Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Commercial floor fan 20in from Northern Safety provides adjustable air movement in work areas that need focused cooling. The 20 inch floor fan diameter moves air across benches, machines, or staging areas, helping clear warm or stagnant zones in shops and job spaces. The adjustable tilt head shifts the airflow direction, so air can be aimed at workstations, drying areas, or general circulation, improving comfort and visibility around materials and equipment. Rubber floor guards on the base protect floor surfaces from marring, which is important in finished areas or where sealed concrete and coated floors must stay presentable. A 7 foot power cord with an SJT-type 3-conductor plug reaches common outlets around the shop, allowing flexible placement without stretching cords across busy paths. UL listing and compliance with OSHA standards establish that this fan meets recognized safety benchmarks for many commercial and industrial environments.
This 20 inch commercial floor fan sits directly on the floor, so placement is a matter of locating a stable, flat surface in the work area, which supports steady operation around tools and foot traffic. The rubber floor guards contact the ground and help keep the fan from scuffing or scratching finished floors, which matters in warehouses, production spaces, or maintenance areas with coated surfaces. The adjustable tilt head rotates the fan housing to change the angle of airflow, helping direct air across work tables, down aisles, or toward equipment that generates heat. A 7 foot power cord with an SJT-type 3-conductor plug connects the fan to standard grounded outlets, giving a practical radius for positioning between benches, machines, and service zones without relocating power.
The TPI 20 inch commercial floor fan, sold under the Northern Safety brand, is categorized under shop and safety supplies for cooling and fans, aligning it with woodworking, maintenance, and general industrial environments that need steady air movement. Its commercial floor fan, 20in size offers a footprint and output suited to shops that require targeted cooling rather than building-wide systems, supporting air circulation near benches, assembly lines, or repair bays. The 3-speed, 1/5 HP motor delivers 2950, 3100, or 3450 CFM airflow levels, which allows the fan to address different zones, from lighter circulation around stored materials to higher movement around active machinery. The adjustable tilt head lets crews point that airflow up, down, or level across work areas, so a single fan can serve changing layouts, seasonal conditions, and varying heat loads throughout the day.
The open ventilated, permanently lubricated, sleeve bearing motor is built so lubrication is handled internally rather than by routine user oiling, which supports consistent performance during extended shop hours. This construction helps the 3-speed, 1/5 HP motor maintain output at each CFM rating, so when a setting is chosen for a process, the airflow remains dependable for cooling, drying, or ventilation tasks. The rubber floor guards matter for repeatable positioning; by protecting the surface beneath the fan, they allow the fan to be repositioned as workflows change without leaving scrape marks that disrupt work areas. UL listing confirms the fan meets recognized electrical safety criteria, and OSHA standards compliance aligns it with typical regulatory expectations in commercial and industrial spaces, supporting ongoing use as part of broader safety programs. The 7 foot SJT-type 3-conductor cord helps maintain a consistent setup, because the fan can be repositioned within that radius without altering power arrangements, keeping layouts stable while airflow is fine-tuned through tilt and speed adjustments.
The TPI 20 inch commercial floor fan provides 2950, 3100, and 3450 CFM settings, so airflow can be matched to lighter circulation or stronger spot cooling needs in a shop or industrial workspace.
The adjustable tilt head directs the air stream up or down, allowing crews to aim airflow toward benches, equipment, or aisles for more effective cooling and ventilation where work is concentrated.
The open ventilated, permanently lubricated, sleeve bearing motor handles lubrication internally, supporting continuous operation with less manual servicing during regular shop or plant use.
Rubber floor guards contact the floor and resist marking, helping protect sealed concrete, coated surfaces, or finished floors as the fan is repositioned around changing work setups.
This commercial floor fan uses a 7 foot power cord with an SJT-type 3-conductor plug, so it connects to standard grounded outlets within a practical working radius.
UL listing and OSHA standards compliance indicate the fan meets established electrical and safety benchmarks, supporting its use in regulated commercial and industrial environments.
The TPI 20 inch commercial floor fan from Northern Safety pairs an adjustable tilt head with 3-speed, 2950/3100/3450 CFM performance, so crews can tune airflow to specific work areas. Rubber floor guards and a 7 foot SJT-type 3-conductor cord support stable placement on shop floors while protecting surfaces. With a 1/5 HP, open ventilated, permanently lubricated, sleeve bearing motor, UL listing, and OSHA standards compliance, this commercial floor fan 20in is suited to demanding shop and industrial cooling tasks. Select this model when focused, adjustable air movement is needed around woodworking, assembly, or maintenance stations.