Polished Chrome Cabinet Pull 96mm describes a Pro Value Transitions Series pull with a center to center measurement of 3-3/4 inches (96 mm), so hole spacing lines up with standard cabinet drilling and speeds straightforward replacement work. The pull length of 4-7/32 inches creates comfortable grip room while still fitting typical cabinet and drawer fronts without crowding neighboring hardware. A projection of 1-3/16 inches stands the pull off the face enough for solid finger clearance, which helps when operating heavier drawers or doors. The 15/32 inch width keeps the profile slim, supporting a clean look across banks of fronts. A polished chrome finish gives a bright, reflective surface that matches other chrome decorative hardware. The zinc material provides a sturdy base for the finish, supporting everyday cabinet use in kitchens, baths, and shop-built storage.
The center to center measurement of 3-3/4 inches (96 mm) establishes fixed hole spacing for this Pro Value Series pull, so drilling layouts can be repeated accurately with jigs or templates on cabinet doors and drawers. A base diameter of 15/32 inch defines the footprint around each mounting point, which matters when positioning the pull on narrower rails or stile faces where edge distance is tight. The pull mounts using 8-32 x 1 inch screws, a common cabinet hardware thread and length that suits standard door and drawer thicknesses, helping installers work within familiar fastening practice. The 1-3/16 inch projection keeps the working grip away from the surface while staying shallow enough for doors that need to clear adjacent cabinetry or obstacles.
The Pro Value Transitions 2.0 pull with a 3-3/4 inch (96 mm) center to center layout fits cabinets and drawers drilled for this common spacing, which benefits retrofit work and new cabinet runs using standard boring patterns. Its 4-7/32 inch length suits doors and drawers from small bath cabinets to wider kitchen fronts, so one style can be carried through a project for visual consistency. A projection of 1-3/16 inches gives enough space for fingers behind the pull, which helps when fronts sit flush against appliances or walls where additional clearance is limited. The 15/32 inch width and base diameter keep the pull proportioned for narrow rails on upper cabinets as well as broader drawer faces, supporting flexible placement across varied cabinet sizes. With a polished chrome finish, this pull pairs with chrome faucets, hinges, and other decorative hardware, tying different elements together on kitchens, vanities, and shop-built storage.
The 96 mm center to center dimension works with common cabinet drilling setups, which streamlines repetitive boring when producing multiple fronts or full kitchens. Matching 15/32 inch base diameters at each mounting point help installers align pulls visually along a rail, because the contact circles remain uniform from door to door. The 1-3/16 inch projection fixes how far the pull stands off the surface, so clearances can be planned around backsplash, adjacent cabinets, or tall appliance panels without guesswork. Zinc construction gives the pull a consistent weight and feel, helping rows of doors and drawers operate with similar hand contact across an installation. The polished chrome finish provides a smooth surface that reflects light along the face of a run, which can emphasize straight lines and accurate alignment when pulls are laid out carefully. Using the 8-32 x 1 inch screw size across all mounting points keeps hardware threading consistent, supporting quicker installation with a single driver setup on site.
The Pro Value Transitions 2.0 SZTR5-PC pull has a 3-3/4 inch (96 mm) center to center size, so hole spacing matches common cabinet drilling patterns for handles in this length range.
The Pro Value Transitions 2.0 pull measures 4-7/32 inches in overall length, giving enough bar length for a solid grip while staying proportional to standard cabinet and drawer fronts.
The polished chrome cabinet pull projects 1-3/16 inches from the surface, which creates usable finger clearance for opening doors and drawers without crowding tight spaces.
The SZTR5-PC cabinet pull is made from zinc with a polished chrome finish, combining a solid base material with a bright metallic surface suited to matching chrome hardware.
The 3-3/4 inch cabinet pull uses 8-32 x 1 inch screws, aligning with standard cabinet hardware threads and lengths used on many doors and drawer fronts.
The Pro Value Series pull has a 15/32 inch base diameter and 15/32 inch width, creating a compact footprint that suits narrow rails and maintains a clean, scaled look.
The Pro Value Series Transitions 2.0 SZTR5-PC pull delivers a 3-3/4 inch (96 mm) center to center layout, 4-7/32 inch length, and 1-3/16 inch projection that support repeatable cabinet drilling and everyday use. Zinc construction with a polished chrome finish ties into standard decorative hardware lines from Wurth Baer Supply, helping projects carry one coordinated pull style across doors and drawers. Put this 96 mm cabinet pull to work anywhere a bright chrome handle and standard drilling pattern fit the job.
Sold In: 1 Each