Transitions 2.0 polished chrome pull from the Pro Value Series gives cabinets and drawers a defined 5-1/16 inch (128 mm) center-to-center grip that sets clear drilling points and simplifies layout on new or replacement fronts. The pull body uses zinc material, which provides a solid feel in the hand while keeping overall weight manageable for standard cabinet construction. A polished chrome finish creates a bright, reflective surface that visually matches other polished chrome decorative hardware in the same run. The 5-3/8 inch overall length keeps the ends slightly past the mounting holes, which helps cover previous drill marks in many typical cabinet layouts. A 1-3/8 inch projection stands the handle off the face enough for a comfortable finger clearance on doors and drawers. The 3/8 inch width presents a slim profile across the face, giving a clean hardware line on both framed and frameless cabinet designs.
The 5-1/16 inch (128 mm) center-to-center mounting dimension gives a fixed spacing that guides hole locations for both new installations and replacements using the same pattern. With a 5-3/8 inch overall length, the ends of the Pro Value Series pull extend slightly beyond the screw line, which helps visually balance the hardware on standard drawer widths. The 1-3/8 inch projection defines how far the pull stands off the face, affecting both grip comfort and clearance around neighboring doors. A 3/8 inch width keeps the pull narrow across the rail, so it seats well even on slimmer drawer fronts without crowding the panel detail. Together, these dimensions support consistent alignment when installing multiple SZTR9-PC pulls along a bank of cabinets.
The Pro Value Transitions Series pull with 5-1/16 inch (128 mm) center to center spacing is suited for cabinet doors and drawers built around this common hole pattern, so it can serve in both new layouts and direct replacements using the same spacing. Its 5-3/8 inch length works well on medium-width doors and drawer fronts where a pull needs to visually span enough surface without reaching edge-to-edge. The 1-3/8 inch projection positions the gripping surface away from the cabinet face, supporting use on doors near adjacent walls or neighboring fronts where some clearance is needed. With a 3/8 inch width, the pull sits comfortably on narrower rails used in many kitchen and bath cabinets, keeping the hardware centered without overwhelming the stile or drawer front. The polished chrome finish visually aligns with other polished chrome decorative hardware elements, allowing this SZTR9-PC handle to tie into broader room hardware schemes.
The defined 5-1/16 inch (128 mm) center-to-center spacing allows installers to reuse standard drilling templates, which supports faster layout when running multiple cabinets in a project. Because the overall length is slightly greater at 5-3/8 inch, the pull can help conceal minor surface marks around the mounting points, which is useful during retrofit work on existing fronts. The 1-3/8 inch projection influences how hands engage the pull, giving fingers room behind the zinc body so users can grasp without dragging knuckles on the cabinet face. Its 3/8 inch width reduces the visual footprint, which can help maintain clean lines on modern cabinet styles that rely on slimmer hardware. The zinc construction, paired with the polished chrome finish, creates a unified handle that stands up to frequent door and drawer cycles typical in kitchen, bath, or storage installations where the SZTR9-PC is used repeatedly.
The Pro Value Transitions Series SZTR9-PC pull has a 5-1/16 inch (128 mm) center to center, which sets precise hole spacing for consistent cabinet and drawer installations.
The Transitions 2.0 polished chrome pull measures 5-3/8 inch in overall length, giving slight overhang past the mounting points for balanced coverage on typical fronts.
The SZTR9-PC cabinet handle is made from zinc, providing a solid metal pull body suited to repeated operation on cabinet doors and drawers.
This 128 mm center to center pull has a 1-3/8 inch projection, setting the grip away from the cabinet face for practical finger clearance.
The Pro Value Transitions cabinet pull has a 3/8 inch width, giving a slim front profile that works well on narrow cabinet rails and drawer fronts.
This Pro Value Series pull uses a polished chrome finish, matching other polished chrome decorative hardware for a consistent appearance across a project.
The Pro Value Transitions Series 5-1/16 inch (128 mm) center to center polished chrome pull combines zinc construction, 5-3/8 inch overall length, and 1-3/8 inch projection to cover common cabinet layouts with a defined grip position. The 3/8 inch width and polished chrome finish give a streamlined appearance that coordinates with polished chrome decorative hardware. For cabinet doors and drawers built around a 128 mm mounting pattern, the SZTR9-PC part number from Wurth Baer Supply offers a consistent handle size that supports repeatable layout across kitchens, baths, and storage runs.
Sold In: 1 Each