Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
TRANS 2.0 PULL 96MM CC SATIN NICKEL describes a cabinet pull from the Pro Value Transitions 2.0 collection, giving installers a defined series look for coordinated projects. The pull has a 3-3/4 inch (96 mm) center-to-center dimension, so drilling layouts can follow a common, repeatable pattern across multiple doors and drawers. Its 6-3/16 inch overall length provides a comfortable gripping area, which helps when operating larger or heavier cabinet fronts. The pull is made from zinc, creating a solid-feeling component that supports everyday cabinet use. A satin nickel finish on the zinc body presents a muted metallic surface that works well in many cabinet and furniture styles. With a projection of 1-3/32 inch from the mounting surface, the pull stands away from the door enough for fingers to wrap behind it without crowding adjacent fronts.
This Transitions 2.0 pull is defined by its 3-3/4 inch (96 mm) center-to-center dimension, giving a clear target when positioning new drilling or lining up with existing 96 mm bores during a hardware change-out. The 6-3/16 inch overall length means that, once mounted, the pull visually spans more of the rail, which can help balance proportion on medium-width drawers and doors. With a projection of 1-3/32 inch from the mounting surface, the pull provides clearance for fingers to hook from the side or underneath without scraping the cabinet face. A 7/16 inch width through the gripping area keeps the pull slim enough for smaller fronts, while the 7/16 inch base diameter at each contact point seats the pull cleanly against the surface for a tidy, finished appearance.
The Pro Value Transitions 2.0 pull with 3-3/4 inch (96 mm) center-to-center spacing fits projects laid out around common European drilling patterns, which is useful on many contemporary kitchen and bath cabinets. Its satin nickel finish suits cabinet runs where a soft metallic tone is preferred over high-gloss hardware, allowing the pull to coordinate with hinges and other fittings in similar finishes. The 6-3/16 inch overall length lets this pull sit comfortably on both standard doors and typical drawer widths, so one model can be used across a bank of units without changing drill patterns. A projection of 1-3/32 inch and a 7/16 inch width give enough depth and profile for everyday gripping on residential cabinetry, while still keeping a low enough stance for tight walkways or narrow galley installations.
The defined 3-3/4 inch (96 mm) center-to-center measurement allows installers to rely on fixed jigs and drilling templates, which supports straight, repeatable hardware lines across multiple fronts. Zinc construction creates a single-piece pull body that feels solid in hand, which can help hardware feel consistent from cabinet to cabinet. The 7/16 inch base diameter at each mounting point gives a predictable footprint against the surface, which helps hide minor drilling breakout around the bore and maintains a clean edge at the contact area. With a 1-3/32 inch projection working together with the 6-3/16 inch overall length, each pull sets out from the face at a uniform depth, maintaining alignment when the same model is used across doors and drawers. The satin nickel finish applied to the zinc substrate produces a uniform surface color, which supports a consistent appearance even when many pulls are installed side by side on large cabinet runs.
The SZTR3-SN pull has a 3-3/4 inch (96 mm) center-to-center size, so hole spacing can follow a standard 96 mm layout often used in cabinet drilling patterns.
This Transitions 2.0 pull has a 6-3/16 inch overall length, giving a longer gripping area that works well on common cabinet doors and medium-width drawers.
The Transitions 2.0 pull projects 1-3/32 inch from the mounting surface, providing finger clearance while keeping the hardware profile relatively low on the cabinet face.
The SZTR3-SN pull is made from zinc with a satin nickel finish, creating a solid metal component with a muted metallic appearance on cabinet fronts.
This pull has a 7/16 inch width and a 7/16 inch base diameter, giving a slim profile while keeping a defined footprint where it meets the cabinet surface.
The satin nickel pull uses 8-32 x 1 inch screws, so mounting holes can be tapped or drilled with that thread and length in mind during cabinet preparation.
The Pro Value Transitions 2.0 SZTR3-SN pull combines a 3-3/4 inch (96 mm) center-to-center layout, 6-3/16 inch overall length, and 1-3/32 inch projection in a zinc body with satin nickel finish. Those defined dimensions and finish give installers a consistent hardware choice for cabinets planned around 96 mm spacing. For cabinet runs that call for a slim 7/16 inch profile and matching 7/16 inch base diameter, this pull provides a clear, repeatable specification that can be applied across doors and drawers in one coordinated series.
Sold In: 1 Each