoing work.
The Festool Vlies 6 inch 100 grit aluminum oxide sanding disc suits paints, clear coats, fillers, wood, and metals, so it fits shops handling varied substrates. Its suitability for removing rust and dirt adds restoration potential. For projects combining coating removal, repair leveling, and final prep, this disc keeps surface work within one abrasive family. Selecting this disc through Wurth Baer Supply connects that capability to a distributor focused on woodworking and related trades.
Sold In: 1 Box