Polypropylene disposable coverall from Northern Safety provides a barrier from particulates so clothing and skin stay shielded during dusty, dirty, or overspray-heavy work. The unique SMS fabric is 3 layers of polypropylene, which wicks away perspiration by allowing air and water vapors to pass through, helping workers stay more comfortable through longer tasks. The coverall is designed as protective clothing in an extra large size, so it suits many tradespeople and serious DIY users who prefer a roomier fit over regular workwear. A generous fit supports full range of motion during general maintenance or assembly work where reaching and bending are constant. The white color keeps contamination and surface dust visually obvious, which helps maintain cleaner conditions in glue and coatings spraying or other finish-sensitive jobs.
This protective clothing uses elastic at the wrists, ankles, and collar so edges stay closer to gloves, footwear, and necklines, reducing open paths where particulates can reach inner layers. The extra large sizing and generous fit allow the coverall to be worn over standard workwear, so crews can pull it on for tasks like general maintenance, assembly applications, or glue and coatings spraying without changing base layers. A full-length 2-way zipper with cover flap simplifies putting the coverall on and taking it off while allowing targeted opening from either direction if temporary access or limited venting is needed. Sewn seams support the overall structure during constant movement, so the coverall remains functional across the job instead of stressing at panel joints.
This Northern Safety ActivGARD polypropylene disposable coverall is positioned under shop and safety supplies as protective clothing, which aligns it with daily use in maintenance and assembly environments. Primary applications are general maintenance, assembly applications, and glue and coatings spraying, so it fits well into workflows that generate dust, debris, and airborne particulates. The coverall provides a barrier from particulates, keeping underlying garments, skin, and hair more isolated from these materials as work progresses around machines, fixtures, or building systems. Because the unique SMS fabric is formed from 3 layers of polypropylene, the suit balances particulate barrier performance with breathability, so workers in assembly lines or maintenance routes can stay covered while heat and moisture move outward.
The coverall is manufactured in an ISO 9002 registered facility, which indicates the production process follows a recognized quality management system, giving operations managers consistent expectations from suit to suit. Tear and abrasion resistant construction means that when workers contact rough equipment surfaces or building materials during inspection, tightening, or component replacement, the garment is designed to resist quick failure. The white color supports visual checks of dust and overspray on the outer layer, which is useful when glue and coatings spraying tasks demand a cleaner finished surface underneath.
The generous fit of this extra large coverall helps it layer smoothly over standard work clothing, which lets crews pull protection on before walking into dusty or overspray-prone zones and remove it afterward while core garments remain cleaner. Elastic at the wrists and ankles helps the fabric sit closer to gloves and footwear, so particulate routes at these frequent motion points stay more controlled during jobs such as overhead maintenance or floor-level assembly. The collar elastic works with the hood to hold the upper opening near the neck and head, which helps maintain a continuous barrier in environments with drifting particulates from glue and coatings spraying.
The full-length 2-way zipper with cover flap serves as the primary closure, allowing quick entry and exit at shift changes or job-phase transitions while the flap extends the particulate barrier over the zipper area. Sewn seams tie these panels together so the fabric structure can tolerate stretching, kneeling, and reaching without seams separating under load. Because the SMS fabric wicks away perspiration by allowing air and water vapors to pass through, workers remain more comfortable inside the coverall across longer maintenance or assembly cycles, supporting consistent use whenever general shop conditions call for disposable protective clothing.
The coverall uses unique SMS fabric that is 3 layers of polypropylene, providing a particulate barrier while allowing air and water vapors to pass through for better comfort during work.
The coverall has elastic at the wrists, ankles, and collar, which helps close gaps at these edges so dust, overspray, and other particulates have fewer paths to reach inner clothing.
The coverall is extra large with a generous fit, allowing it to be worn over typical work garments so workers maintain movement while gaining an added particulate barrier layer.
The full-length 2-way zipper with cover flap offers easy on and off plus access from top or bottom, while the flap extends protection along the zipper line against particulates.
The coverall lists primary applications as general maintenance, assembly applications, and glue and coatings spraying, making it suited to dusty or overspray-heavy shop and plant tasks.
The coverall is manufactured in an ISO 9002 registered facility, indicating production follows a recognized quality management system for consistent garment construction and performance.
The ActivGARD polypropylene disposable coverall in extra large from Northern Safety combines a particulate barrier with breathable 3-layer SMS polypropylene, practical elastic at key openings, and a full-length 2-way zipper with cover flap. These details support general maintenance, assembly applications, and glue and coatings spraying where protecting base clothing and skin from particulates matters. Choosing this protective clothing through Wurth Baer Supply aligns shop and facility work with disposable coverage that is tailored to dusty and overspray-heavy conditions.
Sold In: 1 Each