HandiSCREWS color matched slatwall screws are steel screws in a graphite finish designed for Handi WALL applications, so they fasten HandiSOLUTIONS slatwall while visually blending into graphite Handi WALL panels. The 2-1/2 inch drywall screw length described as DRYWALL SCREW 2.5, GRAPHITE reaches through typical slatwall and drywall to bite into framing or backing, supporting secure mounting of Handi WALL systems. Their steel construction provides a heavy-duty installation, which supports loaded slatwall storage layouts in closets or garages. All screws have painted heads, so the graphite color on the head continues the Handi WALL color down to the fastener, reducing visible contrast on finished wall runs. The HandiSOLUTIONS branding and HSWS1325G part number tie these screws directly to the Handi WALL line, simplifying product selection when building out or extending an existing Handi WALL installation.
The drywall screws described as DRYWALL SCREW 2.5, GRAPHITE use a 2-1/2 inch length that passes through Handi WALL slatwall material and the drywall layer to anchor into studs or backing, supporting firm engagement for vertical loads. As drywall screws within the Handi WALL applications lineup, they fit common wall build-ups where slatwall is mounted over gypsum board, reducing the need to source separate fasteners for that wall structure. Their graphite color matching to Handi WALL panels means the visible portion of each screw blends with the panel surface, so fastener placement impacts appearance less on detailed layout jobs.
HandiSCREWS color matched slatwall screws are specified for Handi WALL applications, which positions them for closets, garage organization, and general storage layouts built around HandiSOLUTIONS slatwall. The 2-1/2 inch drywall screw length supports mounting slatwall over drywall where studs or backing sit behind the gypsum, so panels install securely on framed walls. Their steel construction delivers the heavy-duty installation referenced in the product description, which helps support typical loads from shelves, hooks, and storage components connected to the Handi WALL system. Because all screws have painted heads in a graphite tone, they visually align with graphite Handi WALL colors, maintaining a consistent look across long panel runs.
The HandiSOLUTIONS HSWS1325G part number identifies these screws within the Handi WALL family, so matching HSWS1325G to graphite DRYWALL SCREW 2.5, GRAPHITE helps standardize fastener choice across multiple jobs. Being described as part of a variety of steel screws for all Handi WALL applications, they integrate into a system that also offers deck screws and flat head Tapcon screws, so the drywall screws can be used where gypsum and framing are present while other HandiSOLUTIONS screws address concrete or brick. The painted screw heads keep the graphite color visible at the surface, supporting clean rows of Handi WALL panels without bright fastener heads catching the eye on finished installations. This combination of system-specific branding, defined 2-1/2 inch drywall screw length, steel construction, and color matching supports repeatable slatwall wall builds where appearance and holding power both matter.
The HSWS1325G part is described as DRYWALL SCREW 2.5, GRAPHITE, so it functions as a 2-1/2 inch drywall screw for use in Handi WALL applications needing that length.
The painted graphite heads match graphite Handi WALL colors, so fasteners visually blend into the panel surface and help maintain a uniform, project-ready appearance.
These screws are described for all Handi WALL applications, so they are intended for fastening HandiSOLUTIONS slatwall in storage, closet, or garage layouts using that system.
The 2-1/2 inch length allows the drywall screw to pass through slatwall and drywall to reach studs or backing, supporting strong anchoring behind the Handi WALL panels.
Steel construction provides the heavy-duty installation noted in the description, so Handi WALL panels have solid support when loaded with typical slatwall storage gear.
The description notes a variety of steel screws for all Handi WALL applications, so these drywall screws work alongside deck screws and flat head Tapcon screws in the same system.
HandiSCREWS color matched slatwall screws in the HSWS1325G graphite version combine steel construction, 2-1/2 inch drywall screw length, and painted graphite heads to match Handi WALL panels. For Handi WALL applications that mount slatwall over drywall into framing, this DRYWALL SCREW 2.5, GRAPHITE option offers a system-matched fastener that supports heavy-duty installation and a clean, coordinated graphite appearance across the wall.
Sold In: 1000 Each