Pro Value Transitions 2.0 pull gives you a 3-3/4 inch (96 mm) center to center handle that sets consistent spacing across doors and drawers, which helps align drilling layouts on cabinet runs. The polished chrome finish on this pull provides a bright, reflective look that coordinates with other polished chrome decorative hardware in a project. Its zinc material supplies a solid metal feel while still being workable in typical cabinet shop operations. With an overall length of 4-3/16 inches, this handle offers enough grip area for everyday use without crowding neighboring hardware on narrower fronts. A projection of 1-3/16 inches stands the pull off the face of the cabinet, leaving finger clearance for opening doors and drawers. The 1/2 inch width presents a slim, modern profile that suits many residential and light commercial cabinet styles.
This SZTR6-PC cabinet pull uses a 3-3/4 inch (96 mm) center to center mounting pattern, so both attachment points align to that fixed distance for straightforward drilling. The pull is designed with a base diameter of 13/16 inch at each mounting foot, giving a defined contact area against the cabinet face that helps cover the drilled hole perimeter. An 8-32 x 1 inch screw size is specified for fastening the pull through typical cabinet doors and drawer fronts, matching common threaded inserts in decorative hardware. The 1-3/16 inch projection works with this mounting setup to position the gripping surface away from the panel while keeping the load close to the mounting points. Together, these details support repeatable installation across a run of cabinets using standard drilling patterns.
This 3-3/4 inch (96 mm) center to center cabinet pull from the Transitions 2.0 collection fits doors and drawers designed around that widely used drilling pattern, so it suits many kitchen, bath, and storage layouts built on 96 mm hardware spacing. The polished chrome finish matches projects that specify polished chrome decorative hardware, helping maintain a unified look across handles and other metal components. With a length of 4-3/16 inches, this pull works well on standard cabinet widths where a mid-size handle is preferred, avoiding overhang on narrow fronts while still giving usable grip length on larger doors. The 1/2 inch width and 1-3/16 inch projection allow this handle to function on face frame or frameless cabinets by keeping the pull close to the surface yet clear enough for comfortable use. The 13/16 inch base diameter at each end provides footing for the pull on flat cabinet faces, supporting a neat transition from cabinet surface to hardware.
The fixed 3-3/4 inch (96 mm) center to center spacing on this Pro Value Transitions 2.0 pull supports consistent results because installers can rely on common drilling jigs set to that dimension, reducing layout variation from cabinet to cabinet. The specified 8-32 x 1 inch screw size coordinates with the pull's design so the threaded connection passes cleanly through typical door and drawer thicknesses used in many cabinet constructions. Its 1-3/16 inch projection keeps the hand grip far enough from the cabinet face to avoid knuckle contact while still keeping leverage close to the fastening points, which helps handle normal opening forces. The 4-3/16 inch length paired with 1/2 inch width produces a proportion that seats comfortably in the hand, aiding controlled opening and closing motions on heavier drawers or full-height doors. The zinc material beneath the polished chrome finish gives the pull a solid structure, supporting everyday operation on frequently used cabinetry in residential or shop-built installations.
This SZTR6-PC pull has a 3-3/4 inch (96 mm) center to center size, which matches common cabinet drilling layouts and helps standardize hole spacing across multiple fronts.
This cabinet pull provides a 4-3/16 inch overall length, 1-3/16 inch projection, and 1/2 inch width, giving a mid-size handle with comfortable finger clearance from the cabinet surface.
This pull uses zinc as the material with a polished chrome finish, creating a solid metal handle with a bright, reflective surface that coordinates with polished chrome hardware.
This Pro Value Transitions 2.0 pull is specified for 8-32 x 1 inch screws, aligning with standard cabinet hardware threading for through-bored door and drawer fronts.
Each mounting base on this pull has a 13/16 inch diameter, creating a defined contact area against the cabinet face that helps neatly frame the drilled hole.
This polished chrome cabinet pull suits projects using 3-3/4 inch (96 mm) center to center hardware where a zinc pull with a polished chrome finish is specified.
This Pro Value Series Transitions 2.0 pull brings a 3-3/4 inch (96 mm) center to center layout, polished chrome finish, and zinc construction together in one mid-size handle. For projects built around 96 mm drilling patterns and polished chrome decorative hardware, these verified dimensions and materials support consistent installation and a coordinated appearance across doors and drawers. Select this SZTR6-PC cabinet pull when a 4-3/16 inch length, 1-3/16 inch projection, and 1/2 inch width align with your cabinet front sizes and design intent.
Sold In: 1 Each