
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Emberlee pull satin nickel is a Liberty Hardware handle from the Classic Edge Series designed for cabinets and similar casework. The pull uses zinc die cast construction, which provides a solid metal feel that suits regular opening and closing of doors or drawers in kitchen, bath, or shop installations where a dependable grip is needed. The satin nickel finish delivers a muted metallic look that helps visually tie together hinges, latches, and other satin nickel hardware on the same run. A 6-1/4 inch center to center dimension aligns with common drilling patterns, so it works well where runs of cabinets share the same spacing. The overall 7-5/16 inch length gives the hand more contact area across wider drawer fronts, supporting smoother pulls under load. A projection of 11/16 inch sets the pull off the face enough for fingers to wrap around comfortably during daily use.
The 6-1/4 inch center to center specification on this Liberty Hardware Emberlee pull sets the exact drilling distance between mounting points, which simplifies layout when using 160mm cabinet templates or shop-made jigs. With a 7-5/16 inch overall length, the pull overhangs the mounting holes on both sides, so the hardware visually balances across mid-sized and wider drawer faces. The 11/16 inch projection describes how far the gripping surface stands off the cabinet face, guiding placement on doors that swing past adjacent surfaces. A 1-3/16 inch width defines the footprint on the front, which matters when planning spacing between multiple pulls on wide drawers or tall doors to avoid crowding while still providing adequate grip.
This 160mm center to center cabinet pull functions well on cabinet doors and drawers that benefit from a mid-length handle. The 6-1/4 inch center to center dimension supports straight-line runs of upper and lower cabinets that share a common drilling pattern, which is useful in kitchens or commercial casework where repeating hole locations saves layout time across multiple fronts. The 7-5/16 inch overall length suits standard drawer widths, providing enough span for the pull to look proportional without dominating narrow faces. With a 1-3/16 inch width and 11/16 inch projection, the pull occupies a compact footprint, which helps when doors open close to walls or appliances and a lower-profile handle is preferred while still providing functional clearance for the hand.
The specific center to center size of 6-1/4 inch on the Emberlee pull allows installers to align drilling with 160mm templates, which supports consistent results from cabinet to cabinet and reduces rework from misaligned holes. The zinc die cast material gives the pull a uniform shape and weight, so multiple units across a run match closely in feel and appearance, which matters on long banks of drawers. The satin nickel finish ties into other satin nickel components, helping the full hardware set read as one coordinated design across doors, drawers, and moldings. The 11/16 inch projection defines how much hand clearance is available, guiding installers when positioning pulls at rail intersections so fingers can comfortably engage without rubbing against the door edge. Combined, these measured details help shops and installers deliver predictable, repeatable cabinet hardware layouts.
The Classic Edge Series Emberlee pull has a 6-1/4 inch center to center spacing, matching a 160mm layout, which aligns with many cabinet drilling jigs and templates.
The Emberlee pull has a 7-5/16 inch overall length, giving a mid-length handle that sits proportionally on many standard cabinet doors and drawers.
The Liberty Hardware P34954-SN-C Emberlee pull is zinc die cast, providing a solid metal body suitable for routine cabinet door and drawer operation.
This 160mm center to center cabinet pull uses a satin nickel finish, which coordinates with other satin nickel hinges, knobs, and decorative hardware.
The Emberlee pull projects 11/16 inch from the surface, offering finger clearance while keeping a relatively low profile on doors and drawers.
The satin nickel cabinet handle measures 7-5/16 inch in length, 6-1/4 inch center to center, 1-3/16 inch in width, and 11/16 inch in projection.
The Classic Edge Series Emberlee pull from Liberty Hardware combines a 6-1/4 inch center to center layout with a satin nickel finish and zinc die cast construction, so it suits cabinet projects built around 160mm drilling patterns. The 7-5/16 inch length, 1-3/16 inch width, and 11/16 inch projection define a practical, mid-sized handle footprint that fits many kitchen, bath, or casework fronts. For cabinet runs where a consistent 160mm center to center dimension and satin nickel color are required, this P34954-SN-C pull provides a measured, repeatable solution.
Sold In: 1 Each