Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Transitions 2.0 pull gives you a 3-3/4 inch (96 mm) center to center cabinet handle that lines up with a common drilling pattern, which helps simplify layout when you are working across multiple doors and drawers. The pull is made from zinc, so the body provides a solid metal feel while staying easy to handle during a long run of installations. Its oil rubbed bronze finish delivers a dark, traditional look that works well when you want consistent color across a full kitchen or bath job. Overall length is 4-5/16 inches, giving extra grip area beyond the mounting points, which helps when clients prefer a comfortable handful on wider drawers. Projection is 31/32 inch from the mounting surface, so doors and drawer fronts have enough finger clearance for everyday use.
This 96 mm center to center pull is designed around a 3-3/4 inch spacing, so it suits layouts using that specific drilling distance without altering existing hole locations. The pull uses 8-32 x 1 inch screws, which matches a common cabinet screw thread and length, so fastening into typical cabinet door and drawer materials aligns with standard shop practices. With a base diameter of 1/2 inch at each end, the contact area around each hole is defined, which supports clean seating against the surface once the screws are tightened. Projection of 31/32 inch and width of 9/16 inch create a predictable profile, which assists when checking that adjacent fronts have consistent reveals and that handles clear nearby edges and trim.
This Pro Value Series pull from the Transitions 2.0 collection is suited to cabinet doors and drawers that use a 3-3/4 inch (96 mm) center to center boring, which is common in many kitchen and bath layouts. The oil rubbed bronze finish lets it tie into jobs where hinges, faucets, or lighting also use bronze tones, so visual coordination across the room stays consistent. With an overall length of 4-5/16 inches, the handle spans enough of the front to feel substantial on medium-width fronts, which is helpful on both base cabinets and upper doors. The 31/32 inch projection gives users enough space behind the pull for their fingers, which matters on thicker drawer fronts and applied panels where shallow pulls can feel cramped in daily use.
The 3-3/4 inch (96 mm) center to center measurement works with standard jigs and boring templates, which helps installers keep handles aligned in long runs of cabinetry. Zinc construction provides a stable, uniform body that behaves predictably when tightening the 8-32 x 1 inch screws, which supports even clamping against painted or stained fronts. The 1/2 inch base diameter at each mounting point creates a defined bearing surface, so each end of the pull seats neatly over the drilled hole and helps mask minor chipping at the edge. Width of 9/16 inch and projection of 31/32 inch set a repeatable profile across every door and drawer, which makes sightlines look straight when cabinets are closed and simplifies quality checks at handoff.
The Pro Value Transitions 2.0 pull has a 3-3/4 inch (96 mm) center to center spacing, which matches a common cabinet drilling pattern used on many doors and drawers.
The pull length is 4-5/16 inches, providing extra handle surface beyond the mounting holes for a comfortable grip on both doors and drawers.
The pull is made from zinc with an oil rubbed bronze finish, which supplies a metal feel with a dark, traditional appearance for coordinated cabinet projects.
The pull projects 31/32 inch from the cabinet surface and is 9/16 inch wide, creating a compact profile with enough clearance for everyday gripping.
The SZTR7-ORB pull uses 8-32 x 1 inch screws, aligning with a standard cabinet hardware thread and length for fastening to typical doors and drawers.
The 1/2 inch base diameter defines the contact area at each mounting point, helping the pull seat flat and cover the drilled hole edges on the cabinet front.
The Pro Value Transitions 2.0 pull with 3-3/4 inch (96 mm) center to center spacing, zinc construction, and oil rubbed bronze finish offers a defined option when you need consistent cabinet hardware across a project. Its 4-5/16 inch length, 31/32 inch projection, and 9/16 inch width set a repeatable profile that keeps doors and drawers visually aligned from one cabinet to the next. The 1/2 inch base diameter and 8-32 x 1 inch screw specification tie the pull to standard cabinet fabrication practices, supporting straightforward layout on new work or replacement jobs.
Sold In: 1 Each