Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Transitions 2.0 satin nickel pull gives a cabinet installer a 5-1/16 inch (128 mm) center to center handle that lines up cleanly with standard drilling for many modern layouts. The Pro Value Series brand and Berenson product class identify this pull as part of a coordinated decorative hardware line that keeps projects visually consistent across multiple doors and drawers. Its satin nickel finish delivers a muted metallic look that works in both residential and commercial cabinet runs where a bright, reflective surface is not desired. The pull length of 5-1/2 inches provides hand clearance across the face of cabinet doors or drawers, while the 1-3/16 inch projection brings the grip away from the front enough to grasp comfortably. The 15/32 inch width gives a slim profile on the face, which matters when aligning with tight rail or stile dimensions.
The 128 mm center to center dimension on this Pro Value Series Transitions 2.0 pull establishes a predictable mounting layout that suits repetitive cabinet work. The rated 5-1/2 inch overall length gives a small amount of overhang beyond the mounting holes at each end, which matters when centering the pull on narrower rails or drawer fronts. With a 15/32 inch base diameter, the contact point at each end stays compact, which helps when mounting near edge profiles or decorative routing. The 1-3/16 inch projection defines how far the pull stands off the surface, so installers can account for finger clearance in front of adjacent doors, appliance panels, or side walls. The 15/32 inch width provides a slender grip, which is useful where hardware must stay visually light but still functional on frequently used cabinet doors and drawers.
This Pro Value Series Transitions 2.0 satin nickel pull is part of a decorative hardware and moldings category focused on handles and pulls, so it is designed for cabinet and similar door or drawer applications. The 5-1/16 inch (128 mm) center to center size aligns with a widely used drilling standard, which helps when laying out matching pulls across kitchen, bath, or shop cabinetry built around that spacing. Because the pull length is 5-1/2 inches, it scales well on medium-width fronts where very small knobs may look undersized. The satin nickel finish supports use in projects where a neutral metal tone is desired, including pairing with many hinge and fixture finishes in the same color family. The zinc construction keeps the pull within the Pro Value Series line, which supports consistent material and finish across multiple hardware points in the same installation.
The 128 mm center to center measurement on the SZTR10-SN pull provides a fixed reference that works well with drill jigs and CNC programs set for that spacing, helping reduce layout time on production or multi-unit jobs. Its 15/32 inch base diameter minimizes the footprint at each fastener point, which is important when installing near narrow rails or decorative profiles where larger bases could overhang or crowd edges. The 1-3/16 inch projection places the gripping surface out from the cabinet face, which helps fingers clear door edges and adjacent fronts during repeated use. The 15/32 inch width keeps the handle slim, which can help maintain clean lines on contemporary cabinet designs while still giving a defined edge for pulling. Together, these dimensions support predictable alignment and a consistent look when the same pull is repeated across many doors and drawers on a project.
This Transitions 2.0 satin nickel pull uses a 5-1/16 inch (128 mm) center to center size, which sets the exact hole spacing for drilling cabinet doors and drawers.
The SZTR10-SN satin nickel pull has a 5-1/2 inch overall length, giving slight overhang beyond the mounting points for balanced coverage on cabinet fronts.
This cabinet pull is made from zinc with a satin nickel finish, providing a solid metal feel with a subdued metallic appearance on installed cabinetry.
The Transitions 2.0 pull projects 1-3/16 inches from the cabinet surface, setting hand clearance and helping plan for nearby doors or obstacles.
This pull has a 15/32 inch width and a 15/32 inch base diameter, creating a slim profile and compact mounting footprint on rails and drawer fronts.
This satin nickel pull is part of the Pro Value Series Transitions 2.0 line in the Berenson handles and pulls product class, supporting coordinated hardware selections.
This Pro Value Series Transitions 2.0 satin nickel pull combines a 128 mm center to center drilling pattern with a 5-1/2 inch overall length, which suits many cabinet door and drawer sizes. The zinc construction and satin nickel finish supply a consistent look across projects, while the 1-3/16 inch projection and 15/32 inch width define a slim, functional grip. For work built around 5-1/16 inch spacing, this SZTR10-SN pull from Wurth Baer Supply provides a defined hardware choice that fits established layouts and repeatable cabinet runs.
Sold In: 1 Each