Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Transitions 2.0 96mm satin nickel pull is a zinc cabinet pull from the Pro Value Transitions II Series, so it provides a defined style reference for matching across a project. The satin nickel finish controls glare on door and drawer fronts, which helps hardware blend with other satin nickel components in the space. A center to center dimension of 3-3/4 inches, or 96 mm, aligns with a common drilling pattern, which supports straightforward layout on new work or when matching existing boring. The overall length of 4-7/32 inches gives fingers a bit of clearance beyond the screw centers, which helps with grip on wider drawer fronts. A projection of 1-3/16 inches sets the handle off the face of the cabinet, which creates enough space for a comfortable grasp without reaching too far past the door plane.
The 3-3/4 inch center to center drilling dimension sets the mounting hole spacing, which directs where to bore or reuse holes on cabinet faces. With a 4-7/32 inch length, the pull extends just beyond that spacing, which keeps the ends close to the screw locations for a compact look. The 1-3/16 inch projection determines how far the gripping surface stands off the cabinet, which allows fingers to wrap the pull without contacting the door or drawer face. A 15/32 inch base diameter defines the footprint at each contact point, which concentrates the visual mass at the mounting area for a clean outline on the front. The same 15/32 inch width carries through the bar, which maintains a slim profile while still presenting a defined edge to grab.
This Pro Value Transitions II Series pull functions as a handle for cabinet doors and drawers, so it fits naturally into decorative hardware layouts in kitchens, baths, and similar casework. The 3-3/4 inch, 96 mm center to center measurement aligns with a standard cabinet drilling pattern, which helps when placing multiple pulls in a straight visual line across a bank of doors. Because the pull length is 4-7/32 inches, the handle stays compact relative to the boring, which suits both narrow doors and typical drawer fronts without overwhelming the face. The 1-3/16 inch projection sets a consistent standoff, which keeps the grip position in a predictable zone across all fronts using this model. With a satin nickel finish over zinc, the pull presents a muted metallic tone, which coordinates with other satin nickel decorative elements in the same area.
The fixed 96 mm center to center spacing on this Transitions 2.0 pull defines a reliable drilling template, which supports accurate hole placement when repeating the pull across multiple cabinets. A 15/32 inch base diameter at each end identifies how much flat surface is required around the mounting point, which helps align the pull consistently relative to door or drawer edges. The 15/32 inch width keeps the bar slim from front view, which makes it simpler to align visually with rails and stiles when laying out several pulls in a row. The 1-3/16 inch projection sets a uniform stand-off distance, which keeps fingertip clearance the same from cabinet to cabinet and helps avoid interference between adjacent doors when they swing past each other. The satin nickel finish on the zinc body also defines the surface texture, which provides a steady feel under hand during frequent daily use.
The SZTR5-SN pull has 3-3/4 inch, 96 mm center to center spacing, a 4-7/32 inch overall length, 1-3/16 inch projection, and 15/32 inch width, which together define its footprint and hand clearance on cabinet fronts.
The 96 mm center to center spacing matches a common drilling pattern, which supports consistent hole placement across multiple doors and drawers during cabinet hardware layout.
This Pro Value Series Transitions 2.0 pull is made from zinc, which provides a solid metal body where hands contact the hardware during regular cabinet operation.
The 1-3/16 inch projection sets the pull forward from the cabinet face, which provides functional finger clearance when gripping doors or drawers.
The satin nickel finish creates a controlled sheen on the pull surface, which helps it visually coordinate with other satin nickel cabinet hardware in the same installation.
The 15/32 inch base diameter defines the contact area at each mounting point, which helps position the pull neatly on the flat portions of door and drawer fronts.
The Pro Value Transitions II Series SZTR5-SN satin nickel pull combines a 3-3/4 inch, 96 mm center to center layout with a 4-7/32 inch overall length, so it suits standard cabinet boring while keeping a compact footprint. A 1-3/16 inch projection and 15/32 inch width set a predictable hand clearance and slim profile, which fits both doors and drawers without dominating the face. With a zinc body and satin nickel finish, the pull aligns with the Transitions 2.0 collection, so it supports a consistent hardware look across connected cabinet runs on your next project.
Sold In: 1 Each