Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Quad Series 5/8 inch pull from R. Christensen by Berenson is a cabinet pull designed for decorative hardware projects where a compact 5/8 inch (16 mm) center to center matters for tight layouts. The pull uses a Quad Series design in a transparent dark brown with matte black finish, which provides a defined visual contrast that helps align with dark or mixed-tone cabinet fronts. The zinc material construction creates a solid-feeling pull that supports everyday cabinet use in kitchens, baths, or built-ins where metal hardware is preferred. A 2 inch length or diameter paired with a 2 inch width gives the pull a square, balanced footprint on the door or drawer face, helping layout lines stay consistent from piece to piece. The 1-1/4 inch projection establishes a practical hand clearance off the face, supporting a comfortable grip while keeping the pull from extending excessively into walkways or tight spaces.
The 5/8 inch (16 mm) center to center on this Quad knob 16mm center to center pull defines the spacing between mounting points, guiding drilling patterns for door and drawer faces. A 2 inch width and 2 inch length or diameter set the footprint of the pull on the cabinet surface, which helps when laying out hardware to clear panel edges, profiles, or neighboring pulls. The 1-1/4 inch projection fixes the standoff distance from the face, shaping both hand clearance and how far the pull reaches into the room. The specified 8-32 x 1 inch screw size clarifies the threaded connection at the pull, which informs hole sizing and tapping where required in a shop workflow.
This R. Christensen Quad Series 5/8 inch center to center pull suits decorative hardware and moldings projects where a compact, square-form pull is needed. The 2 inch width and 2 inch length or diameter let it sit comfortably on smaller doors or shallow drawers in residential or shop-built cabinets. Its transparent dark brown with matte black finish aligns visually with stained woods or dark-toned laminates, so it can tie together fronts that mix veneers, paints, or laminates. The zinc material supports use in cabinet hardware installations handled by woodworking professionals, where a consistent metal feel across multiple doors and drawers matters on built-ins or full kitchen runs. As a handle and pull within the decorative hardware and moldings category, it can be specified alongside similar pieces from the same collection to keep the visual language coherent across a project.
The 5/8 inch (16 mm) center to center spec gives installers a precise dimension for drilling jigs, which speeds repeatable boring patterns on production cabinet runs. The 1-1/4 inch projection establishes a predictable clearance off the face, helping avoid interference with adjacent doors, end panels, or nearby hardware when planning tight reveals. The square 2 inch by 2 inch footprint makes it straightforward to align the pull relative to panel edges, rails, or stile boundaries, supporting consistent sightlines across multiple fronts. The transparent dark brown with matte black finish provides a defined hardware edge that makes alignment marks visually easier to check against the cabinet surface before final tightening. The specified 8-32 x 1 inch screw size ties the pull to a common fastener thread used in cabinet work, which simplifies tool selection and threading considerations when setting up an installation workflow.
The pull has a 2 inch length or diameter, 2 inch width, and 1-1/4 inch projection, so it presents a compact square footprint with practical stand-off for everyday cabinet use.
The 5/8 inch center to center dimension sets the distance between mounting points, guiding hole spacing when drilling cabinet doors or drawer fronts for this pull.
The pull is made from zinc with a transparent dark brown with matte black finish, which provides a metal body and a two-tone look suited to decorative cabinet hardware.
The pull uses an 8-32 x 1 inch screw specification at the connection point, which aligns with common cabinet hardware threading practices and drilling setups.
This pull is manufactured under the R. Christensen by Berenson brand, identified by manufacturer part number 1169-7000-P within the handles and pulls product class.
The product is classified as a handle and pull in the decorative hardware and moldings category, suited to cabinet hardware layouts where a compact metal pull is specified.
This transparent dark brown with matte black Quad knob 16mm center to center pull brings a 5/8 inch mounting pattern, 2 inch square footprint, and 1-1/4 inch projection together for cabinet work. Its zinc material and defined dimensions support layout, drilling, and repeatable mounting across multiple doors and drawers. For projects that call for a compact R. Christensen Quad pull with a clear spec sheet, this 1169-7000-P model gives you a consistent hardware choice for your next cabinet or built-in run.
Sold In: 1 Each