Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock self-close 1/4 overlay hinge delivers a semi-concealed face-frame solution that automatically pulls the door shut, which helps doors sit consistently against the frame in everyday cabinet use. As a double demountable hinge, it uses demountable connections at both the door and frame, which lets installers remove or refit doors without disturbing hinge screws in the wood. The steel construction provides a solid hinge body, which supports dependable motion at the pivot over repeated openings. A 1/4 inch overlay sets the door position on the frame, which keeps reveals uniform when matched across a run of doors. The oil rubbed bronze finish establishes a dark, classic tone on visible hinge portions, which coordinates with similar finishes on pulls and knobs. At 2-1/4 inches in length and 1-1/2 inches in width, the hinge footprint suits common cabinet layouts while staying largely out of sight.
This Amerock CMR8701ORB hinge uses a screw-on installation method, which gives installers direct control over mounting depth and angle on the face frame and door styles that accept screws. The double demountable configuration engages into routed or machined slots on both the door and frame, which supports firm engagement while still allowing removal without backing out mounting screws from the wood. A 1-3/8 inch projection defines how far the door edge moves out from the frame at full thickness of the hinge, which influences clearance between adjacent doors and nearby components. With a 2-1/4 inch length or diameter measurement and a 1-1/2 inch width, the hinge mounts within typical cabinet stile dimensions, which suits common residential and light commercial cabinet construction that follows similar face-frame sizes.
The Amerock self-close 1/4 overlay hinge serves face-frame cabinet applications that call for a semi-concealed style and a 1/4 inch overlay door layout, which is often used in traditional framed kitchen and bath cabinets. Its double demountable design connects to both the frame and door with demountable fittings, which supports cabinet lines where doors may be removed during finishing or later service. The oil rubbed bronze finish presents a dark, warm tone on the visible knuckle and leaf areas, which integrates into design schemes using matching oil rubbed bronze pulls and knobs. Because the hinge is part of the semi-concealed hinge class, it keeps most of the hardware hidden behind the door, which leaves only the styled portion visible when the door is closed. This appearance supports cabinetry where hardware function is needed but a fully exposed surface-mount hinge is not desired.
The self-close action on this Amerock CMR8701ORB hinge draws the door toward the frame at the end of its swing, which promotes consistent door resting positions and reduces small gaps that can appear when doors are left slightly ajar. The defined 1/4 inch overlay gives a fixed reference for door sizing relative to the face frame opening, which improves layout planning and repeatability across multiple cabinets in the same project. Steel construction strengthens critical areas around the knuckle and mounting legs, which supports long-term pivot performance in frequently used doors. The 2-1/4 inch by 1-1/2 inch body size provides a known mounting envelope, which simplifies choosing door edge preparations and frame locations that maintain clearances between neighboring hinges. The 1-3/8 inch projection figure helps plan how far the door will stand off from the frame edge in the open and closed positions, which becomes important when coordinating corner cabinets or adjacent walls.
The Amerock self-close 1/4 overlay hinge is intended for face-frame cabinets using 1/4 inch overlay doors, which sets a modest reveal around each framed opening.
The Amerock CMR8701ORB double demountable hinge connects to both door and frame with demountable joints, which allows doors to be removed without taking out the main mounting screws.
The Amerock self-close 1/4 overlay hinge uses a self-close mechanism that pulls the door shut near the end of travel, which helps doors seat firmly against the frame.
The oil rubbed bronze finish gives the hinge a dark, traditional look on visible parts, which coordinates with other oil rubbed bronze cabinet hardware in the same installation.
The stated 2-1/4 inch length or diameter and 1-1/2 inch width describe the hinge body size, which helps align it with common cabinet stile widths and door edges.
The 1-3/8 inch projection shows how far the hinge moves the door out from the frame, which matters when spacing doors near corners or adjacent cabinets.
The Amerock CMR8701ORB self-close 1/4 overlay double demountable hinge pairs steel construction with a semi-concealed face-frame layout, which suits many framed cabinet runs using 1/4 inch overlays. Its oil rubbed bronze finish aligns with matching decorative hardware, which keeps visible components coordinated across a room. Wurth Baer Supply offers this hinge in full box quantities of 100 pairs, which supports multi-cabinet installations and shop production runs using a consistent hinge specification.
Sold In: 100 Pair