Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Transitions 2.0 96mm satin nickel pull from the Pro Value Series is a zinc cabinet handle designed as a 3-3/4 inch (96 mm) center to center pull. This mounting dimension lines up with standard drilling for many cabinet and drawer fronts, helping maintain consistent layouts across a run of doors and banks of drawers. The satin nickel finish provides a muted metallic look that works in a range of shop-built or retrofit projects where a contemporary but not high-gloss tone is preferred. The 4-5/16 inch overall length gives enough hand contact for functional grip on doors or wider drawers, while staying proportional on smaller fronts. A base diameter of 1/2 inch creates a compact footprint at each mounting point, which helps when working near panel edges or narrow rails.
The 3-3/4 inch (96 mm) center to center measurement on this Pro Value Series Transitions 2.0 pull defines the exact distance between mounting holes, so boring patterns can be standardized across door and drawer fronts. With a 4-5/16 inch overall length, the pull extends slightly beyond the hole spacing, giving a defined grip area at the ends without crowding the panel. The 31/32 inch projection indicates how far the handle stands off the surface, which affects finger clearance and helps users comfortably grasp the pull from different angles. A 9/16 inch width keeps the front profile narrow, supporting a streamlined look across banks of fronts. The 1/2 inch base diameter at each end concentrates the contact area, which can be useful when positioning pulls near stile edges or glass inserts.
This Pro Value Transitions II cabinet pull, with its 3-3/4 inch (96 mm) center to center dimension, suits runs of cabinet doors where uniform hardware spacing is critical for visual alignment. The 4-5/16 inch overall length helps it look proportional on both upper wall cabinets and base cabinets, so installers can carry one model through a full kitchen or shop project. On drawer fronts, the 31/32 inch projection allows fingers to wrap comfortably behind the pull, supporting confident opening even on heavier drawers. The satin nickel finish plays well in projects that pair nickel-toned hinges and other visible hardware, maintaining a consistent metal color story throughout the install. With a 9/16 inch width and 1/2 inch base diameter, the pull fits cleanly on narrower rails or shaker-style frames without visually overwhelming the panel layout.
The fixed 96 mm center to center spacing lets fabricators set up drilling jigs once and repeat the same pattern across multiple fronts, which supports accurate hardware alignment over long cabinet runs. Because the pull length is 4-5/16 inch, there is a clear visual margin from the mounting holes to each end, giving installers a predictable reveal that reads consistent from door to door. The 31/32 inch projection creates a reliable stand-off distance from the face, limiting the chance of knuckles hitting the panel while still keeping the hardware low-profile for tight galley layouts. The 9/16 inch width ensures the pull does not dominate narrow drawer fronts, helping maintain balanced proportions in smaller cabinet modules. With a 1/2 inch base diameter, each contact point is clearly defined, which can simplify layout when aligning pulls relative to rail edges or panel reveals.
The SZTR7-SN pull has a 3-3/4 inch (96 mm) center to center size, which sets the hole spacing and supports consistent drilling patterns on cabinet doors and drawers.
The Transitions 2.0 satin nickel pull has a 4-5/16 inch overall length, providing a defined grip area while staying proportional on standard cabinet and drawer fronts.
The Transitions 2.0 pull projects 31/32 inch from the surface, which provides finger clearance for a comfortable grip without extending excessively into the workspace.
This Pro Value Series pull is made from zinc with a satin nickel finish, giving a solid feel with a muted metallic appearance for cabinet and drawer applications.
The SZTR7-SN handle has a 9/16 inch width, creating a slim profile that suits clean-lined cabinet designs and closely spaced hardware layouts.
Each end of this satin nickel pull has a 1/2 inch base diameter, defining a compact footprint that can sit comfortably on narrow rails or stile edges.
The Pro Value Series Transitions 2.0 3-3/4 inch (96 mm) center to center satin nickel pull brings together zinc construction, a 4-5/16 inch overall length, and a 31/32 inch projection to support consistent, repeatable cabinet layouts. The 9/16 inch width and 1/2 inch base diameter help this pull fit cleanly on a variety of door and drawer designs without crowding the face. For projects where a satin nickel finish and 96 mm drilling pattern are part of the hardware plan, this SZTR7-SN pull offers the defined dimensions needed for orderly, aligned installations.
Sold In: 1 Each