Pro Value Transitions 2.0 pull gives you a 3-3/4 inch (96 mm) center to center layout, which lines up with common cabinet drilling patterns so replacements and new installs follow standard boring setups. The pull is part of the Transitions 2.0 collection from the Pro Value Series, so multiple locations in the same space can share a consistent style and dimension set. Its oil rubbed bronze finish defines the visual tone of the hardware, which helps match other bronze elements on cabinets and furniture in the same project. The body is made from zinc, which provides a solid metal construction for everyday cabinet and drawer use. Overall length of 4-7/32 inches sets the hand grip span, which affects how the pull feels under load when opening heavier doors and drawers.
The 96 mm center to center measurement defines the distance between mounting points, which sets the drilling pattern when laying out new doors or aligning to existing bores. Screw size 8-32 x 1 inch specifies the thread and length typically used with this pull, which ties directly to how it fastens into standard cabinet door or drawer fronts of typical thickness. The 1-3/16 inch projection indicates the standoff from the surface, which impacts how fingers clear raised panels or overlapping edges during operation. A 15/32 inch base diameter and matching 15/32 inch width create a compact footprint, which is helpful when hardware needs to sit on narrow rails or small drawer fronts without crowding edges.
The 3-3/4 inch (96 mm) center to center layout positions this pull for cabinets and drawers that follow common drilling standards, which is useful in kitchen, bath, and shop casework using that pattern. The oil rubbed bronze finish means this pull visually coordinates with other bronze-toned components, which helps keep hardware consistent across door and drawer faces in the same run. Zinc construction gives the pull a solid metal body, which suits everyday opening and closing cycles on frequently used cabinet fronts. The 4-7/32 inch overall length provides enough span to sit proportionally on medium-width drawer fronts, which keeps the pull from looking undersized on typical residential cabinet layouts. With a 15/32 inch width, the pull keeps a slim face profile, which fits well on face frames or frameless fronts where a lower visual mass is preferred.
The Transitions 2.0 collection designation ties this pull to a defined family, which helps maintain uniform sizing and style when multiple cabinets need matching hardware. The 96 mm center to center measurement offers a clear drilling value, which simplifies jig setup and repeat drilling across a bank of doors or drawers. A projection of 1-3/16 inches sets a repeatable clearance off the surface, which reduces variation when aligning multiple pulls along a line of cabinets. The 15/32 inch base diameter provides a predictable footprint at each mounting point, which helps align pulls straight and parallel to door or drawer edges. Screw size 8-32 x 1 inch connects the pull to a commonly used machine screw size, which supports consistent fastening torque and grip into prepared cabinet fronts.
The pull has a 3-3/4 inch (96 mm) center to center, 4-7/32 inch overall length, 1-3/16 inch projection, 15/32 inch base diameter, and 15/32 inch width, which together define its fit on cabinet faces.
The Pro Value Transitions 2.0 pull is made from zinc, which provides a solid metal body for regular cabinet and drawer use in residential or shop environments.
This cabinet pull uses an oil rubbed bronze finish, which matches bronze-toned hardware schemes and helps keep cabinet and drawer fronts visually coordinated.
The 96 mm center to center spacing aligns with a common drilling pattern, which supports straightforward layout on new fronts and fits many existing 96 mm hole patterns.
This pull uses 8-32 x 1 inch screws, which matches a standard cabinet hardware thread and length for fastening through typical door and drawer front thicknesses.
The pull is from the Transitions 2.0 collection within the Pro Value Series, which groups it with hardware sharing similar style and sizing.
The Pro Value Transitions 2.0 pull with 3-3/4 inch (96 mm) center to center and 4-7/32 inch length brings a defined set of working dimensions to cabinet layouts, which supports predictable drilling and alignment during installation. Its zinc construction and oil rubbed bronze finish combine metal strength with a coordinated bronze appearance, which helps match existing cabinet hardware schemes. With 1-3/16 inch projection and 15/32 inch base diameter, the pull maintains consistent clearance and footprint across doors and drawers, which is important when repeating hardware across a full room of cabinetry.
Sold In: 1 Each