Berenson Tailored Traditional Series 8-13/16" (224 mm) Center to Center Matte Black Pull, - 1299-1055-P

Berenson Tailored Traditional Pull For Cabinet Runs

Berenson Tailored Traditional pull gives you an 8-13/16 inch center to center handle that spans wider cabinet faces, so you can line up multiple doors and drawers with consistent spacing across a run. The solid brass construction provides a sturdy pull point when doors and drawers are loaded, which supports smooth operation during everyday use. A matte black finish puts a dark, uniform surface on the pull, helping it visually anchor on light or dark fronts in kitchens, baths, or built-ins. The 9-5/8 inch overall length creates a long grip area that feels substantial in the hand, useful on taller doors or wider drawer fronts. A 1-3/8 inch projection stands the pull off the face of the cabinet, creating finger clearance for a comfortable grab. The 13/16 inch width gives the pull a defined profile that reads as a traditional, tailored accent on faceframes or slab fronts.

Key Pull Details That Support Cabinet Layout

• The 8-13/16 inch center to center dimension sets the mounting hole spread, allowing accurate drilling and jig setup when laying out multiple doors or drawers on a project.
• The 9-5/8 inch length defines the overall footprint on the front, helping you balance the handle size with tall pantry doors or wide drawer fronts during design.
• The 1-3/8 inch projection establishes stand-off from the surface, creating working finger clearance while keeping the pull close enough to avoid catching on clothing in tight walkways.
• The 13/16 inch width controls how much of the cabinet face the pull visually occupies, letting you coordinate it with rail heights and stile widths in traditional layouts.
• The solid brass material gives the pull a dense feel at the grip point, which supports repeated daily use on frequently opened doors and drawers.
• The matte black finish provides a low-sheen surface that works with painted or stained fronts, helping tie together mixed-finish cabinetry in one hardware family.

Cabinet Pull Sizing, Hole Spread, And Fit Details

The 8-13/16 inch center to center dimension defines exactly where the two mounting points land on the cabinet face, which is useful when transferring measurements from drawings to drilling jigs or templates. With a 9-5/8 inch overall length, this pull covers more of the rail, so it suits wider drawers or doors where a small handle would look undersized. The 1-3/8 inch projection holds the grip away from the front, which helps hands clear door edges and adjacent fronts during operation. A 13/16 inch width gives the pull a balanced look on standard cabinet rails, helping it sit proportionally without crowding moulding details. The solid brass construction supports these dimensions with a stable, rigid body, maintaining alignment between the two mounting points over time.

Using This Matte Black Pull In Real Projects

Where This 224 mm Pull Works Best

The 224 mm center to center spread focuses this pull on mid to large cabinet fronts, so it fits well on kitchen base cabinets, tall pantry doors, or wider bath vanities that benefit from a longer handle. The Tailored Traditional styling pairs with the 13/16 inch width to present a scaled, classic look across multiple units, which works when repeating the pull across an entire room. A 9-5/8 inch length lets the handle span more of the drawer width, giving a visual tie between wide drawers and adjacent doors. The 1-3/8 inch projection provides an easy grip on deeper drawer boxes, helping you open loaded drawers without your fingers crowding the face. The matte black finish keeps the pull visually consistent on runs of cabinets, helping it read as one continuous hardware choice from drawer to tall cabinet.

Details That Help Repeatable Hardware Results

The 8-13/16 inch center to center dimension is the key reference for drilling patterns, so you can set up stops or templates once and repeat holes across a full bank of cabinets. The 9-5/8 inch overall length makes it easier to align the pull with existing design lines, such as rail centers or divided drawer layouts, because you can reference the total span during layout. The 1-3/8 inch projection provides a predictable stand-off, so if you are coordinating with adjacent pulls or nearby appliances, the grip depth remains consistent from unit to unit. The 13/16 inch width creates a repeatable visual band on each front, which helps when aligning hardware position with stile edges or panel reveals. Solid brass construction backs up these layout details by holding the shape of the pull at both mounting points, helping rows of hardware stay visually straight once installed.

Common Questions About This Berenson Cabinet Pull

Selecting This Pull For Your Next Cabinet Run

The Berenson Tailored Traditional pull with 224 mm center to center gives you a solid brass, matte black handle sized for wider doors and drawers, so you can maintain consistent hardware spacing. With a 9-5/8 inch length, 1-3/8 inch projection, and 13/16 inch width, the pull offers a defined grip that suits everyday cabinet use. The combination of these dimensions supports clean layout lines across banks of cabinets. When a project calls for a traditional look with a longer center to center spread, this pull provides a straightforward option built around clear, repeatable measurements.