Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Transitions 128 mm center to center pull is a satin nickel cabinet handle from the Pro Value Transitions II Series that provides a consistent 5-1/16 inch mounting span, which simplifies layout across multiple doors and drawers using the same drilling pattern. The pull is made from zinc, giving a solid metal construction that supports regular cabinet and drawer use in residential or shop environments. Its satin nickel finish delivers a muted metallic look that pairs with many hinge and appliance finishes, helping one handle style work across mixed hardware on the same project. The overall length of 7-3/4 inches means the pull visually fits medium to wider drawer fronts, giving enough bar length for a full hand grip. A projection of 1-1/8 inches spaces fingers away from the cabinet face, which supports easy grasping even on thicker door profiles.
The 5-1/16 inch (128 mm) center to center dimension defines the hole spacing for this pull, so panels drilled at that spread can accept the SZTR8-SN part without layout changes. The 7-3/4 inch overall length gives extra handle beyond the screw locations, which helps the bar reach far enough across wider drawer faces to feel substantial when pulled from either side. With a 1-1/8 inch projection, the handle extends off the surface so fingers can wrap behind the bar, supporting smooth door movement even when hands are gloved. The 15/32 inch base diameter focuses the contact point at each end, providing a neat termination at the mounting holes and helping the pull sit flat against the cabinet surface.
The satin nickel Transitions pull belongs to the Pro Value Transitions II Series, positioning it within a coordinated decorative hardware line that supports consistent styling across a whole job. The 7-3/4 inch length lets this pull span a good portion of typical kitchen and bath drawer faces, helping it function as a primary operating point whether the user grasps near the center or toward an end. Its 7/16 inch width keeps the profile lean, so it works on both face-frame and frameless cabinetry without visually crowding narrow rails or stiles. The 5-1/16 inch (128 mm) center to center spacing matches a common drilling standard, allowing this pull to fit cabinets designed around that metric pattern and making it a match for layouts already using 128 mm boring jigs. With a projection of 1-1/8 inches, the pull creates room between the bar and the door or drawer surface, supporting use on thicker fronts while still keeping the handle close enough for a tight, built-in look.
The defined 5-1/16 inch (128 mm) center to center measurement gives installers a fixed reference that can be applied with drilling templates, helping maintain alignment from one cabinet face to the next and reducing layout time on multi-cabinet runs. The consistent 15/32 inch base diameter at each mounting point helps each pull seat uniformly, which supports an even appearance when several handles are viewed down a line of doors. The 7-3/4 inch overall length provides extra visual weight, which helps the pull read correctly on taller doors and wider drawers, reducing the need to mix different handle sizes on the same bank of cabinetry. The 7/16 inch width and 1-1/8 inch projection combine to form a bar that is easy to grab without being obtrusive, supporting everyday operation in kitchens, baths, and shop cabinets that see frequent opening and closing. The satin nickel finish delivers a consistent color and sheen that coordinates with other satin nickel components, helping projects reach a unified decorative hardware look around the workspace or home.
The Pro Value Transitions II pull has a 5-1/16 inch (128 mm) center to center mounting spread, which sets the drilling distance between the two mounting points on the cabinet face.
The SZTR8-SN satin nickel pull measures 7-3/4 inches in overall length, giving a handle size that works well on standard cabinet doors and many drawer widths.
The Transitions II cabinet pull is made from zinc, providing a metal construction that supports regular door and drawer operation in typical cabinet installations.
This cabinet handle has a 1-1/8 inch projection, so the bar stands off the door or drawer enough to allow fingers to wrap comfortably behind it during use.
The pull has a 7/16 inch width and a 15/32 inch base diameter, combining a slim bar profile with compact mounting points for a clean, modern look.
This Pro Value Series pull has a satin nickel finish, providing a soft metallic appearance that coordinates with many satin nickel hinges and other cabinet components.
The SZTR8-SN Transitions pull from the Pro Value Series aligns with 5-1/16 inch (128 mm) center to center layouts, giving installers and cabinet shops a defined drilling pattern to work from. Its 7-3/4 inch length, 7/16 inch width, and 1-1/8 inch projection create a practical, easy-to-grip handle size for many doors and drawers. The zinc construction and satin nickel finish support a cohesive decorative hardware look using standard cabinet materials. For projects built around 128 mm spacing that call for a satin nickel bar pull profile, this Transitions II pull matches both the dimension and finish requirements.
Sold In: 1 Each