Berenson Tailored Traditional Series 6-5/16" (160 mm) Center to Center Matte Black Pull, - 1293-1055-P

Berenson Tailored Traditional Pull For Cabinets

Berenson Tailored Traditional pull 160mm is a solid brass cabinet pull in a matte black finish that dresses cabinet fronts while providing a reliable hand grip. The pull belongs to the Tailored Traditional collection, so its profile supports traditional styling where consistent design across doors and drawers matters. A center to center measurement of 6-5/16 inches, or 160 mm, spaces the mounting points for a wide drawer or larger cabinet door, which helps distribute hand force along the front. The overall length of 7 inches gives the hand room across the stile, supporting a full, stable grasp when opening heavier fronts. A projection of 11/16 inch stands the pull off the face just enough for fingers to wrap behind it, which keeps knuckles off the surface during regular use. A width of 1-3/8 inches adds visual weight to the pull, which can align with substantial cabinet frames.

Key Tailored Traditional Pull Job Advantages

• The solid brass material gives the pull a substantial body, which helps the handle feel firm under load on regularly used cabinet doors and drawers.
• The matte black finish provides a muted, low-sheen appearance, which supports projects that call for dark hardware without reflective glare on cabinet faces.
• The 6-5/16 inch center to center dimension sets consistent hole spacing, which matters when laying out multiple pulls across wide drawer banks for straight visual lines.
• The 7 inch overall length covers more of the rail or stile, which helps visually anchor the pull on larger cabinet fronts and balances its traditional style across the panel.
• The 11/16 inch projection creates finger clearance behind the pull, which supports comfortable gripping and reduces contact with the cabinet surface during repeated operation.
• The 1-3/8 inch width provides a broader front face, which can align with traditional cabinet designs that benefit from hardware with noticeable presence.

Mounting Dimensions That Guide Pull Placement

The 160 mm center to center dimension on this Berenson solid brass cabinet pull determines drilling layout for mounting, which helps installers align multiple pulls along a run of doors or drawers. With a 7 inch overall length, there is a small margin beyond the drilled points, which allows the pull to visually cover the hardware area on the rail. The 11/16 inch projection defines how far the pull stands off the face, which influences how deep templates or jigs sit when referencing from the cabinet edge. A width of 1-3/8 inches sets the front profile of the pull, which can be used to plan spacing from adjacent doors or walls so the pull clears neighboring fronts during operation.

Using This Matte Black Pull In Cabinet Projects

Where The Tailored Traditional Pull Fits Best

This Tailored Traditional matte black pull belongs to Berenson Corporation's decorative Handles and Pulls category, so it is suited to cabinet and furniture fronts where visible hardware is part of the design. The 6-5/16 inch center to center measurement lines up with projects using wider fronts, such as base cabinet drawers, where a longer pull provides leverage across the span. With an overall length of 7 inches, the pull visually matches larger face frames or full-overlay panels, helping the hardware look proportionate to the cabinet size. The matte black finish lets the pull act as a contrast detail on lighter finishes or a quieter element on dark finishes, which matters when planning a consistent run of cabinetry. Solid brass construction supports use on frequently accessed cabinets, where a firm-feeling pull contributes to a finished installation.

Details That Support Repeatable Cabinet Results

The 160 mm center to center drilling on this 1293-1055-P matte black pull provides a fixed dimension that can be built into shop drawings or jigs for repeat layouts, helping keep hole locations consistent from cabinet to cabinet. The overall 7 inch length gives a predictable footprint when aligning pulls to rails or stile edges, which assists with setting even reveal distances across a room. A projection of 11/16 inch defines how far the pull sits off the door, which can be factored into clearance planning near tall end panels or appliances. The 1-3/8 inch width of the front face influences how far the hardware extends over narrow rails, guiding layout when space between adjacent doors is tight. The solid brass material and matte black finish work together to provide a defined, traditional style element that can be specified across an entire project using the same part number.

Common Questions About This Berenson Cabinet Pull

Select This Pull For Traditional Matte Black Runs

The Berenson Tailored Traditional pull 160mm center to center pairs solid brass construction with a matte black finish and defined dimensions, giving cabinet projects a repeatable hardware choice. The 6-5/16 inch center to center drilling, 7 inch overall length, 11/16 inch projection, and 1-3/8 inch width together deliver a traditional profile that suits larger doors and drawers. For runs that need coordinated hardware from a single Tailored Traditional collection, this 1293-1055-P pull offers a consistent matte black option.