Pro Value Transitions 2.0 pull identifies this handle as part of the Transitions 2.0 collection, which keeps cabinet and drawer fronts visually consistent when multiple pulls are used on a project. The zinc material gives the pull a solid metal construction that stands up to everyday cabinet and drawer use in kitchens, baths, and shop storage. The oil rubbed bronze finish provides a dark, traditional look that pairs with commonly used bronze hinges and visible decorative hardware on casework. A 3-3/4 inch, or 96 mm, center to center dimension sets the exact spacing between mounting holes, which matches many standard cabinet drilling patterns for straightforward layout on new doors or drawer fronts. The 4-3/16 inch overall length gives installers enough bar to grip while still fitting comfortably on narrower rails and drawer faces.
The 96 mm center to center dimension on this pull gives installers a fixed hole spacing to work with when boring new cabinet doors or drawer fronts. The 8-32 x 1 inch screw size matches the threaded insert in the pull, so installers can pair it with appropriately threaded fasteners for the door or drawer material thickness being used. The 4-3/16 inch overall length and 1-3/16 inch projection define the pull envelope, which helps in checking that stacked drawers, adjacent doors, and nearby trim all clear the handle during daily operation. The 13/16 inch base diameter at each end sets how much surface area the feet cover, which is useful when the pull is used to cover previous handle locations on refacing or retrofit work.
The 3-3/4 inch, or 96 mm, center to center size places this pull in a common cabinet drilling standard, which suits many kitchen, bath, and built-in storage layouts using that hole spacing. The 4-3/16 inch overall length works well on medium-width cabinet doors and most standard drawers, giving a comfortable grasp without overwhelming narrower fronts. A 1-3/16 inch projection sets a moderate stand-off from the door or drawer face, which provides enough finger room while staying close enough to avoid frequent contact with surrounding obstacles. The 1/2 inch width produces a bar thickness that feels substantial in the hand relative to its compact length, which matters on frequently used doors near sinks or work areas. The 13/16 inch base diameter at each mounting point creates a round footprint that visually anchors the handle on flat panels and rail-and-stile doors.
The 96 mm center to center spacing on this zinc cabinet pull allows installers to reuse existing 96 mm boring patterns or drilling jigs, which speeds layout when running multiple doors and drawers on a job. The consistent 4-3/16 inch overall length provides a predictable edge clearance reference, which simplifies setting uniform offsets from door edges during installation. A 1-3/16 inch projection helps keep hand clearance consistent across a run of cabinets, which supports smooth door and drawer operation when fronts are closely spaced. The 1/2 inch width and 13/16 inch base diameter give defined reference edges that work well with layout marks, which helps align the pull square to door rails and drawer tops. The oil rubbed bronze finish ties the handle to other bronze cabinet elements, which supports a coordinated appearance across hinges, knobs, and companion pulls from the same aesthetic group.
The Pro Value Transitions 2.0 pull has a 3-3/4 inch, or 96 mm, center to center dimension, which sets the exact hole spacing when drilling cabinet doors and drawer fronts.
The SZTR6-ORB cabinet handle measures 4-3/16 inches in overall length, which defines the footprint on the door or drawer and helps verify fit on narrower fronts.
The Transitions 2.0 pull is made from zinc, which provides a metal body suited to regular opening and closing of cabinet doors and drawers.
This cabinet pull has an oil rubbed bronze finish, which delivers a dark bronze appearance that coordinates with other bronze decorative hardware.
The pull projects 1-3/16 inches from the mounting surface, which provides finger clearance for gripping doors and drawers.
This 96 mm center to center pull is designed for 8-32 x 1 inch screw threads, which defines the fastener type used to secure it to door or drawer fronts.
The 3-3/4 inch (96 mm) center to center spacing on this Pro Value Transitions 2.0 pull aligns with a common cabinet hardware standard, which suits both new installations and replacements that share this drilling pattern. The zinc construction and oil rubbed bronze finish define the pull as a metal handle with a traditional bronze look, which works alongside matching decorative hardware in the same space. The 4-3/16 inch length, 1-3/16 inch projection, 1/2 inch width, and 13/16 inch base diameter give clear dimensional references for planning layout across doors and drawers. For cabinet projects built around a 96 mm pattern and an oil rubbed bronze appearance, this SZTR6-ORB pull offers defined measurements that support consistent installation.
Sold In: 1 Each