Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Transitions 2.0 pull gives you a 3-3/4 inch (96 mm) center to center cabinet handle that suits standard drilling patterns, which streamlines layout on new builds and keeps replacements straightforward. The pull is part of the Pro Value Series Transitions 2.0 collection, so matching across multiple doors and drawers stays consistent on a job. Its polished chrome finish provides a bright, clean look that pairs well with a wide range of cabinet finishes in kitchens, baths, or shop projects. The pull is made from zinc, giving a solid feel in daily use while remaining workable for cabinet production. Overall length of 4-5/16 inch keeps the grip span comfortable without crowding neighboring hardware on tighter drawer fronts. Base diameter of 1/2 inch provides a defined footprint at each mounting point for a neat visual termination on the face.
This Transitions 2.0 pull is drilled for a 3-3/4 inch (96 mm) center to center spacing, so boring patterns can be laid out accurately before assembly or field drilling. The pull length of 4-5/16 inch leaves modest overhang beyond the holes, supporting alignment on rails without extending into stile joints. A projection of 31/32 inch defines stand-off from the cabinet face, useful when coordinating with adjacent doors or tall drawer fronts. Width of 9/16 inch and base diameter of 1/2 inch frame the footprint that will cover the face material, helping with planning when existing screw marks or finishes are present. The specified 8-32 x 1 inch screw size interfaces with the threaded bosses in the zinc pull, matching a common machine screw standard used in cabinet hardware.
This Pro Value Series Transitions 2.0 pull works as a handle solution for cabinet doors and drawers that use a 3-3/4 inch (96 mm) center to center layout. The 4-5/16 inch overall length suits many residential and light commercial cabinet fronts, sitting comfortably on typical rail heights without crowding. Its polished chrome finish makes it a match for projects that already use chrome faucets, hinges, or bath fittings, helping maintain a consistent hardware look across the room. The zinc construction supports everyday cabinet use in kitchens, baths, or shop furniture where metal pulls are preferred over edge profiles. With a width of 9/16 inch, the pull fits visually on narrower drawer fronts while still offering enough grip surface for users with larger hands.
The 96 mm center to center measurement on this pull allows installers to rely on a known drilling pattern, which reduces layout time and helps keep lines straight across long cabinet runs. A projection of 31/32 inch offers consistent hand clearance, supporting repeated openings without hands contacting the door or drawer face, which can limit wear on finishes. The 1/2 inch base diameter at each end defines a clear landing area for the pull, helping cover minor chipping at the drill holes and delivering a finished look. The 8-32 x 1 inch screw size specification ties this pull to a standard machine thread used widely in cabinet shops, aiding in swapping or matching hardware during future modifications. The SZTR7-PC part number links directly to this Transitions 2.0 polished chrome design, which keeps ordering the same style simple when expanding existing installations.
The Pro Value Transitions 2.0 pull uses a 3-3/4 inch (96 mm) center to center drilling, which aligns with common cabinet hardware layouts and helps speed up boring operations.
The SZTR7-PC pull projects 31/32 inch from the cabinet face, providing hand clearance that supports comfortable gripping without rubbing the door or drawer surface.
The pull length is 4-5/16 inch, so it slightly exceeds the 3-3/4 inch center to center spacing, giving a balanced appearance on most cabinet rails and drawer fronts.
The Transitions 2.0 pull is made from zinc with a polished chrome finish, which provides a smooth, reflective surface suitable for kitchens, baths, and casework projects.
The SZTR7-PC handle uses 8-32 x 1 inch screws, matching a standard cabinet hardware machine screw thread used in many shop and field installations.
Each base on the pull has a 1/2 inch diameter, and the pull width is 9/16 inch, which outlines the contact area on the cabinet face for planning hole coverage.
The Pro Value Transitions 2.0 pull with 3-3/4 inch (96 mm) center to center spacing, polished chrome finish, and zinc construction gives a defined hardware option for cabinets built around this drilling pattern. Its 4-5/16 inch overall length, 31/32 inch projection, and 9/16 inch width set clear proportions for layout on doors and drawers. With the SZTR7-PC part number and 8-32 x 1 inch screw interface, this pull lines up with common cabinet hardware standards. Choose this model when a polished chrome, Transitions 2.0 style handle matches the design direction and drilling you already use.
Sold In: 1 Each