Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Transitions II pull is a satin nickel cabinet pull designed for projects needing a 3-3/4 inch (96 mm) center to center drill pattern, so it drops into standard 96 mm layouts without changing boring jigs. The pull measures 4-3/16 inch in overall length, giving a bit of overhang beyond the hole centers for a balanced look on doors and drawers. Its 1/2 inch width creates a slim profile that clears adjacent fronts while still giving fingers a defined edge to grab. A 1-3/16 inch projection stands the pull off the face, providing knuckle clearance in tight cabinet runs. The pull is made from zinc with a satin nickel finish, so it delivers the Transitions 2.0 collection appearance in a consistent color tone across multiple cabinets. The SZTR6-SN part number identifies this specific combination of size, material, and finish for repeat orders.
This Pro Value Series cabinet pull uses a 3-3/4 inch (96 mm) center to center spacing, so once holes are drilled on that layout, the pull aligns directly to the front without extra measurement. The 13/16 inch base diameter at each mounting point helps cover the immediate area around the bore, which can be important when drilling through finished cabinet faces. With a 4-3/16 inch overall length, the pull extends past the hole centers on both sides, giving visual coverage that suits standard cabinet rail widths. The 1-3/16 inch projection defines the stand-off from the front, so doors can open without fingers scraping the surface. A 1/2 inch width keeps the pull narrow enough that it can be used on smaller drawers while still matching wider fronts in the same run.
The 96 mm center to center spacing on this satin nickel cabinet pull aligns with a widely used 3-3/4 inch drilling pattern, so it suits new cabinet builds that follow standard boring jigs. On replacements where an existing pull already uses 3-3/4 inch centers, the SZTR6-SN part allows the installer to remove the old pull and position this Transitions 2.0 pull onto the same holes. The 13/16 inch base diameter at each end gives a defined bearing surface against the cabinet, covering the drilled zone around the screw hole and contributing to a finished look on both doors and drawers. Because the pull body measures 4-3/16 inch in total length, it extends slightly beyond the mounting points, framing the hole pattern and helping the pull appear centered on typical cabinet rail sections. The Pro Value Series branding ties this pull into a recognizable line, which can help when matching it to other Pro Value Transitions 2.0 pieces specified on the same job.
The 1-3/16 inch projection of this Transitions 2.0 satin nickel pull provides clearance between the hand and the cabinet face, which is useful on doors that are opened many times a day. A 1/2 inch width keeps the gripping area compact, so the pull does not dominate narrower drawer fronts while still providing an edge for fingertips when pulling. The zinc construction gives the pull its metal structure, supporting the way it transfers load from the hand through the mounting points into the cabinet front. With a satin nickel finish, the pull presents a soft metallic sheen that coordinates well with other satin nickel hardware in the same room, helping maintain a consistent appearance across multiple cabinets. The SZTR6-SN manufacturer part number and the TRANS 2.0 PULL 96MM CC SATIN NICKEL description provide a precise reference when ordering identical pulls for future additions or replacements on a project.
The Pro Value Transitions II pull has a 3-3/4 inch (96 mm) center to center dimension, so it matches standard 96 mm drilling patterns on cabinet doors and drawers.
The SZTR6-SN pull measures 4-3/16 inch in overall length, giving a slight extension beyond the mounting holes for a balanced look on typical cabinet faces.
This Transitions 2.0 pull is made from zinc with a satin nickel finish, combining a metal body with a soft metallic appearance that coordinates with satin nickel hardware.
The Pro Value Series cabinet pull has a 1-3/16 inch projection, setting the grip off the cabinet face to provide finger and knuckle clearance when opening doors and drawers.
The satin nickel cabinet pull has a 1/2 inch width and a 13/16 inch base diameter, giving a slim grip with mounting bases that cover the drilled area around each hole.
The SZTR6-SN pull is part of the Transitions 2.0 collection in the Pro Value Series, allowing coordinated use with other pieces from the same collection.
This 3-3/4 inch (96 mm) center to center satin nickel pull from the Transitions 2.0 collection gives you a defined set of working dimensions: 4-3/16 inch overall length, 1-3/16 inch projection, 1/2 inch width, and 13/16 inch base diameter. The zinc construction and satin nickel finish deliver a Pro Value Series look that coordinates across multiple cabinets. When a project calls for a 96 mm center to center pull with these measurements, select the SZTR6-SN part number to match this specific Pro Value Transitions II pull.
Sold In: 1 Each