Pro Value Transitions 2.0 pull gives you a 3-3/4 inch (96 mm) center to center layout, so hole spacing lines up with common cabinet drilling and helps streamline change-outs or new runs. The 4-1/8 inch overall length provides enough hand contact for drawers and doors without crowding adjacent hardware on tight cabinet faces. Oil rubbed bronze finish delivers a dark, traditional look that ties in with matching decorative hardware across a project. Zinc material construction creates a solid-feeling pull that suits everyday cabinet use in kitchens, baths, and built-ins. The 3/8 inch width keeps the profile visually light while still giving a clear edge for fingers to grab. A 1-3/8 inch projection stands the pull off the face of the door or drawer, providing working clearance for fingers when opening while keeping the pull close enough to the front for a neat, compact appearance.
This Pro Value Series Transitions 2.0 pull uses a 3-3/4 inch (96 mm) center to center dimension, so drilling is based on a straightforward, widely used spacing that suits many cabinet layouts. The 4-1/8 inch length gives a clear visual reference when laying out pulls along rails and drawer fronts. With a 1-3/8 inch projection and 3/8 inch width, the pull creates a defined handhold that stands off from the face without adding bulk, which is helpful when working near face frame edges or appliance panels. The oil rubbed bronze finish and zinc construction work together so the pull delivers a consistent appearance across multiple cabinets while offering a solid feel when fastened in place.
This Pro Value Transitions 2.0 pull in oil rubbed bronze works on cabinet doors and drawers where a 3-3/4 inch (96 mm) center to center layout is desired. The size and 4-1/8 inch length suit standard base and wall cabinets in kitchens, offering enough grip for heavier pot-and-pan drawers as well as lighter upper doors. In baths, the compact width of 3/8 inch helps the pull sit neatly on narrower drawer fronts and door rails. The 1-3/8 inch projection supports use on built-ins and storage cabinets by giving room for fingers to reach behind the pull. Oil rubbed bronze finish ties in with other oil rubbed bronze decorative hardware, which is useful when coordinating hinges, knobs, and bath fittings around a single color story.
The 3-3/4 inch (96 mm) center to center spacing on this Pro Value Series pull supports consistent drilling across a whole job, because the measurement repeats cleanly on cabinet doors and drawers in a run. With an overall length of 4-1/8 inch, the ends of the pull extend beyond the mounting points, giving an easy visual check when aligning pulls to stiles or rails. The 1-3/8 inch projection and 3/8 inch width define a predictable handhold, which matters when setting hardware height to clear countertop edges or nearby trim. Zinc material keeps the pull body rigid once mounted, so alignment stays true across multiple cabinets. The oil rubbed bronze finish maintains a uniform tone from pull to pull, helping long cabinet runs read as one coordinated installation.
The Pro Value Transitions 2.0 pull has a 3-3/4 inch (96 mm) center to center dimension, which matches a common drilling pattern for cabinet doors and drawers.
The pull measures 4-1/8 inch in overall length, so it slightly overhangs the mounting holes and provides additional gripping area on cabinet fronts.
This Transitions 2.0 pull has a 1-3/8 inch projection, creating space between the pull and cabinet surface for fingers to grip comfortably.
The pull is 3/8 inch wide, which keeps the profile slim on the cabinet face while still giving a defined edge for fingers.
The SZTR4-ORB pull is made from zinc, providing a solid-feeling handle suitable for regular cabinet door and drawer use.
This Pro Value Series Transitions 2.0 pull has an oil rubbed bronze finish, giving a dark, traditional look that coordinates with similar decorative hardware.
The Pro Value Transitions 2.0 pull with 3-3/4 inch (96 mm) center to center spacing, 4-1/8 inch length, and 1-3/8 inch projection offers a straightforward match for many cabinet drilling patterns. Zinc construction and a 3/8 inch wide profile deliver a solid yet streamlined handle across kitchen, bath, and built-in cabinets. The oil rubbed bronze finish aligns with projects built around that dark tone. For work that specifies this size and appearance, this SZTR4-ORB pull from Wurth Baer Supply fits neatly into cabinet hardware layouts.
Sold In: 1 Each