Pro Value Transitions 2.0 pull is a zinc cabinet handle in the Transitions 2.0 collection with a polished chrome finish, so it delivers a consistent look when you are matching existing decorative hardware across a run of doors and drawers. The 3-3/4 inch (96 mm) center to center dimension sets reliable hole spacing, which matters when you are laying out drilling patterns on new cabinet fronts or aligning to existing bore holes during a door or drawer front replacement. The overall 6-3/16 inch length creates a generous grip zone, helping hands find the pull quickly on wider drawers or taller doors. A projection of 1-3/32 inch spaces the hand away from the cabinet face, which supports comfortable everyday use while maintaining a low-profile appearance on face frames or full-overlay fronts.
The 3-3/4 inch (96 mm) center to center spacing is the key installation dimension, because it dictates where to drill mounting holes and lets you line up this pull with existing 96 mm patterns during replacements. The 6-3/16 inch overall length shows how far the pull will span across a rail or drawer front, which helps you decide placement on narrow or wide faces. A 1-3/32 inch projection defines how far the pull extends from the cabinet surface, which lets you anticipate hand clearance around adjacent doors or nearby walls. The 7/16 inch base diameter and 7/16 inch width describe the contact and visual footprint on the front, which supports planning around edge distances and neighboring hardware.
This Pro Value Series pull is part of the Transitions 2.0 collection, which means it is intended to work within a coordinated decorative hardware family on cabinets and furniture. With its 3-3/4 inch (96 mm) center to center dimension, it suits cabinet doors and drawers drilled on that standard spacing, so it can be used in kitchens, baths, or built-ins that follow the same hole pattern. The polished chrome finish gives it a bright look that visually aligns with other polished chrome hardware, such as cabinet hinges or room fixtures, which helps keep a consistent appearance throughout a project. The 6-3/16 inch overall length allows the pull to sit comfortably on medium to larger fronts, which supports use on drawer banks or tall pantry doors that benefit from a longer gripping surface. Because the material is zinc, the pull offers a metal feel that pairs well with other metal hardware components in woodworking installations.
The 3-3/4 inch (96 mm) center to center spacing on this SZTR3-PC pull supports repeatable drilling, because once that pattern is set, each additional front can be bored using the same layout without adjustment. The 1-3/32 inch projection from the door or drawer front helps keep hands away from the surface, which can reduce knuckle contact with the cabinet face during frequent use. A 7/16 inch base diameter gives a predictable bearing surface around each mounting point, which can help visually cover typical drilled hole margins on wood, laminate, or painted fronts. The 7/16 inch width of the pull provides a slim gripping edge, which can feel straightforward to grasp without adding bulk that might interfere with adjacent hardware on narrow stiles. The 6-3/16 inch length provides a consistent visual line when multiple pulls are used in sequence, which helps runs of cabinets look aligned and intentional.
The Pro Value Transitions 2.0 pull has a 3-3/4 inch (96 mm) center to center spacing, 6-3/16 inch overall length, 1-3/32 inch projection, 7/16 inch base diameter, and 7/16 inch width for planning layout.
The 3-3/4 inch (96 mm) center to center spacing matches a common drilling pattern, so it aligns with standard boring jigs and existing 96 mm holes during cabinet door or drawer updates.
The pull is made from zinc, providing a metal handle body that suits decorative hardware applications on cabinets and furniture using metal pulls.
The SZTR3-PC pull has a polished chrome finish, giving a bright reflective appearance that coordinates with other polished chrome cabinet hardware and fixtures.
The Pro Value Transitions 2.0 pull projects 1-3/32 inch from the cabinet surface, providing hand clearance while maintaining a relatively low profile on the door or drawer front.
The 7/16 inch base diameter defines the contact area at each mounting point, helping visually cover the drilled hole edges on cabinet doors and drawer fronts.
The Pro Value Transitions 2.0 pull from the Transitions 2.0 collection, with its 3-3/4 inch (96 mm) center to center spacing, polished chrome finish, and 6-3/16 inch overall length, is sized for cabinets drilled on the 96 mm pattern. The zinc construction, 1-3/32 inch projection, 7/16 inch base diameter, and 7/16 inch width define how it will sit and feel on your doors and drawers. Choose this SZTR3-PC cabinet pull when your cabinet layout and design match these dimensions and polished chrome appearance.
Sold In: 1 Each