Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Prism pull 160mm center to center describes a decorative cabinet handle from the Prism collection that spans 6-5/16 inches between screw holes, so it fits layouts drilled to that specific center-to-center dimension on doors and drawers. The pull uses a polished chrome and white finish, tying together chrome hardware with lighter front panels in a single piece that visually matches both surfaces. The handle is made from zinc, giving the pull a metal construction while keeping the overall weight modest for common cabinet front materials. An overall length of 6-5/8 inches means the pull extends slightly past the drilling centers for a balanced look on typical cabinet widths. A projection of 1-5/8 inches sets the gripping space off the face, so fingers have room to grab without rubbing the cabinet surface in regular everyday use.
The 6-5/16 inch center-to-center mounting on this Prism series pull sets a precise distance between screw holes, so installers can work with standard drilling jigs keyed to that measurement. An overall 6-5/8 inch length then positions the handle ends just beyond those centers, which helps keep the hardware visually centered on medium-width cabinet fronts. The 1-5/8 inch projection pushes the gripping surface out from the face, so fingers can approach from below or the side without scraping painted or laminated fronts. With a 9/16 inch width, the pull stays visually lean across the cabinet, which is useful when several pulls line up on adjacent drawers in a bank. The polished chrome and white finish ties the mounting area and grip into one clean surface, so the fastened handle reads as a finished element once installed.
This Prism collection pull from R. Christensen by Berenson sits within the Decorative Hardware & Moldings category under handles and pulls, so it is built for cabinet and furniture fronts that accept screw-mounted hardware. The 6-5/16 inch center to center drilling dimension targets cabinets laid out for that specific spacing, which is common on wider drawers or taller doors that benefit from a longer grip. An overall length of 6-5/8 inches means the pull visually anchors larger fronts without overwhelming smaller panels in the same run. The polished chrome and white finish combination lets the pull sit on white doors while still tying in chrome hinges, faucets, or other hardware in the room. With a 1-5/8 inch projection off the face, the pull creates a handle that can be grabbed from different angles in kitchens, baths, or work areas.
The 6-5/16 inch center to center measurement on this 1192-7000-P Prism pull defines an exact hole spread, so multiple cabinets can be drilled with the same jig setting for consistent alignment. The 6-5/8 inch overall length then leaves just a small margin beyond the mounting points, which helps visually center the handle on drawer fronts when several pulls are installed side by side. A projection of 1-5/8 inches sets the handle away from the cabinet surface, so hands experience a clear gap while pulling, reducing contact with painted or laminated fronts during repeated use. The 9/16 inch width forms a slim bar profile, so the pull presents a clean line across modern cabinet designs while still giving enough surface for fingertips to catch. Zinc construction supports a solid-feeling handle body under load, so doors and drawers can be operated repeatedly in active household or shop environments without the pull feeling overly light. The polished chrome and white finish provides a defined contrast band, which visually reinforces handle placement and helps align hardware lines across multiple cabinet faces.
This Prism series pull uses a 6-5/16 inch center to center drilling dimension, so hole locations align with that spread when setting up cabinet doors or drawers.
The Prism pull has a 6-5/8 inch overall length, so the handle extends slightly beyond the screw centers for a balanced look on wider fronts.
This cabinet pull projects 1-5/8 inches from the cabinet face, so fingers have clearance behind the handle when opening doors and drawers.
The 1192-7000-P Prism pull has a polished chrome and white finish, so it coordinates with chrome hardware while matching lighter cabinet surfaces.
This Prism collection handle is made from zinc, so the pull provides a metal body suited to regular cabinet door and drawer operation.
The pull has a 9/16 inch width, so it presents a slim bar profile while still giving a defined edge for gripping on cabinet fronts.
This Prism series 6-5/16 inch center to center polished chrome and white pull from R. Christensen by Berenson pairs zinc construction with defined dimensions to support repeatable cabinet layouts. The 6-5/16 inch center to center drilling and 6-5/8 inch overall length align well with wider doors and drawers that benefit from a longer handle. A 1-5/8 inch projection and 9/16 inch width create a usable grip space that stays visually slim on modern fronts. When a project calls for a polished chrome and white pull that coordinates across multiple cabinets, this Prism collection handle provides a consistent option built around that exact drill spacing and profile.
Sold In: 1 Each