Pro Value Transitions Series pull gives cabinets and drawers a consistent 5-1/16 inch (128 mm) center to center mounting, which helps align multiple fronts in a straight line across a kitchen or shop run. This pull is part of the Transitions 2.0 collection, so its profile and proportions stay visually consistent anywhere that collection is used in a project. The pull uses zinc material, providing a solid-feeling grip point for regular cabinet or drawer operation. An oil rubbed bronze finish covers that zinc, creating a dark, low-sheen surface that helps fingerprints stand out less during daily use. Overall length of 5-3/8 inch keeps the ends slightly beyond the 128 mm mounting points, giving a bit of finger clearance at the ends while keeping the footprint tight on narrower fronts.
The 128 mm center to center dimension on this Pro Value Series Transitions 2.0 pull defines the drilling distance, so layouts can be built around that specific metric or its 5-1/16 inch equivalent. With a 5-3/8 inch overall length, the pull extends slightly past the screw locations, which positions the grip section centrally over the mounting holes. A 1-3/8 inch projection brings the pull far enough off the face for comfortable hand clearance while limiting how far it sticks into walk paths. The 3/8 inch width creates a narrow bar, so the pull can mount on tight rails and narrow drawer fronts without crowding adjacent details.
This oil rubbed bronze cabinet pull from the Transitions 2.0 collection works wherever a 128 mm center to center layout is preferred, such as long drawer banks that benefit from a repeated metric pattern. The 5-3/8 inch overall length lets it sit proportionally on standard kitchen doors and medium-width drawers without overwhelming narrower frames. Its 1-3/8 inch projection supports comfortable gripping on face-frame or frameless cabinets because the hand clears the front as the drawer slides out. The 3/8 inch width keeps the bar visually slim, which suits cleaner-lined door styles while still giving enough surface to grab. Zinc material allows the pull to function as a consistent, solid touchpoint on frequently used cabinet sections like sink bases or high-traffic drawer stacks.
The 5-1/16 inch (128 mm) center to center sizing on this SZTR9-ORB drawer pull ties directly into common drilling jigs, so repeated hardware locations can stay aligned door to door. When all pulls share that 128 mm pattern, fronts line up visually and hardware spacing reads uniform across the run. The oil rubbed bronze finish introduces a dark tone that helps mask minor handling marks around the grip area during routine use. A 1-3/8 inch projection sets the bar at a predictable stand-off, which helps doors open without fingers dragging against the face. The slim 3/8 inch width lets installers position the pull on narrow rails while maintaining edge distance, supporting cleaner sight lines. The 5-3/8 inch length positions the hand comfortably near the center of the front, which helps balance the pull force when heavier drawers are opened.
The SZTR9-ORB pull has a 5-1/16 inch (128 mm) center to center, a 5-3/8 inch overall length, 1-3/8 inch projection, and 3/8 inch width, which guides hole spacing and visual sizing.
The 128 mm center to center spacing gives a fixed drilling distance, allowing jigs and templates to be set once and reused across doors and drawers for consistent alignment.
This Pro Value Series cabinet pull is made from zinc, providing a solid body that serves as a dependable handhold on frequently used cabinets and drawers.
The Transitions 2.0 pull has an oil rubbed bronze finish, offering a dark tone that coordinates with many cabinet colors during kitchen or shop installations.
This pull has a 1-3/8 inch projection, setting the grip away from the cabinet surface to provide finger clearance during opening and closing.
The SZTR9-ORB cabinet pull belongs to the Transitions 2.0 collection, helping projects keep a coordinated style when that collection is used throughout.
This Pro Value Transitions Series pull combines a 5-1/16 inch (128 mm) center to center pattern with a compact 5-3/8 inch length, supporting consistent layouts on cabinet doors and drawers. The zinc construction and oil rubbed bronze finish offer a solid, dark-toned grip point that suits many wood finishes. With a 1-3/8 inch projection and 3/8 inch width, it balances clearance and a slim profile on face-frame or frameless fronts. For projects built around the Transitions 2.0 collection and 128 mm spacing, this SZTR9-ORB pull aligns visual style with practical cabinet operation.
Sold In: 1 Each