Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Tailored Traditional brushed nickel pull is a solid brass handle designed for cabinet and furniture doors that need a 5-1/16 inch (128 mm) center to center mounting layout, giving installers a precise match for that drilling pattern. The 5-3/4 inch overall length provides hand clearance across standard cabinet rail widths, which supports comfortable everyday operation on doors and drawers. Its brushed nickel finish presents a muted metallic surface that helps blend with many brushed nickel hinges and other decorative hardware. The pull projects 1-5/16 inch from the mounting surface, creating room for fingers to grasp without contact against the cabinet face. With a width of 11/16 inch, the grip has a slim profile that suits smaller drawer fronts and narrow rails while still providing a defined edge to pull against during use.
The 128 mm center to center mounting on this Berenson 1284-1BPN-P pull sets a fixed distance between screw holes, allowing cabinets drilled to that standard metric spacing to accept the pull directly. Its 5-3/4 inch overall length lines the handle body slightly beyond the mounting points, which can help visually center the pull on many door and drawer widths. The 1-5/16 inch projection defines how far the grip stands off the cabinet front, which influences finger clearance when installed on thicker doors or drawer fronts. With a width of 11/16 inch, the pull face stays compact across the rail, which is practical on smaller fronts where space between hardware pieces is tight.
This Berenson Tailored Traditional Series 5-1/16 inch (128 mm) center to center brushed nickel pull is suited to cabinet and furniture installations using a 128 mm boring pattern, because the mounting holes match that spacing. Its 5-3/4 inch length works across a range of cabinet door and drawer sizes, giving enough bar length for a full hand grip on typical kitchen, bath, or shop storage fronts that follow these dimensions. The 1-5/16 inch projection helps create a consistent stand-off line when used in multiples across a bank of doors or drawers using the same model, which is important when aligning hardware visually on built-ins or casework. The 11/16 inch width keeps the pull visually lighter on smaller fronts, so it can be used on narrow drawer faces where wider hardware might crowd the available surface.
The 5-1/16 inch (128 mm) center to center dimension on the Berenson 1284-1BPN-P pull supports repeatable layouts by locking in a known metric spacing that works with common drilling templates and jigs sized for 128 mm hardware. The 5-3/4 inch overall length helps maintain consistent reveal beyond the mounting holes, so multiple pulls lined in a row show the same overhang from their screw centers, which keeps long cabinet runs visually even. Its 1-5/16 inch projection not only affects grip space but also sets a fixed offset from the face, helping installers keep parallel alignment between handles and nearby tall doors, appliance panels, or adjacent trim. The solid brass construction gives the pull a metal body suited for decorative hardware applications where the handle will be operated many times, supporting long-term cabinet use in active spaces.
The Berenson Tailored Traditional Series pull uses a 5-1/16 inch (128 mm) center to center dimension, which matches cabinet doors or drawers pre-bored for the 128 mm spacing.
The Berenson 1284-1BPN-P pull has a 5-3/4 inch overall length, so it spans slightly beyond its 128 mm mounting holes for balanced coverage on many fronts.
The pull projects 1-5/16 inch from the cabinet surface, providing finger clearance between the grip and door or drawer face during operation.
The Tailored Traditional Series pull is made from solid brass, providing a metal construction suited to decorative cabinet hardware applications.
This Berenson cabinet pull has a brushed nickel finish, giving it a brushed metallic appearance that coordinates with other brushed nickel hardware.
The 128 mm center to center pull has a width of 11/16 inch, providing a slim front profile across the cabinet rail or drawer front.
The Berenson Tailored Traditional Series 5-1/16 inch (128 mm) center to center brushed nickel pull gives you a solid brass handle with defined dimensions: 5-3/4 inch length, 1-5/16 inch projection, and 11/16 inch width. When a project is laid out for 128 mm boring, those measurements provide a clear match for both hole spacing and visual proportion across doors and drawers. For cabinet or furniture runs that rely on a brushed nickel decorative hardware theme, this 1284-1BPN-P pull from Wurth Baer Supply offers a consistent option to align appearance and mounting pattern across the job.
Sold In: 1 Each
