Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value Transitions Series pull is a 5-1/16 inch (128 mm) center to center satin nickel handle that provides a consistent grip span across cabinet doors or drawers, helping installers keep hardware alignment uniform from cabinet to cabinet. The pull length of 5-3/8 inches gives a bit of overhang past the screw centers, which creates a solid hand grab area for everyday use on frequently opened fronts. Its satin nickel finish offers a muted metallic look that fits well into many contemporary and transitional cabinet layouts. The pull is made from zinc, so it delivers a metal feel while keeping weight manageable on lighter doors and drawer fronts. With a projection of 1-3/8 inches from the mounting surface, it creates space behind the handle for fingers to clear the cabinet face comfortably.
The center to center measurement of 5-1/16 inches (128 mm) defines the hole spacing for this Pro Value Series pull, giving installers a clear layout target when marking and drilling cabinet fronts. The 8-32 thread size matches the screw specification for this handle, which ties directly to standard cabinet hardware drilling and tapping practices in woodworking shops and on site. A projection of 1-3/8 inches off the face means the pull stands out far enough to grip without feeling bulky, which is useful when lining multiple pulls in a straight run on tall pantry or closet doors. With a slim 3/8 inch width, the handle remains narrow across the grain of the door or drawer, supporting precise visual alignment with rail and stile profiles.
This Transitions 2.0 pull with 5-1/16 inch (128 mm) center to center spacing works well anywhere that drilling on the 128 mm standard is preferred, such as full cabinet runs built around metric line boring systems. The 5-3/8 inch overall length suits typical kitchen, bath, and storage cabinet faces where a mid-size handle looks proportional without dominating narrow fronts. Because the pull has a satin nickel finish, it pairs naturally with other satin nickel decorative hardware & moldings, helping maintain a single finish story across hinges, knobs, and other pulls. The metal zinc construction supports use on both doors and drawers in the same room, keeping the hardware style and feel consistent from base cabinets to wall cabinets. With a projection of 1-3/8 inches, the handle gives comfortable clearance on overlay doors where fingers need to pass behind the pull face.
The defined 5-1/16 inch (128 mm) center to center measurement allows installers to build or use drilling jigs that match this pull, which can save time and help maintain straight hardware lines over long cabinet runs. The 8-32 screw size specification aligns with common cabinet hardware threading, so drilling through the front and engaging the pull follows familiar shop routines. A 3/8 inch width makes it easier to position the handle precisely relative to door edges and rails because the narrow profile gives clear visual reference points when setting reveals. The satin nickel finish helps conceal minor fingerprints and everyday contact, which supports a cleaner appearance on frequently handled doors. The 1-3/8 inch projection also helps reduce contact between hands and the cabinet face, which can limit wear around the hardware location over time.
The pull has a 5-1/16 inch (128 mm) center to center measurement, so drilling holes at that spacing positions the handle correctly on cabinet doors or drawers.
The pull length is 5-3/8 inches, which gives a bit more handle beyond the screw centers, providing a comfortable gripping span on typical cabinet fronts.
The pull is made from zinc with a satin nickel finish, giving a metal feel and a soft, brushed appearance that coordinates with satin nickel decorative hardware.
The projection is 1-3/8 inches from the cabinet face, creating room behind the handle for fingers to clear the door or drawer during everyday use.
The pull has a width of 3/8 inch, giving it a slim profile that supports a clean, linear look on modern cabinet doors and drawers.
The specified screw size is 8-32 x 1 inch, tying the pull to a common cabinet hardware thread standard for straightforward installation.
The Pro Value Transitions Series pull with 5-1/16 inch (128 mm) center to center spacing, 5-3/8 inch length, and 1-3/8 inch projection provides defined measurements for precise cabinet hardware layout. Its zinc construction and satin nickel finish align with decorative hardware & moldings work where a brushed metal look is preferred. For cabinet runs designed around 128 mm drilling patterns, this SZTR9-SN pull offers a consistent handle size and finish that can be repeated across doors and drawers for a unified installation.
Sold In: 1 Each