Pro Value Transitions 2.0 pull is a zinc cabinet handle in an oil rubbed bronze finish that provides a consistent look across cabinet runs, which helps keep jobs visually uniform from piece to piece. The handle has a 5-1/16 inch center to center drilling (128 mm), so it lines up with standard 128 mm boring for straightforward layout on doors and drawers using common drilling patterns. Overall length is 7-3/4 inches, giving enough hand clearance along wider drawer fronts while still fitting typical cabinet widths in kitchens, baths, and built-ins. A projection of 1-1/8 inches sets the grip out from the fascia, giving fingers room to grab without contacting the door face every time it is opened. Width is 7/16 inch, creating a slim profile that sits neatly on rails and stiles without crowding tight face frame designs.
The 128 mm center to center boring on this SZTR8-ORB cabinet pull sets a fixed distance between mounting points, which lets jigs and templates referenced to 128 mm spacing drop directly onto the work without extra measurement. A 15/32 inch base diameter at each end defines the bearing area on the surface, so the pull seats cleanly over standard drilled holes without covering excessive face detail. With 1-1/8 inch projection from the cabinet, the grip stands off at a predictable distance that fits typical door thicknesses in kitchen and bath cabinetry. The 7/16 inch width holds the pull within narrow frame members or slab door margins, which is helpful when aligning multiple handles along tight vertical or horizontal lines.
This oil rubbed bronze cabinet pull is part of the Transitions 2.0 collection from Pro Value Series, so it supports projects where that collection is used across multiple openings to maintain a coordinated hardware set. The SZTR8-ORB identifier ties this specific handle to the Transitions 2.0 line, which helps keep ordering consistent when repeating the same style on phases of a job or across matching rooms. Its 5-1/16 inch center to center size places it in the common 128 mm category, fitting layouts that are laid out around metric boring while still reading clearly in inches on drawings. At 7-3/4 inches overall length, it visually suits medium and larger cabinet doors and drawer fronts, allowing a single pull style to run from base cabinets to taller pantry fronts for a unified appearance. The oil rubbed bronze finish gives the hardware a dark tone, supporting use alongside other oil rubbed bronze decorative elements on the project for color continuity. With a zinc base material, the pull provides a metal feel at the touchpoint, which many installers and clients expect on frequently used cabinet openings.
The fixed 128 mm center to center drilling makes this 7-3/4 inch cabinet handle a repeatable choice when setting up boring operations, because once the jig is set to that spacing, every door and drawer front drills the same. The 15/32 inch base diameter focuses the load and visual footprint at each screw point, which keeps the handle grounded without overlapping into neighboring edges on narrow rails. A 1-1/8 inch projection establishes a consistent reach off the front surface, creating a regular hand feel from one cabinet to the next in a full room installation. The 7/16 inch bar width keeps the grip relatively slim, which can help align multiple pulls on tight drawer stacks where space is limited between faces. The combination of zinc material and oil rubbed bronze finish ties the tactile metal construction to a specific color tone, allowing the pull to be specified confidently wherever that finish standard is required. The Transitions 2.0 collection designation further anchors this part in a defined style family, so repeated orders can refer back to the same look and dimensions without re-selection.
The Pro Value Transitions 2.0 pull has a 5-1/16 inch (128 mm) center to center dimension, which matches standard 128 mm boring patterns for straightforward drilling and layout on cabinet doors and drawers.
The SZTR8-ORB cabinet pull measures 7-3/4 inches in overall length, giving it a proportion that works well on medium and larger cabinet doors and drawer fronts in many layouts.
This oil rubbed bronze cabinet pull projects 1-1/8 inches from the cabinet face, which provides consistent finger clearance and a predictable hand feel across doors and drawers using this model.
The Transitions 2.0 pull is made from zinc with an oil rubbed bronze finish, combining a metal construction with a dark finish that coordinates with other oil rubbed bronze decorative hardware.
The grip section of this cabinet handle is 7/16 inch wide, giving it a slim profile that fits comfortably on narrow rails or tight drawer stacks without appearing bulky.
Each mounting point has a 15/32 inch base diameter, providing a defined footprint that covers typical drilled hole edges while keeping the contact area compact on cabinet surfaces.
The 128 mm center to center drilling, 7-3/4 inch overall length, and 1-1/8 inch projection make this Pro Value Transitions 2.0 pull a practical choice wherever that drilling standard and size range are required. Zinc construction with an oil rubbed bronze finish ties the handle to projects that specify that color and material combination across decorative hardware. With its 7/16 inch width and 15/32 inch base diameter, the pull fits comfortably on common cabinet door and drawer proportions. For work calling out the SZTR8-ORB part from the Transitions 2.0 collection, this handle delivers the defined dimensions and finish needed to keep installations consistent.
Sold In: 1 Each